Author Topic: Fowling piece........  (Read 17145 times)

Offline Long Ears

  • Hero Member
  • *****
  • Posts: 722
Re: Fowling piece........
« Reply #25 on: October 11, 2011, 08:22:58 PM »
Macon, sounds to me like Dan likes driving a Bentley to work everyday! I think you can find a nice used or one in the white in the $1000.00 price range give or take a couple of hundred. Call Tip Curtis or TVM and explain what you want. In my opinion get a Chambers or Davis lock. Just get one and get to shooting it and burn some powder. The prices will never go down and if you are like the rest of us you will get 5 or 20 more and may end up with that Manton breech. That old Chevy will be just as reliable as his Bentley and cost a lot less to maintain. Just my two cents, Bob

Macon Due

  • Guest
Re: Fowling piece........
« Reply #26 on: October 12, 2011, 01:39:06 AM »
Bob
You could be right, Now I'd drive a Bentley myself if I could afford it but.....I 'have' to drive a Chevy P.U. instead...so I reckon I will keep looking for now.
Thanks......Macon

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Fowling piece........
« Reply #27 on: October 12, 2011, 02:39:36 AM »
What's wrong with a Chevy pickup? My 55.1 3100 is just right for me!  ;D
"Anything worth doing is worth doing slowly." Mae West

Macon Due

  • Guest
Re: Fowling piece........
« Reply #28 on: October 12, 2011, 03:46:10 AM »
Kermit
Not a thing wrong with Chevy pickups...I love em but.......I'd rather have a 1933 Bentley to drive!
Macon

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Fowling piece........
« Reply #29 on: October 12, 2011, 07:46:29 AM »
There was a reason why the English did all the things they did with flintlock shotguns. Some was window dressing but some of the improvements really were.
As I pointed out the Nock breech is more CONSISTENT, it apparently gives better velocity. Variations in lock time or how the powder burns can vary the lead necessary when shooting flying birds. I watched a slow mo of a typical original  English fowler of maybe 1770-1780 vs a late Manton shotgun. There was a significant difference in the time from pan firing to the shot clearing the muzzle. So there was a reason for all the stuff the English were doing. Like "frictionless" locks with stiff springs and fancy breeches. But GOOD flintlocks and GOOD FL breeches are custom work either to tune in the case of most locks or to make from bar stock.

So the English came up with very fast locks with relatively small cocks and frizzens, breeches that gave better velocity and more consistent ignition and better fitting hooked breeches. The workmanship was much better since the clientele was more affluent but they were actually WING shooters. I am not sure the average American fowler owner was...

So people have to decide if they are shooting at flying targets or if the gun is a prop. Often they are seen as props rather than "real guns" by ML owners.
But if someone were to buy or build a fowler with a lock that throws the sparks in front of the pan they will have slower ignition and greater variations in the ignition based on where the sparks fall. I doubt that the made from as purchased parts gun that sells for 1000 bucks has any tuning done to the lock
Most locks you buy will likely throw sparks ahead of the pan. Tuning the lock to correct this takes knowledge and experience. Sometimes springs need to be reworked or new one made to give the proper tension. Why would the gunsmith, using years of accumulated knowledge, tools and other expendables, tune the lock for less by the hour than some high school drop out gets paid for pushing hamburgers across the counter at Burger King?
But if someone wants to get an actual living wage for his work people get all insulted or at least aghast at what actual gun work costs.
They might be better served putting a shotgun barrel in a TC Hawken from the pawn shop. It will be slow and inconsistent and hard to hit things with but the price will make them happy.
A cheap gun is a cheap gun. It matters not at all which end it loads from.

So if anyone thinks the breech prices are too high fire up your drill press and make a Nock breech from a piece of 1 1/4 or larger round stock or square stock that matches the barrel size, cut the threads, carefully fit it to the standing breech (also made from barstock). Keep track of your time then sell it for 100 bucks (double what the typical cast breech costs) and see what your hourly wage is.
Make "ghosted" late English tumbler from bar stock because the casting you waited a year for was only good as a pattern.
Or have a look in Brownell's latest catalog for the labor only "Shop Price Survey". This will show some real world gunsmithing charges. Dovetails cut at $50 to $95 EACH. So 4 underlugs and 2 sights thats 6 dovetails 50 bucks a pop. Thats $300 bucks to cut dovetails and this is the LOW END. AND this is surely for a standard 3/8" (a 3/8" requires 2 passes and a tool change). Not the odd sizes used in ML arms in many cases that require several passes and calculations to get to the proper size or close enough to file to fit. Drill and tap holes $20 to $45 per hole. Shop rate per man hour $40-80. Man and machine hour $50-95.
So if I spend all day making a breech and the vent liner and the plug for the off side its going to run about what I said it would in the post that has people talking about me driving a Bentley. Then there is the color case hardening.

BTW when I went to the bank today I drove a 66 IH pickup with a worn out drivers seat, cracked winshield and pealing paint.

