Author Topic: Early Virginia Step Wrist  (Read 3351 times)

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Early Virginia Step Wrist
« on: December 31, 2010, 05:00:41 PM »
Hello Ya'll
Has anyone built or seen a rifle from Tiger Hunts Early Virginia Step Wrist stock.  I am just curious what it looks like and would love to see an image. 

Take care

Coryjoe

Offline G-Man

  • Member 3
  • Hero Member
  • *
  • Posts: 2217
Re: Early Virginia Step Wrist
« Reply #1 on: January 01, 2011, 04:46:08 PM »
Cory - I may be mistaken but I had a conversation with them at one time and I believe they said it is loosely based on the Klette rifle but maybe with some Hershel influence(?)

Tip Curtis sells a similar pattern I believe.

The "step" on many of these was very subtle - lots of guys go overboard here and make them too drastic.  There is actually enough wood on a number of the basic early type stock patterns to add a step.   You just want to make sure the comb is not cut too far back.  The wrist areas tend to be fairly compact looking on these type guns and when you look at these guns from the side, they generally appear like the wrist is actually starting to flare out in height as you move toward the comb, if that makes sense, due to the visual effect of the increasing stock height.

Good luck

Guy

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Re: Early Virginia Step Wrist
« Reply #2 on: January 01, 2011, 08:58:48 PM »
Hey Guy,


That makes perfect sence.  The rifle you and I spoke about before as being and early step wrist was on the Contemporary Makers Blog so my interest peaked again.  It was te one from Bethabra North Carolina.  David Keck has a stock pattern listed now that looks an awful lot like it patterned from a Peter Neirhart rifle. 

Coryjoe

Offline AndyThomas

  • Sr. Member
  • ****
  • Posts: 344
Re: Early Virginia Step Wrist
« Reply #3 on: January 03, 2011, 02:23:43 AM »
Coryjoe,

I have one of these precarve stocks, which hasn't been made into a gun yet. If you live anywhere near the Cumberland Gap, drop by and I'll show it to you.

Andy
formerly the "barefoot gunsmith of Martin's Station" (now retired!)

www.historicmartinsstation.com