Author Topic: Couple of Differnet Types Of Horn  (Read 5504 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18291
  • AKA TimBuckII
Couple of Differnet Types Of Horn
« on: August 12, 2010, 08:14:01 PM »
  Woodsrunner asked about blowing horns on another post and it reminded me of this one, I do not think I have posted pics before. The other was done just beacuse the horn looked right.
 The first is a Hunting/Signal blowing horn it is about 14" around the outside curve (OC). The bands are pinned on.
The mouth piece is turned horn and pinned on.

 The second is a hearing horn or trumpet, it is about 16" around the OC. The bands are pinned on. Since the pics were take a hand strap has been added just below the second band. And yes it works very well.

 Tim C.











« Last Edit: August 13, 2010, 01:00:42 AM by Tim Crosby »

Offline T.C.Albert

  • Global Moderator
  • Hero Member
  • *
  • Posts: 3563
    • the hunting pouch
Re: Couple of Differnet Types Of Horn
« Reply #1 on: August 12, 2010, 08:28:54 PM »
Nice horns Tim...seeing them reminds me that I have an original
banded blowing horn with an applied mouth piece I need to photograph for you...I think blowing, or hound horns were way more popular than we give them credit for...till break action shot guns were substituted for blowing in the pack in the early cartridge days...or so the tale goes up here...
TCA
"...where would you look up another word for thesaurus..."
Contact at : huntingpouch@gmail.com

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1228
Re: Couple of Differnet Types Of Horn
« Reply #2 on: August 12, 2010, 11:18:21 PM »
Here's a related question to both the Tims';  when building the tip, is there a reed inserted or is tip just has a small diameter hole to create the sound?

Gary
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18291
  • AKA TimBuckII
Re: Couple of Differnet Types Of Horn
« Reply #3 on: August 13, 2010, 12:21:53 AM »
 

 Thanks Tim I would like to see that.

 Gary, I use a small diameter hole. I have heard tell of tuning them, maybe by opening up the hole. I'm not sure how its done but I would like to know.

 Tim C.

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Couple of Differnet Types Of Horn
« Reply #4 on: August 13, 2010, 12:50:16 AM »
Tim
Really cool. Course, they would look really good with plugs in them too.
Steve
Steve Skillman

Offline Larry Pletcher

  • Hero Member
  • *****
  • Posts: 1748
    • Black Powder Mag
Re: Couple of Differnet Types Of Horn
« Reply #5 on: August 13, 2010, 03:36:54 AM »
I have one that I push a trumpet mouth piece into to blow.  Since I have been using a lathe for horns, I'd be tempted to turn a mouth piece from horn, using a trumpet mouth piece as a pattern.  The trumpet tubing is 5/16" I think.  I'll check on that.  The mouth pieces have a slight taper on the end gong into the trumpet.

Some are very plain; others more ornate.  A plain one would fit in best I think.

Regards,
Pletch
Regards,
Pletch
blackpowdermag@gmail.com

He is no fool who gives up what he cannot keep to gain what can never be taken away.

Kayla Mueller - I didn't come here of my own accord, and I can't leave that way.  Whoever brought me here, will have to take me home.

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Couple of Differnet Types Of Horn
« Reply #6 on: August 13, 2010, 04:31:00 AM »
Sheeesh I just got fit for two hearing aids at the VA today,  Will you take medical insurance for one of your ear trumpets???
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Offline John SMOthermon

  • Hero Member
  • *****
  • Posts: 538
  • John SMOthermon
Re: Couple of Differnet Types Of Horn
« Reply #7 on: August 13, 2010, 04:41:06 AM »


 I have heard tell of tuning them, maybe by opening up the hole. I'm not sure how its done but I would like to know.

 Tim C.

I have my Dads old fox hound horn i turned into a powder horn. I never could blow it the way he did so i thought at least this way i could get some use from it.  If i remember correctly he told me he changed the sound or tuned the horn just by moving his lips on the horn. 
Smo

Good Luck & Good Shootin'

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Couple of Differnet Types Of Horn
« Reply #8 on: August 13, 2010, 10:14:50 PM »
Dr. Tim
You know that married men go deaf for a good reason. My dad called it selective hearing
Steve
Steve Skillman

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Couple of Differnet Types Of Horn
« Reply #9 on: August 14, 2010, 08:40:53 PM »
Hearing aids have on/off switches!!   ;D ;D
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

LURCHWV@BJS

  • Guest
Re: Couple of Differnet Types Of Horn
« Reply #10 on: August 19, 2010, 05:02:43 PM »
A small de-burring tool worked quite well on six Shofars I made a couple of years ago. You really need tight lips to get a good sound from them.  I have a rams horn that is almost impossible to blow.

                Rich