« previous next »
Pages: 1 [2]   Go Down

Author Topic: harder stock finish  (Read 14103 times)

Offline Model19

  • Jr. Member
  • **
  • Posts: 71
  • Why read fiction, history is fascinating enough
Re: harder stock finish
« Reply #25 on: October 07, 2011, 01:53:34 PM »
This has been a heck of an interesting thread.  I've done several modern stocks with Tru-oil and have liked the results.  Next time I'll try cutting it as suggested.  Some many science experiments to try  ;D!
Logged
Strawberry Banke, Greenland and Falmouth
Anthony Brackett's roots go deep

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: harder stock finish
« Reply #26 on: October 07, 2011, 03:51:08 PM »
The hardest finish is only as hard as the wood underneath.

Walnut can be had in a variety of densities, depending where it was grown, how old the tree, etc.  But if it's the soft variety, a hard finish will damage easily, and crack, flake around dents in the wood. An oil finish might be more suitable, easily repaired with an occasional rub of fresh oil.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: harder stock finish
« Reply #27 on: October 07, 2011, 05:36:00 PM »
OH yeah.  I refinished a modern w/ oils a long time ago and love it, but didn't have a clue what I was doing besides following the 1935 advice of Clyde Baker and what i could cipher from the teachings of Elmer Keith.  There were no forums then-just bbs's and email reflectors.

Now i'm really learnin'.  thanks all.

Wait what?  now i have to search up the boiling threads?!  Lime, no problem.  It's sold by the ton in town.  No one spake of limestome before.
Logged
Hold to the Wind

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: harder stock finish
« Reply #28 on: October 07, 2011, 08:34:43 PM »
Quote from: WadePatton on October 07, 2011, 05:36:00 PM
OH yeah.  I refinished a modern w/ oils a long time ago and love it, but didn't have a clue what I was doing besides following the 1935 advice of Clyde Baker and what i could cipher from the teachings of Elmer Keith.  There were no forums then-just bbs's and email reflectors.

Now i'm really learnin'.  thanks all.

Wait what?  now i have to search up the boiling threads?!  Lime, no problem.  It's sold by the ton in town.  No one spake of limestome before.

It will turn up if you find the threads on making the oil.
Nor is it anything "new".
Dan
Logged
He who dares not offend cannot be honest. Thomas Paine
Pages: 1 [2]   Go Up
« previous next »