« previous next »
Pages: [1] 2   Go Down

Author Topic: Jim Kibler  (Read 24336 times)

Flinter

  • Guest
Jim Kibler
« on: November 01, 2010, 08:09:18 AM »
This summer I ordered a .54 caliber wood patch box flintlock from Jim, and he said it would take about two years. He e-mailed me a few months ago and he said he would have one ready in October. He asked if I wanted it, and I said, “Sure!” I do not know what happened, but I am tickled to death. The photos were taken at an original log cabin built in the mid 1870s, and a few were taken behind the log cabin beside a REAL working out house. 

Jim said the overall stock architecture and rifle design is a compellation of his own ideas and work produced by Lancaster and Moravian gunsmiths. This rifle might represent a piece produced during the 1770’s time period. The rifle is stocked in relatively straight grain maple. The 54 caliber barrel was produced by Rice Barrels and lock is a modified Jim Chambers Early Ketland. The rifle decoration is loosely based on work by Moravian gunsmiths working in Pennsylvania and North Carolina during the 1760’s-1770’s. Wood surfaces of this rifle were created using very little abrasive paper, but rather relying on careful chisel, file and scraper work. This produces a surface which is very representative of period work. Overall the rifle has been finished with a slight patina, representing a used but well cared for piece.

Jim is going to post a little more professional pictures on the Contemporary Makers web site some time next week. My daughter Laura took the photos posted here.



http://img213.imageshack.us/img213/6426/42976067.jpg

http://img844.imageshack.us/img844/9161/18533692.jpg

http://img301.imageshack.us/img301/5376/53976894.jpg

http://img221.imageshack.us/img221/5515/64278373.jpg

http://img826.imageshack.us/img826/966/39683843.jpg

http://img109.imageshack.us/img109/1881/59775271.jpg

http://img52.imageshack.us/img52/6593/35445422.jpg

http://img220.imageshack.us/img220/7446/10ama.jpg

http://img707.imageshack.us/img707/4176/14ai.jpg

http://img179.imageshack.us/img179/3456/15ack.jpg

http://img838.imageshack.us/img838/2668/16asc.jpg

http://img209.imageshack.us/img209/7310/17aek.jpg

http://img829.imageshack.us/img829/9530/18ax.jpg


I hate to click on a link, but it is the best I can do.  ???


Mike

Logged

Offline Longshot

  • Sr. Member
  • ****
  • Posts: 324
Re: Jim Kibler
« Reply #1 on: November 01, 2010, 01:02:54 PM »
Yeah, I'd keep that one if I were you.
Outstanding!
Logged

Offline C Wallingford

  • Hero Member
  • *****
  • Posts: 863
  • Northern Kentucky
    • CW Knives
Re: Jim Kibler
« Reply #2 on: November 01, 2010, 02:16:44 PM »
Very, very nice. Jim's work is amazing. Clean crisp lines and an impeccable finish. I love it.
Logged

Flinter

  • Guest
Re: Jim Kibler
« Reply #3 on: November 01, 2010, 02:59:41 PM »
The photos of Jim's rifle does not do the flintlock justice. My daughter said, "Dad, you mean I'm gonna get this custom flintlock one of these days?"
Not only is this a keeper, but a shooter as well Longshot.

Charles, this is the rifle that goes with the stag handle knife I am going to send you a check for today. Yea, I love it too.

Mike
Logged

Offline Tom Currie

  • Hero Member
  • *****
  • Posts: 1294
Re: Jim Kibler
« Reply #4 on: November 01, 2010, 03:12:30 PM »
Maybe the fanciest looking wood box cover I have seen. I think designing something thats interpretive yet not a copy is most impressive, as is everything else I see in these photos. Can't wait to see more.
Logged

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: Jim Kibler
« Reply #5 on: November 01, 2010, 03:37:29 PM »
Holy smokes.   I don't think anyone even commented on the wood.   It doesn't take super curly wood to make a great gun...................Don
Logged

Offline Fullstock longrifle

  • Hero Member
  • *****
  • Posts: 1070
Re: Jim Kibler
« Reply #6 on: November 01, 2010, 04:01:08 PM »
Really nice rifle, he nailed it!

Frank
Logged

nthe10ring

  • Guest
Re: Jim Kibler
« Reply #7 on: November 01, 2010, 04:40:27 PM »
It just doesn't get any better than that. Crisp , clean, gorgeous work. One of the best makers out there today.

Jerry Fisher
Logged

Offline Ben I. Voss

  • Sr. Member
  • ****
  • Posts: 353
Re: Jim Kibler
« Reply #8 on: November 01, 2010, 05:14:05 PM »
My, that is such super clean, crisp work! Amazing. Good job on the photos, too.
Logged

Offline Robby

  • Hero Member
  • *****
  • Posts: 2655
  • NYSSR ―
Re: Jim Kibler
« Reply #9 on: November 01, 2010, 06:13:50 PM »
Just beautiful, everything!
Robby
Logged
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Jim Kibler
« Reply #10 on: November 01, 2010, 06:19:13 PM »
Absolutely no way to make it better. Truly the best I think I've ever seen. You've got a family heirloom there!
Logged
"Anything worth doing is worth doing slowly." Mae West

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4473
    • Personal Website
Re: Jim Kibler
« Reply #11 on: November 01, 2010, 11:09:42 PM »
Thank you all for the nice words.  Mike, thanks for posting pictures here and in the shooting section.  I've enjoyed them!  If you guys have any questions just ask.