Dan

He who dares not offend cannot be honest. Thomas Paine

Offline Feltwad

  • Hero Member
  • *****
  • Posts: 892
Re: Fowling piece........
« Reply #30 on: October 12, 2011, 08:41:06 AM »
I must agree with Dan on English Gun Making ,I will go further to say it was then the best in the world which still applies to the present day.
Feltwad

Offline Majorjoel

  • Hero Member
  • *****
  • Posts: 3138
Re: Fowling piece........
« Reply #31 on: October 12, 2011, 12:00:02 PM »
For building a SxS flintlock shotgun, Ed Rayle was making and selling barrel sets with recessed breech's and fitted tang. I bought a 20 guage set about 5 years ago for 1000.00 bucks. Don't know if he is still doing these, but his quality is top notch. On a good note for the budget minded active wing shooter, the going prices for original SxS percussion shotguns hasn't changed much since the 1960's. You can easily find a good (safe) shooter in the 300-500 dollar price range. I just sold a dandy 12 guage by W&C Scott & Son for 400. Silver mounted and nicely engraved. Original flintlock doubles in good shape are now priced in the Rolls Royce catagory.
Joel Hall

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3163
  • James Rogers
    • Fowling Piece
Re: Fowling piece........
« Reply #32 on: October 12, 2011, 12:17:59 PM »
I also agree with Dan on the consistency of performance issue. If performance is the only factor though, I will use my DT-10. Less fiddly stuff to worry about.  Those late English features are very limiting in style, time frame and locale from a historical standpoint as he points out. I can still do well enough for myself with a tuned lock, good flint and a counter-bored hole that my guns are not props at all.

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Fowling piece........
« Reply #33 on: October 12, 2011, 02:35:54 PM »
I also agree with Dan on the consistency of performance issue. If performance is the only factor though, I will use my DT-10. Less fiddly stuff to worry about.  Those late English features are very limiting in style, time frame and locale from a historical standpoint as he points out. I can still do well enough for myself with a tuned lock, good flint and a counter-bored hole that my guns are not props at all.


This goes back to: What am I using the gun for?
I built the 16 bore rifle because  I wanted a good flintlock for hunting, perhaps dangerous game and had the first barrel I had on it been more accurate than a musket I likely would have killed a Grizzly with it. But that window is pretty much closed now. Since F&I re-enacting is not a big issue out here I can take it to any event I want and its 1800-1820 time frame is just fine.
The Nock patent dates to the 1780s. The critical features of the better English locks dates to perhaps the late American Revolution period if not before. The "frictionless" features.
AND from reading Nigel George, who may or may not be right but knew more than I do, the fowling pieces were the technology leaders since thats where most of the interest was with the English "Landed Gentry" etc. So one is more likely to see the latest in technology on a shotgun than a rifle.
George states that the flintlock hung on longer with the rifle than it did with the shotgun in England because the percussion system was a revolution in wing shooting. I believe that the flintlock system was more ACCURATE early on in rifles until the caps became more refined at least.

I guess I run afoul of things here since I look at what the thing will do and what I want it to do before most other considerations. The fact that I really have no use for a shotgun only further confuses the issue I suppose. I don't hunt waterfowl at all or upland birds (though I probably should) at all anymore and I will not pretend I am some smoothbore toting farmer from 1777, its not who I am.  I can't see shooting an ounce of lead at a little bitty bird.
I posted the comments on the Nock Breech and the late English locks because if I were building a flint shotgun for myself to actually use as a shotgun this is what I would have. Its the best system for the purpose prior to percussion ignition.
In rifles I can shoot a plain breech, large or small Siler just as well but from the purely utility standpoint the best quality late English flintlock is better. Its more reliable and has few wear points. But given that the designs are 100 years apart it SHOULD be a better lock.
The L&R 1700 (Manton/Bailes) is a 1780s English design. It is head and shoulders over a small Siler for a pistol since it hardly jars the gun at all. But as purchased is has "issues".  So for a SHOOTER its a better lock once tuned. It would be a better lock for a Kentucky rifle as well. For someone who won't allow himself a date later than 1777 because all his clothing and gear is from that date or before its not much good.
Yes a "prop" can be usable. But for someone who wants something but can't have it because his F&I re-enactor buddies whould drum him from camp then the firearm gets into compromise.

Yes I can shoot percussion guns better than flint. But I don't like percussions all that much.
Dan
He who dares not offend cannot be honest. Thomas Paine

Offline Dan'l 1946

  • Hero Member
  • *****
  • Posts: 628
Re: Fowling piece........
« Reply #34 on: October 12, 2011, 05:48:51 PM »
Macon, sounds to me like Dan likes driving a Bentley to work everyday! 
   Bob, I don't know which of us Dans you are referring to, but I drive a 9 year old Ford. That way I can afford a higher quality flint gun. Gotta have priorities you know...

Offline Long Ears

  • Hero Member
  • *****
  • Posts: 722
Re: Fowling piece........
« Reply #35 on: October 12, 2011, 07:30:22 PM »
Dan'l, I knew I was kicking a hornets nest with that statement, but I just learned more about Flintlock shotguns that I could ever have read in a dozen books. Mr. Phariss is an amazing source of knowledge. I personally knew Elmer Kieth when he was alive and they are a lot alike. Just get them started and listen real close. I really do understand the cost of quality hand made firearms. I shoot a rather high end German shotgun in competition. I get why it is tough to make a living and get paid a decent hourly wage as a Gunsmith. I actually considered that path many years ago but was advised against it so I just try to do my own work. Thanks Mr. Phariss, good stuff. Bob

Offline Dan'l 1946

  • Hero Member
  • *****
  • Posts: 628
Re: Fowling piece........
« Reply #36 on: October 12, 2011, 10:31:28 PM »
Not really a hornet's nest. It is a good thing that there are lower cost guns of decent quality available especially for younger folks just getting involved in muzzleloading. Even a ysed CVA rifle is valuable if it gets a new person involved in blackpowder shooting. Lots of guys I know got started with these guns and now have a lifetime of involvement.
                                   Dan