« previous next »
Pages: [1]   Go Down

Author Topic: Rising Sun Horn  (Read 7968 times)

Ahtuwisae

  • Guest
Rising Sun Horn
« on: May 13, 2011, 01:47:28 AM »
This began as an experiment to focus on architecture.  I did not follow any particular style.  It is a small day horn 9 1/2" on the inside curve and 11" on the outside curve.  No twist.  the base is 7" in diameter.  The base and spout plug are maple.  the throat is dyed with dk brown rit.  the body aged with sunshine yellow, and a pinch of brown.  the phrase on the body says: "Whether in Peece or in WAR, i will carry my contents faithfully.  For in either tyme it must be dry, To spark the hunt or set us free."  the rest is just whatever came to mind as i was dooling on the horn.

No glue, beeswax and maple pins, nice and airtight.  Staples are forges from 1/8 wire and bent over on the inside.

Enjoy!















Logged

Offline Beaverman

  • Hero Member
  • *****
  • Posts: 569
Re: Rising Sun Horn
« Reply #1 on: May 13, 2011, 03:03:42 AM »
Nice job John!
Logged

KHickam

  • Guest
Re: Rising Sun Horn
« Reply #2 on: May 13, 2011, 03:50:20 AM »
very nice
Logged

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3004
Re: Rising Sun Horn
« Reply #3 on: May 13, 2011, 04:18:58 AM »
Very nice horn. Did you mean 7" circumference?
Mark
Logged
Mark

Ahtuwisae

  • Guest
Re: Rising Sun Horn
« Reply #4 on: May 13, 2011, 04:33:27 AM »
Quote from: smokinbuck on May 13, 2011, 04:18:58 AM
Very nice horn. Did you mean 7" circumference?
Mark

yes circumference.
Logged

Offline draken

  • Sr. Member
  • ****
  • Posts: 404
Re: Rising Sun Horn
« Reply #5 on: May 13, 2011, 05:42:28 AM »
I really like that horn, and a very interesting scrim design as well.  Nicely done, John, nicely done.
Logged
Dick 

Times have sure changed. Gun control used to mean keeping the muzzle pointed in a safe direction

Never write a check with your mouth that your butt can't cash!

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7906
Re: Rising Sun Horn
« Reply #6 on: May 13, 2011, 05:46:14 AM »
Again very nice just like the cup. Great color, workmanship and great inscription.   Smylee
Logged

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Rising Sun Horn
« Reply #7 on: May 13, 2011, 06:53:09 AM »
Got to be among the nicest horns I've ever seen. There's one to carry with pride.
Logged
"Anything worth doing is worth doing slowly." Mae West

Ahtuwisae

  • Guest
Re: Rising Sun Horn
« Reply #8 on: May 13, 2011, 04:30:30 PM »
Thank you all for the kind remarks.
Logged

Offline Rick Sheets

  • Hero Member
  • *****
  • Posts: 729
  • HCH Master Horner and Web Guy
    • Proud Journeyman Horner with the Honourable Company of Horners
Re: Rising Sun Horn
« Reply #9 on: May 15, 2011, 06:15:29 PM »
Wild Willie has some competition! Super layout and execution.

Question: Did you cut your lines with a scribing tool? Clean and clear cuts.

Love that horn.
Logged
Proud Master Horner with the Honourable Company of Horners
     http://www.hornguild.org
My personal website:
     http://patriothorns.com
Like me on facebook:
     http://www.facebook.com/patriothorns

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Rising Sun Horn
« Reply #10 on: May 15, 2011, 10:55:21 PM »
I agree with Rick, John. Your scrim is getting very nice. This horn may have just been a practice horn, but aren't they all?
Good job.
Steve
Logged
Steve Skillman

Ahtuwisae

  • Guest
Re: Rising Sun Horn
« Reply #11 on: May 16, 2011, 02:27:44 PM »
Quote from: Rick Sheets on May 15, 2011, 06:15:29 PM
Wild Willie has some competition! Super layout and execution.

Question: Did you cut your lines with a scribing tool? Clean and clear cuts.

Love that horn.

I have a long road t ohaul to get to Willie's quality but thank you Rick.  I used a coulter precision tip engraver and an exacto...for the little circles, a small drafting scribe compass.

John
Logged

Ahtuwisae

  • Guest
Re: Rising Sun Horn
« Reply #12 on: May 16, 2011, 02:28:46 PM »
Quote from: skillman on May 15, 2011, 10:55:21 PM
I agree with Rick, John. Your scrim is getting very nice. This horn may have just been a practice horn, but aren't they all?
Good job.
Steve

You Betcha!  thanks Steve.  You are one of the reasons I keep "pushn' the bar".
Logged

Offline Hawken62_flint

  • Hero Member
  • *****
  • Posts: 504
  • Nothing like it, 'cept more of it !
Re: Rising Sun Horn
« Reply #13 on: May 17, 2011, 06:15:13 PM »
Great horn--really well done scratchin'---why did everyone else but me get the artistic ability?
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Rising Sun Horn
« Reply #14 on: May 18, 2011, 03:48:22 PM »
    Nice work, just the layout of those rosettes, for lack of a better word, is a job in itself.

     Tim C.
Logged

Ahtuwisae

  • Guest
Re: Rising Sun Horn
« Reply #15 on: May 18, 2011, 05:27:41 PM »
Quote from: Tim Crosby on May 18, 2011, 03:48:22 PM
   Nice work, just the layout of those rosettes, for lack of a better word, is a job in itself.

     Tim C.

Painful...might be a good word to describe that.  It is hard enough on a flat square and then you add curvature and angles...Oh My.  Well worth it though.
« Last Edit: May 18, 2011, 05:28:38 PM by Ahtuwisae »
Logged
Pages: [1]   Go Up
« previous next »