-Jim
Logged

Offline Gary Tucker

  • Full Member
  • ***
  • Posts: 236
Re: Jim Kibler
« Reply #12 on: November 01, 2010, 11:22:12 PM »
Wow!  What a super gun.  Everything about it is fantastic.  The color is  just right. 
Logged
Gary Tucker

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Jim Kibler
« Reply #13 on: November 01, 2010, 11:32:36 PM »
So, where are you from Jim?  Certainly not of this world!  You blow my mind!!
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Larry Pletcher

  • Hero Member
  • *****
  • Posts: 1748
    • Black Powder Mag
Re: Jim Kibler
« Reply #14 on: November 02, 2010, 12:31:39 AM »
Jim,
Great work! I suspect we all see something different when we look at this gun.  For me it's the crispness of the carving.   Some day I hope to own such a fine piece.


Best Regards,
Pletch
Logged
Regards,
Pletch
blackpowdermag@gmail.com

He is no fool who gives up what he cannot keep to gain what can never be taken away.

Kayla Mueller - I didn't come here of my own accord, and I can't leave that way.  Whoever brought me here, will have to take me home.

Offline Tom Currie

  • Hero Member
  • *****
  • Posts: 1294
Re: Jim Kibler
« Reply #15 on: November 02, 2010, 02:00:15 AM »
Jim, Since you findly offered I have a few questions

1. Your incised carving appears quite deep. What tool(s) do you use to cut that deep.

2. What did you use to make small incised circles ?

3. Tell us about your finish. It ceratinly appears " in the wood" and not on it.

4. Is your buttplate made from sheet ? Or is that a casting ?

Thanks
Logged

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Jim Kibler
« Reply #16 on: November 02, 2010, 03:24:49 AM »
WOW!  Jim always does superb work, but this rifle is truely a thing of beauty.  Just awesome...

                       Ed
Logged
Ed Wenger

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4473
    • Personal Website
Re: Jim Kibler
« Reply #17 on: November 02, 2010, 03:32:28 AM »
Tom,

The incised carving is cut by first stabbing in the design with chisels and gouges and then trimming one or both of the sides with a knife or skew chisel used as a knife.  I really like this technique in that you have total freedom in the nature of the incised cut.  You can make it quite deep while still pretty narrow.  You can also vary the width of the cut to create a more interesting line.  I like bold strong carving and this goes for incised work as well.  This is a technique that Wallace advocates and I learned it from him.

The little circles are mostly formed with a couple of nail sets ground down and sharpened.  It sort of just compresses the wood.  You see this on some Moravian work.  It doesn't always work perfectly, but creates a decent overall effect.  In a few places I cut the circles by spinning a gouge and then removing wood outside of this cut to create an incised line.

The stock was stained with iron nitrate.  The finish is Kettenberg's oil.  Variations in color were primarily created using a commercial glaze and and by mixing color in the finish.  Some of the finish and color is in the wood, some is on the wood.


The butplate is a casting that I made the master and molds for so it could be wax cast. 

Jim
Logged

Offline Bill of the 45th

  • Hero Member
  • *****
  • Posts: 1436
  • Gaylord, Michigan
Re: Jim Kibler
« Reply #18 on: November 02, 2010, 03:40:45 AM »
This gun is breathtaking, and the photography as well, these are some of the best lighted pic's in a while.  Artistry both rifle, and picture.

Bill

Logged
Bill Knapp
Over the Hill, What Hill, and when did I go over it?

billd

  • Guest
Re: Jim Kibler
« Reply #19 on: November 02, 2010, 05:31:21 AM »
Jim,   Beautiful work.   

I have a question if you don't mind.  What is the different texture under the patch box lid?  It looks like a leather insert.

Thanks,
Bill
Logged

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4473
    • Personal Website
Re: Jim Kibler
« Reply #20 on: November 02, 2010, 06:24:19 AM »
Bill,

There's just wood under the box lid.  It's probably not quite as smooth as the the exposed areas.  Likely didn't get the rubbing and attention that the exposed surfaces did.

Jim
Logged

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
Re: Jim Kibler
« Reply #21 on: November 02, 2010, 07:26:43 AM »
Every line, every turn of the carving just adds grace to the rifle.
Logged

Offline smshea

  • Hero Member
  • *****
  • Posts: 592
    • www.scottshearifles.com
Re: Jim Kibler
« Reply #22 on: November 02, 2010, 03:35:46 PM »
That's a true jaw dropper! Very beautiful Jim.
Logged

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1286
  • Great X Grandpa
Re: Jim Kibler
« Reply #23 on: November 02, 2010, 03:44:18 PM »
The carving on this rifle is, for me, inspiring and depressing at the same time. How can you not be inspired by that bold, flowing hand? But, its depressing because I'll never get there!
Logged
Robert Wolfe
Northern Indiana

Leatherbelly

  • Guest
Re: Jim Kibler
« Reply #24 on: November 02, 2010, 04:26:56 PM »
Quote from: Don Getz on November 01, 2010, 03:37:29 PM
Holy smokes.   I don't think anyone even commented on the wood.   It doesn't take super curly wood to make a great gun...................Don
I agree with Don wholeheartedly. What a gorgeous rifle! The architecture and carving sure carry this one! Great work,Jim.
Logged
Pages: [1] 2   Go Up
« previous next »