« previous next »
Pages: [1]   Go Down

Author Topic: Horn With Four Bands And Pewter Tip  (Read 3055 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18387
  • AKA TimBuckII
Horn With Four Bands And Pewter Tip
« on: August 01, 2010, 12:42:35 AM »
   This one is about 11” around the outside curve. The Walnut base is about 2 ¼”, the horn is fit inside the base and held by 4 steel pins. The pewter tip is about 2”s and is held by three steel pins, they are almost invisible. The 4 horn bands are pinned on with 2 steel pins each. Finish is AF and brown shoe polish, oil on the base. It has the standard Hickory stopper.

 Tim C.






Logged

RoaringBull

  • Guest
Re: Horn With Four Bands And Pewter Tip
« Reply #1 on: August 01, 2010, 01:27:22 AM »
Something about this one that speaks to me Tim...really like it for some reason.
Logged

eseabee1

  • Guest
Re: Horn With Four Bands And Pewter Tip
« Reply #2 on: August 01, 2010, 01:43:29 AM »
nice job Tim
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Horn With Four Bands And Pewter Tip
« Reply #3 on: August 01, 2010, 05:52:45 AM »
Tim,
That is one nice horn.  It speaks to me also.  I really like it.
DMR
Logged

smorrison

  • Guest
Re: Horn With Four Bands And Pewter Tip
« Reply #4 on: August 01, 2010, 07:04:52 AM »
Very nicely done Tim.  I'm with the others, there is something about this one.  It does speak to you.

Scott
Logged

Trkdriver99

  • Guest
Re: Horn With Four Bands And Pewter Tip
« Reply #5 on: August 01, 2010, 03:10:48 PM »
It is saying "Ronnie I would look great on your side". That is a wonderful looking one. Have to be one of my favorites, You hit it on this one. Now if I were just talented  :D

Ronnie
Logged
Pages: [1]   Go Up
« previous next »