Author Topic: 19th century Ohio screw-tip horn  (Read 3422 times)

Offline Carl Dumke

  • Full Member
  • ***
  • Posts: 123
19th century Ohio screw-tip horn
« on: May 11, 2011, 05:11:14 AM »
Hey all!
Picked up a screw tip horn doing some antiquing in south central Ohio.  The national road is the basic route that follows old U.S. 40 (now approximately I-70) from PA to Saint Louis.  This was the first major pathway to the west.  Many people who moved west followed this path.  It has some characteristics of a Franklin and Lancaster horns.  The butt section is translucent and you can see some powder residue around the plug.  Found another horn--didn't buy that one--but, on turning it over to inspect it, a significant amount of powder flowed freely onto the antique shop floor!  I told the shop owner that it would be a bad idea to smoke near the cabinet!  Would like to know if anyone has any other insight.  Thanks!   






Carl

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19540
Re: 19th century Ohio screw-tip horn
« Reply #1 on: May 11, 2011, 06:08:06 AM »
Real nice find!
Andover, Vermont

Offline Rick Sheets

  • Hero Member
  • *****
  • Posts: 729
  • HCH Master Horner and Web Guy
    • Proud Journeyman Horner with the Honourable Company of Horners
Re: 19th century Ohio screw-tip horn
« Reply #2 on: May 11, 2011, 04:57:07 PM »
I like it! Simple.

1) Carl, is the screw tip internally or externally threaded?

(For those who do not know what that means here is a link to a very short article on threads...
http://www.hornguild.org/articles-from-the-archives/the-screw-tip-powder-horn-from-feb-2007-edition-of-the-horn-book/)

2) Do I see a horn stopper? Are the sides of the stopper tapered or straight?

Great find and thanks for the clear pictures.

Rick
Proud Master Horner with the Honourable Company of Horners
     http://www.hornguild.org
My personal website:
     http://patriothorns.com
Like me on facebook:
     http://www.facebook.com/patriothorns

Offline Carl Dumke

  • Full Member
  • ***
  • Posts: 123
Re: 19th century Ohio screw-tip horn
« Reply #3 on: May 11, 2011, 07:21:19 PM »
I like it! Simple.

1) Carl, is the screw tip internally or externally threaded?

(For those who do not know what that means here is a link to a very short article on threads...
http://www.hornguild.org/articles-from-the-archives/the-screw-tip-powder-horn-from-feb-2007-edition-of-the-horn-book/)

2) Do I see a horn stopper? Are the sides of the stopper tapered or straight?

Great find and thanks for the clear pictures.

Rick,
The horn is an external screw tip and there isn't a stopper.  What you see is the whole tip.  Thanks!


Rick
Rick,
The horn is an external screw tip and there isn't a stopper.  What you see is the whole tip.  Thanks!


« Last Edit: May 11, 2011, 07:22:48 PM by Carl Dumke »
Carl