« previous next »
Pages: [1]   Go Down

Author Topic: Display Shelf For Horns  (Read 6782 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Display Shelf For Horns
« on: February 29, 2012, 05:45:09 PM »
  I was thinking of a way to get horns up off the table at shows (Read make room for more) this is what I came up with.

    Tim C.


Logged

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 909
Re: Display Shelf For Horns
« Reply #1 on: February 29, 2012, 05:56:13 PM »
Great idea Tim, for solving a table display problem. Outstanding display of horns. Your completed project looks great. Well done. AJ
« Last Edit: February 29, 2012, 08:19:11 PM by alyce-james »
Logged
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

Offline The Original Griz

  • Sr. Member
  • ****
  • Posts: 444
Re: Display Shelf For Horns
« Reply #2 on: February 29, 2012, 06:38:29 PM »
That is sweet... may I make a suggestion? Below the bottom shelf put a skirt on the front, that will give you a place to hide things, business cards, paper + pen, bags, food and then no one will be able to see your clamps that will hold it to the table.... now I may just have to go make one for myself....very nice idea, Tim.
« Last Edit: February 29, 2012, 06:39:27 PM by Griz »
Logged
“I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
Thomas Jefferson
www.timsannerpowderhorns.com

Offline PIKELAKE

  • Sr. Member
  • ****
  • Posts: 284
Re: Display Shelf For Horns
« Reply #3 on: February 29, 2012, 06:43:35 PM »
Tim, your shelf idea is a very good one. I really like your use of the tines to lock the shelf tenons. I,m sure a lot of folks will copying it. I know I will if that is OK? ....JZ
Logged
JOHN ZUREKI

Offline Shovelbuck

  • Sr. Member
  • ****
  • Posts: 424
Re: Display Shelf For Horns
« Reply #4 on: February 29, 2012, 07:35:56 PM »
Great idea!!!
Logged
I don't hunt the hard way, I hunt a simpler way.

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Display Shelf For Horns
« Reply #5 on: March 01, 2012, 04:14:45 AM »
That's a nice looking display Tim.  Great job!
Dave
Logged

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2087
Re: Display Shelf For Horns
« Reply #6 on: March 01, 2012, 05:07:00 AM »
Super job. I like it. Lots ;D
Logged
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

eseabee1

  • Guest
Re: Display Shelf For Horns
« Reply #7 on: March 01, 2012, 07:15:41 AM »
Like it Tim may have to steal your Idea   ;D
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Display Shelf For Horns
« Reply #8 on: March 01, 2012, 07:18:04 AM »
I like the wedged tenons with antler tips, nice touch and I assume this all comes apart for transporting easily?
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Display Shelf For Horns
« Reply #9 on: March 01, 2012, 03:57:14 PM »
 I thought it might come in handy for others too. Yes, the four tines come out and it comes apart. Griz, I like the skirt idea, I may add one. Since it only gets used at shows, I set it up so it will hang also.

 Thanks, Tim C.
Logged

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3163
  • James Rogers
    • Fowling Piece
Re: Display Shelf For Horns
« Reply #10 on: March 01, 2012, 04:52:44 PM »
Very nice Mr. C. but with the way you turn out horns I can just imagine you will need to add more floors to that "high rise"  ;D
Logged

Old Soldier

  • Guest
Re: Display Shelf For Horns
« Reply #11 on: March 01, 2012, 09:04:27 PM »
And I thought I had it bad!!!!!
Logged

smorrison

  • Guest
Re: Display Shelf For Horns
« Reply #12 on: March 02, 2012, 08:26:58 AM »
Great idea, Tim!

Scott
Logged

Offline bigsmoke

  • Sr. Member
  • ****
  • Posts: 437
Re: Display Shelf For Horns
« Reply #13 on: March 03, 2012, 09:40:18 PM »
That's a great idea, Tim, and well done (of course) as always.
I will guess it is what. 6' long and 4' high?  The only problem I see is talking to customers from in back of the table.  On a 6' table, that fills the entire thing.  On an 8' table, that gives you a 2' space to conduct business from.  Kind of awkward.
At least, that is what I have found from building tall table displays in the past.
John
Logged

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3163
  • James Rogers
    • Fowling Piece
Re: Display Shelf For Horns
« Reply #14 on: March 03, 2012, 11:30:21 PM »
Quote from: bigsmoke on March 03, 2012, 09:40:18 PM
That's a great idea, Tim, and well done (of course) as always.
I will guess it is what. 6' long and 4' high?  The only problem I see is talking to customers from in back of the table.  On a 6' table, that fills the entire thing.  On an 8' table, that gives you a 2' space to conduct business from.  Kind of awkward.
At least, that is what I have found from building tall table displays in the past.
John

These days many professionals in various trades have adopted a more personal and active approach in dealing with the customer in front of the display table. Jeff Bibb is a good example of this method in our world. This display is great for that.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Display Shelf For Horns
« Reply #15 on: March 04, 2012, 12:09:44 AM »
  It is about 45 X 38". It's 45 X 7" foot print takes up a lot less space than the 20 or so horns it will hold, plus a couple hanging from the sides.
 Jeff is a good example of being up front.

  Tim C.
Logged
Pages: [1]   Go Up
« previous next »