« previous next »
Pages: [1]   Go Down

Author Topic: Using Spray Paint with finish  (Read 6309 times)

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Using Spray Paint with finish
« on: November 28, 2011, 05:24:24 AM »
Hello All,

I am considerng using black spray paint when finishing my project.  I have studied on it some, and do like the effect it gives.  What I have read is that it is used after a couple of coats of stain.  Is this correct?  Also, are there any other precautions I should keep in mind as I venture on?

Coryjoe
Logged

Offline Nate McKenzie

  • Hero Member
  • *****
  • Posts: 1019
  • Luzerne Co. PA
    • Nathan McKenzie Gunmaker
Re: Using Spray Paint with finish
« Reply #1 on: November 28, 2011, 05:44:44 AM »
I use flat black after the stain and the first coat or two of finish. Steel wool the high spots and wear areas and then more finish.  Another good effect is spray the paint on a cloth and rub it in leaving it build up in the crevices.
Logged

Offline FALout

  • Hero Member
  • *****
  • Posts: 875
Re: Using Spray Paint with finish
« Reply #2 on: November 28, 2011, 06:22:55 AM »
If you spray it on BEFORE a coat or two of finish, you likely will have a panic attack.   You will have a hard time cutting it back to create worn areas.   You also are gonna want something that sparys fine mist, not globs of paint. 
Logged
Bob

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Using Spray Paint with finish
« Reply #3 on: November 28, 2011, 07:11:34 AM »
An airbrush is what the fine fellers use.

You can also mix your own colors with an airbrush, burnt umbers mixed with a little lampblack, for example, to give a more brownish-dirty look.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

gunsports

  • Guest
Re: Using Spray Paint with finish
« Reply #4 on: November 28, 2011, 01:33:14 PM »
Air brush with the stain you are using on your stock, or even a darker stain, adds very interesting accents to an otherwise plain stock; especially if you have lighter streaks in the wood.
Logged

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Re: Using Spray Paint with finish
« Reply #5 on: November 29, 2011, 06:31:54 AM »
Thanks everyone, thats the information I needed.

Coryjoe
Logged

Offline TPH

  • Hero Member
  • *****
  • Posts: 923
Re: Using Spray Paint with finish
« Reply #6 on: November 29, 2011, 11:37:45 PM »
Where's Mike Brooks?
Logged
T.P. Hern

Offline Keb

  • Hero Member
  • *****
  • Posts: 1193
  • south Ohio
Re: Using Spray Paint with finish
« Reply #7 on: November 30, 2011, 12:23:33 AM »
« Last Edit: November 30, 2011, 12:23:59 AM by Keb Mo »
Logged

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Re: Using Spray Paint with finish
« Reply #8 on: November 30, 2011, 02:48:35 AM »
I have the info from Mike Brooks' site, I just needed some clarity on when to use it.  I have also looked over Nate's website. 

Coryjoe
Logged

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9928
  • Kill a Commie for your Mommy
Re: Using Spray Paint with finish
« Reply #9 on: November 30, 2011, 06:05:24 AM »
Brownell's sells camo paint...
Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

Offline cmac

  • Hero Member
  • *****
  • Posts: 695
Re: Using Spray Paint with finish
« Reply #10 on: December 01, 2011, 02:22:38 AM »
H. House demonstrates this in one of his videos. He is lightly rubbing the paint off the high areas ans then uses steel wool to finish the process...... if I recall correctly this is after linseed oil but more oil can be added after as well
Logged

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: Using Spray Paint with finish
« Reply #11 on: December 01, 2011, 06:12:16 AM »
The late Dave Dodds used black paint on almost every gun he made, and they all looked good..............Don
Logged

Offline duca

  • Hero Member
  • *****
  • Posts: 578
Re: Using Spray Paint with finish
« Reply #12 on: December 02, 2011, 01:37:59 AM »
Would love to see this done. Anyone have any pic's of a Rifle this is being done to? ???
Logged
...and on the eighth day
God created the Longrifle...

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Re: Using Spray Paint with finish
« Reply #13 on: December 02, 2011, 03:55:08 AM »
duca, Google Mike Brooks Gunbuilding tutorial, it will pop up.

Coryjoe
Logged

Offline duca

  • Hero Member
  • *****
  • Posts: 578
Re: Using Spray Paint with finish
« Reply #14 on: December 02, 2011, 04:14:23 AM »
Awesome! Thanks...
Logged
...and on the eighth day
God created the Longrifle...
Pages: [1]   Go Up
« previous next »