Author Topic: Bill Large barreled rifle...???  (Read 6275 times)

Offline Skychief

  • Hero Member
  • *****
  • Posts: 652
Bill Large barreled rifle...???
« on: March 14, 2010, 05:27:49 AM »
I bought a rifle with a Bill Large barrel on it today.

Can anybody tell me approximately when he made it?  It has a "L" stamped on the muzzle.   On a flat on the left side appears "W. M. LARGE" in a rainbow (crescent) shape.

It is 45 caliber with 8 grooves,  a LEFT hand twist, and 1" across the flats.

Any insight into its age and/or ANY other information about Bill Large's barrels is greatly appreciated!   Thanks, Skychief.

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19483
    • GillespieRifles
Re: Bill Large barreled rifle...???
« Reply #1 on: March 16, 2010, 07:46:36 PM »
I have a Bill Large barrel on a Leonard Reedy rifle built by Earl Lanning. Earl said he built the rifle in the Mid 60's. The barrel has J.J.J.J in an arc with an L. underneath it.
Dennis
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline Skychief

  • Hero Member
  • *****
  • Posts: 652
Re: Bill Large barreled rifle...???
« Reply #2 on: March 17, 2010, 01:15:33 AM »
Thanks Dennis.   I suppose my barrel predates yours (no JJJJ).   Is your barrel rifled with a left hand twist?

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19483
    • GillespieRifles
Re: Bill Large barreled rifle...???
« Reply #3 on: March 17, 2010, 11:27:50 PM »
Never checked. When I push a patch in the ram rod turns clock wise in relation to the front sight. This barrel appears never to have been fired. Its as smooth as silk!
Dennis
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Daryl

  • Guest
Re: Bill Large barreled rifle...???
« Reply #4 on: March 29, 2010, 02:49:52 AM »
I had a Bill Large barrel, made early 80's, I think - that had the J's.

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: Bill Large barreled rifle...???
« Reply #5 on: March 29, 2010, 06:10:52 AM »
I had two of Bills barrels, bought in 1973 or so and they both had jjjj ranch & machine shop if I remember corectly.

Offline Eric Krewson

  • Hero Member
  • *****
  • Posts: 2254
Re: Bill Large barreled rifle...???
« Reply #6 on: March 29, 2010, 10:16:10 PM »
Here is a barrel from the early 70s. This is only a guess because I don't know when this gun was built. The lock is a Bob Roller lock marked with a "73" on the inside of the lock plate. I assume this stands for 1973.


Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Bill Large barreled rifle...???
« Reply #7 on: April 10, 2010, 04:04:29 PM »
...interesting application of the "G".
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Roger B

  • Hero Member
  • *****
  • Posts: 1644
  • You wouldn't have a snack, would you?
Re: Bill Large barreled rifle...???
« Reply #8 on: April 11, 2010, 01:34:41 AM »
Taylor, Bill didn't spend a lot of time on details.  I once bought a barrel from him that was 8 sided, but was not even close to octagonal.  Another really senior shooter in my area once ordered a .54 cal half stock type barrel & received exactly what he ordered.  The only problem was that it appeared as if Bill had used it as some type of a backer for something else that he was drilling, or perhaps used it to check his drill stop with, & it basically looked like a Swiss cheese.  Nothing into the bore mind you, just riddled.  Full retail.  He exchanged it without comment.
Roger B.
Never underestimate the sheer destructive power of a minimally skilled, but highly motivated man with tools.

Ben Gorey

  • Guest
Re: Bill Large barreled rifle...???
« Reply #9 on: April 12, 2010, 05:34:12 AM »
My Bill Large barrel from middle 1960's   has no J's.