« previous next »
Pages: [1]   Go Down

Author Topic: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)  (Read 8176 times)

J1776

  • Guest
Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« on: April 21, 2011, 08:01:18 PM »
Just started up on a set for my rifle I'm building.  Making all handles from deer antler and choosing to hand work them without any lathe use,... will probably make another set on the lathe,... just play back and forth.

(Don't mind the black ink,...layout via marker,...will come off with a little acetone)


Working up another powder horn as well,...

« Last Edit: April 21, 2011, 08:02:14 PM by JShip1776 »
Logged

Ahtuwisae

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #1 on: April 21, 2011, 08:35:06 PM »
looks like a great start.  Looking forward to the finished product.
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #2 on: April 21, 2011, 09:58:20 PM »
If you are trying to do a Tansel type fish mouth on the powder horn you posted a picture of, I would suggest that you elongate it just a bit more.  Carvings and such that look right when drawn on the surface tend to shorten up to the eye when you add the third dimension of depth.
DMR
Logged

J1776

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #3 on: April 21, 2011, 10:28:03 PM »
Quote from: David Rase on April 21, 2011, 09:58:20 PM
If you are trying to do a Tansel type fish mouth on the powder horn you posted a picture of, I would suggest that you elongate it just a bit more.  Carvings and such that look right when drawn on the surface tend to shorten up to the eye when you add the third dimension of depth.
DMR

I was thinking it didn't quite look long enough...that confirms it....thanks.

Logged

J1776

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #4 on: April 21, 2011, 10:28:25 PM »
Quote from: Ahtuwisae on April 21, 2011, 08:35:06 PM
looks like a great start.  Looking forward to the finished product.

why thank you....its all as time allows,...
Logged

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 797
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #5 on: April 22, 2011, 05:25:10 AM »
    Keep the  pic's coming. Looks good so far.    AL
Logged
Alan K. Merrill

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #6 on: April 22, 2011, 05:56:54 AM »
If I might make a suggestion, try to keep the throat of the horn slender so it looks good with the whale mouth. You might make the onion at the tip a little smaller. keep it slender. Great work so far. Keep it up.

Steve
Logged
Steve Skillman

J1776

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #7 on: April 22, 2011, 07:54:16 PM »
thank you steve,...I'll do that.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #8 on: April 22, 2011, 08:14:16 PM »
 That looks like a small broad horn, be careful with your proportions.

 Tim C.
Logged

J1776

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #9 on: April 23, 2011, 12:52:06 AM »
Quote from: Tim Crosby on April 22, 2011, 08:14:16 PM
That looks like a small broad horn, be careful with your proportions.

 Tim C.


Its approx 14" long end to end.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #10 on: April 23, 2011, 05:13:28 PM »
Quote from: JShip1776 on April 23, 2011, 12:52:06 AM
Quote from: Tim Crosby on April 22, 2011, 08:14:16 PM
That looks like a small broad horn, be careful with your proportions.

 Tim C.


Its approx 14" long end to end.

 In that case, even more so. These are about 14" over all.





 Tim C.
« Last Edit: April 23, 2011, 08:29:08 PM by Tim Crosby »
Logged

J1776

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #11 on: April 24, 2011, 03:30:43 AM »
Great looking horn Tim,...Nice golden orange tone to it.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #12 on: April 26, 2011, 08:49:13 PM »
Quote from: JShip1776 on April 24, 2011, 03:30:43 AM
Great looking horn Tim,...Nice golden orange tone to it.

 Thanks.

 Tim C.

PS: These are two different horns.
Logged

J1776

  • Guest
Re: Stared on an antler Vent pick, brush and powder measure set...(and powder horn)
« Reply #13 on: May 04, 2011, 04:24:48 AM »
Quote from: Tim Crosby on April 26, 2011, 08:49:13 PM
Quote from: JShip1776 on April 24, 2011, 03:30:43 AM
Great looking horn Tim,...Nice golden orange tone to it.


PS: These are two different horns.

Ahh indeed they are,.. I didn't catch the end plug differences, etc.
Again, very nice!
Logged
Pages: [1]   Go Up
« previous next »