« previous next »
Pages: [1]   Go Down

Author Topic: Hammer Clearance  (Read 2930 times)

Rkymtn57

  • Guest
Hammer Clearance
« on: February 05, 2012, 08:04:21 PM »
Could someone please show me what the stock carving for hammer clearance should look like?
I have searched but cannot locate an example. Thank you , D
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7496
  • Born in Kentucke, just 250 years late
Re: Hammer Clearance
« Reply #1 on: February 05, 2012, 08:58:41 PM »
Hi Dennis,

Welcome to ALR.  Here's a picture of that area on my rifle.  Hope this helps. 



-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline BillPac

  • Full Member
  • ***
  • Posts: 185
  • N. Ohio
Re: Hammer Clearance
« Reply #2 on: February 05, 2012, 11:47:19 PM »
Dennis:
Here is how I did it on my Dickert.


BillP
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Hammer Clearance
« Reply #3 on: February 05, 2012, 11:53:02 PM »
Another day, another way...

Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Rkymtn57

  • Guest
Re: Hammer Clearance
« Reply #4 on: February 06, 2012, 02:05:35 AM »
So I guess I have to keep removing a little wood until the pan seats flush against barrel ?
I guess there is no other way , I'm just worried about removing to much wood.
I guess I'm going at it ok.......D :(
Logged

omark

  • Guest
Re: Hammer Clearance
« Reply #5 on: February 06, 2012, 05:42:06 PM »
Quote from: Rkymtn57 on February 06, 2012, 02:05:35 AM
So I guess I have to keep removing a little wood until the pan seats flush against barrel ?
I guess there is no other way , I'm just worried about removing to much wood.
I guess I'm going at it ok.......D :(
yes, definitely seat the lock against the barrel. otherwise fowling or unburned powder will enter the lock internals. fowling in there just causes lock problems. unburned powder can actualy blow the lock off. not a good thing.    mark
Logged
Pages: [1]   Go Up
« previous next »