Author Topic: ALR Museum Gunsmith: Oblinger, .....Piqua, Ohio ... A half stock  (Read 3385 times)

Offline Hurricane ( of Virginia)

  • Library_mod
  • Hero Member
  • *
  • Posts: 2081
ALR Museum Gunsmith: Oblinger, .....Piqua, Ohio ... A half stock
« on: September 28, 2010, 11:21:45 PM »
A fine "plain" halfstock Ohio gun with obvious quality craftmanship.

Here is the URL:

http://americanlongrifles.org/forum/index.php?topic=12379.0

Post your comments as a reply here, please.

The Museum Committee
« Last Edit: September 29, 2010, 06:17:17 PM by hurricane »

msmith

  • Guest
Re: ALR Museum Gunsmith: Oblinger, .....Piqua, Ohio ... A half stock
« Reply #1 on: September 28, 2010, 11:58:10 PM »
Wrong picture.

Offline Hurricane ( of Virginia)

  • Library_mod
  • Hero Member
  • *
  • Posts: 2081
Re: ALR Museum Gunsmith: Oblinger, .....Piqua, Ohio ... A half stock
« Reply #2 on: September 29, 2010, 06:18:09 PM »
Picture changed. Thanks Mike
Hurricane

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7496
  • Born in Kentucke, just 250 years late
Re: ALR Museum Gunsmith: Oblinger, .....Piqua, Ohio ... A half stock
« Reply #3 on: September 29, 2010, 06:33:24 PM »
It looks like there might be part of a letter preceding the O in Oblinger.  Since the barrel is also signed J. H. Johnston, I wonder if Oblinger was a dealer/reseller.  Thoughts?

-Ron
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

scooter

  • Guest
Re: ALR Museum Gunsmith: Oblinger, .....Piqua, Ohio ... A half stock
« Reply #4 on: September 29, 2010, 07:06:49 PM »
Not thoughts, my friend, but fact. The reason we spent hundreds of hours putting together the 5 vols on OH long rifle makers and allied tradesmen was to show who made guns where at least in OH. The Oblinger family of Miami County [obviously Ohio] included: Charles; Charles M.; David, Jr.; John; John W.; Solomon; Walter; and Wilson. I have no idea if Sellers took these names and if so if he copied them correctly. Try vol III of Ohio Gunsmiths & Allied Tradesmen. They were both gunmakers/ gunsmiths and sporting goods dealers. The Johnson was most likely J. H. Johnston, the proprietor of the Great Western Gun Works. His barrel may have been recycled or he may have sold barrels. In this case, based on my photography of Oblinger family guns, I'd judge that 1 of them made this gun.