Author Topic: Advise on new project.  (Read 3515 times)

beleg2

  • Guest
Advise on new project.
« on: May 18, 2010, 04:03:24 AM »
Hi,
Beg your pardon if this is a little stupid question:
I have some round .50 rifled barrels and two sets of back action shotgun locks that I can transform in percussion locks.

What kind of traditional rifle can I make with them?
Is there some kind of poor boy rifle that have round barrel  and back action lock?

Thanks
Martin

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas  A Curran
Re: Advise on new project.
« Reply #1 on: May 18, 2010, 04:20:36 AM »
Plenty of  mid-late 19th century guns used the back action locks. New York State guns, Massachusetts rifles, schuetzen target guns, etc all use back action locks.

Tom
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

beleg2

  • Guest
Re: Advise on new project.
« Reply #2 on: May 18, 2010, 02:25:11 PM »
Thanks Tom.
Had those rifles round barrels?
I will try to find some pictures.
Thank you very much.
Martin

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas  A Curran
Re: Advise on new project.
« Reply #3 on: May 18, 2010, 02:39:26 PM »
Martin, is your barrel round tapered, or straight cylinder?

Tom
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

beleg2

  • Guest
Re: Advise on new project.
« Reply #4 on: May 18, 2010, 04:03:02 PM »
They are straight cylinder and forgot to mention that they are very short on ml standard from 21" to 28".
I have a dozen of different length all have .866" diameter.

Thank you very much for helping.
I used them for some underhammer but would like to work on a different kind of rifle.

Martin

Offline Longknife

  • Hero Member
  • *****
  • Posts: 2094
Re: Advise on new project.
« Reply #5 on: May 18, 2010, 04:44:53 PM »
Begleg, there were many over/under percussion rifles made with round barrels in the 19th century. You just need to make a longer "nose" on the left lock to reach the lower barrel....Ed
Ed Hamberg

beleg2

  • Guest
Re: Advise on new project.
« Reply #6 on: May 19, 2010, 04:31:55 AM »
Thanks Longknife.
The O/U double rifle sound like a good idea.
Never liked those asymmetric hammers, where they popular back on 1800s?

Thanks
Martin