Author Topic: Gun makers in Texas  (Read 4361 times)

Andy A

  • Guest
Gun makers in Texas
« on: May 20, 2010, 01:55:44 AM »
Guys,
Do you know of a book on riflesmiths in Texas during the 19th century? I am curious what was made here and by whom.

Andy

Offline jpldude

  • Full Member
  • ***
  • Posts: 141
John L.
Houston, Texas

Andy A

  • Guest
Re: Gun makers in Texas
« Reply #2 on: May 21, 2010, 04:30:54 AM »
Thanks John!
Andy A

Offline DaveL

  • Starting Member
  • *
  • Posts: 26
Re: Gun makers in Texas
« Reply #3 on: May 22, 2010, 05:52:13 AM »
I like some of the rifles on this site for ideas of the plains rifles from mid nineteenth century Texas.

http://www.texasguntrade.com/texassportingrifles.htm


Andy A

  • Guest
Re: Gun makers in Texas
« Reply #4 on: May 22, 2010, 08:02:11 PM »
Any idea where these plains rifles are located now? It would be nice to go see them and get some measurements. if they are in private hands, probably not but if in ame museums it would be possible to measure.

Andy A

Offline jpldude

  • Full Member
  • ***
  • Posts: 141
Re: Gun makers in Texas
« Reply #5 on: May 23, 2010, 01:16:58 AM »
Hey Andy, we went to Fredericksburg, jeez, probably 15 - 20 years ago & there was a museum on the main drag run by little old ladies & they had what I would call a "Texas Hawken", half stock, heavy barrel, underrib, etc supposidly made by the local gunsmith back in the day. The lock & barrel were store bought from up north, but it was still pretty cool. I have no idea if the museum is still there, but if it's not, mosey over & see the Admiral Nimitiz museum, it's good too.

Rgds,

John
John L.
Houston, Texas

Offline Dale Campbell

  • Sr. Member
  • ****
  • Posts: 327
Re: Gun makers in Texas
« Reply #6 on: May 24, 2010, 05:15:56 PM »
It's not a Hawken, but there's a flint half-stock plains rifle.
Best regards,
Dale