Author Topic: Leather Wrapped Horns?  (Read 6298 times)

RoaringBull

  • Guest
Leather Wrapped Horns?
« on: June 24, 2010, 12:37:53 AM »
I was looking at the pics on the blog and found the one of the old leather wrapped horn?  Was that very common and is that two pieces of leather?

Hay I may be able to do a horn like that!?!

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Leather Wrapped Horns?
« Reply #1 on: June 24, 2010, 12:48:15 AM »
Those were done to repair a horn with a hole worn in it or a crack.    The originals that I have seen were wrapped in one pieces of leather stretched very tight around the horn.   There was one line of stitching.   I have only seen very thin hides applied and they must have been applied wet.  

As to how common they are, I have seen them often enough.   As to a percentage, someone else will have to answer that.   

Mark E.

« Last Edit: June 24, 2010, 12:52:55 AM by Mark Elliott »

Offline LRB

  • Hero Member
  • *****
  • Posts: 1567
    • WICK ELLERBE
Re: Leather Wrapped Horns?
« Reply #2 on: June 24, 2010, 12:54:40 AM »
   That on an old horn is to repair a crack. On recent horns, it is usually a faux repair, or sometimes, still a real repair in order to still be able to sell it, and have it look correct as a repaired old horn. Oh yeah, usually doe skin rawhide, stitched wet.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 17986
  • AKA TimBuckII
Re: Leather Wrapped Horns?
« Reply #3 on: June 24, 2010, 01:13:15 AM »
 Here's a couple. (These are originals) Done for repair I'm sure, Somewhere I saw one that had a squirrel skin complete with ears on it.

 Tim C.



« Last Edit: June 24, 2010, 03:31:24 PM by Tim Crosby »

RoaringBull

  • Guest
Re: Leather Wrapped Horns?
« Reply #4 on: June 24, 2010, 01:27:15 AM »
Question is which end of the squirrel was the stopper stuck into??? ;D

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Leather Wrapped Horns?
« Reply #5 on: June 24, 2010, 07:01:19 AM »
Tim
I think the horn with the squirel skin patch is in Powder Horns and their Architecture by Grant.  Now that would be a neat horn to duplicate.  Unless your a squirel.
Steve
Steve Skillman

longhunter1757

  • Guest
Re: Leather Wrapped Horns?
« Reply #6 on: June 25, 2010, 02:54:03 PM »
Question is which end of the squirrel was the stopper stuck into??? ;D

You owe me a new keyboard! ;)

RoaringBull

  • Guest
Re: Leather Wrapped Horns?
« Reply #7 on: June 25, 2010, 03:12:32 PM »
Question is which end of the squirrel was the stopper stuck into??? ;D

You owe me a new keyboard! ;)



heheheheheheheheheheheheheh....

Offline Chuck Burrows

  • Hero Member
  • *****
  • Posts: 1218
    • Wild Rose Trading Company
Re: Leather Wrapped Horns?
« Reply #8 on: June 25, 2010, 04:03:17 PM »
IMO deer or elk rawhide works even better than leather and was fairly common fixit especially in the West. Rawhide will work fine even in areas where it's wetter/more humid if it's sealed with varnish.
As noted it's done with one piece of hide normally - I like to use the so-called baseball stitch which is PC - the rawhide wrapped Mariano Modena/Medina horn was sewn thusly.
I've done several over the years - here's one from a few years ago - it was actually to repair the horn where it had been scraped/sanded through, making a couple of nice holes. You can see the stitching along the top - my preferred method, but some folks like the seam along the bottom.



Two roads diverged in a wood, and I,
I took the one less traveled by,
And that has made all the difference.

RoaringBull

  • Guest
Re: Leather Wrapped Horns?
« Reply #9 on: June 25, 2010, 04:05:41 PM »
Do you cut the leather a little small while dry, then wet it and sew it real snug while wet and let it dry to get that tight form fitted look? 

Offline Chuck Burrows

  • Hero Member
  • *****
  • Posts: 1218
    • Wild Rose Trading Company
Re: Leather Wrapped Horns?
« Reply #10 on: June 25, 2010, 04:10:16 PM »
With the rawhide I cut a little large, wet it to the correct temper, and then use a couple of spots of glue (traditionally hot hide glue or you can "cheat" and use Super Glue-the gel works best) to hold it in place and then trim as I go along - once it dries it will draw up drum tight.
Two roads diverged in a wood, and I,
I took the one less traveled by,
And that has made all the difference.