Author Topic: Field Stand for Rifles  (Read 4233 times)

nc_cooter

  • Guest
Field Stand for Rifles
« on: June 13, 2010, 09:54:14 PM »
Needed a stand to hold my rifles while paper shooting. Used some scrap 1/2" square and round stock I had in the forge. Also made an open eyelet to hold my range rod. All I need to add is a piece of scrap carpet with a couple of half inch holes and it will be ready for use.
Thanks for looking,
Mike


Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Field Stand for Rifles
« Reply #1 on: June 13, 2010, 10:50:56 PM »
No bottom plate....Is it intended that the two legs at the bottom be driven into the ground???  Good news and bad news at my range....cement floor!! :o :o ::)  Way kewl idea though! nice work too!
« Last Edit: June 13, 2010, 10:51:37 PM by DrTimBoone »
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

nc_cooter

  • Guest
Re: Field Stand for Rifles
« Reply #2 on: June 13, 2010, 10:59:18 PM »
Dr T, no cement where I shoot. Have to drive my target holder in the ground also.
Thanks for the compliments.

RoaringBull

  • Guest
Re: Field Stand for Rifles
« Reply #3 on: June 13, 2010, 11:37:19 PM »
I've seen a couple of variations of these and this is a good one!  Very nice indeed.

No cement where I shoot either!

The Professor

  • Guest
Re: Field Stand for Rifles
« Reply #4 on: June 15, 2010, 05:52:43 AM »
Look under "shooting accessories".  Some plans there that would work for cement ranges.
http://vbwhiz.isa-geek.net/plans/

Ky Ken

  • Guest
Re: Field Stand for Rifles
« Reply #5 on: June 15, 2010, 12:59:05 PM »
Nice job  Mike

Offline Nate McKenzie

  • Hero Member
  • *****
  • Posts: 1019
  • Luzerne Co. PA
    • Nathan McKenzie Gunmaker
Re: Field Stand for Rifles
« Reply #6 on: June 15, 2010, 11:25:41 PM »
Check out cowboy action shooting gun carts.