Author Topic: New shop taking shape (Read 7184 times)

Dr. Tim-Boone · « **on:** March 19, 2012, 12:34:57 AM »

Look fast ................this is the last time it will be neat!!! Just put the final coat of WOCA oil on the wide plank Southern Pine floor. Some hvac vent changes and painting the walls as well as adding base shoe this week and by next week can start moving things in ..I hope....... I like the WOCA oil..... may have to try iton a stock...its all vegetable - mostly linseed...

P.W.Berkuta · « **Reply #1 on:** March 19, 2012, 12:49:58 AM »

It sure looks like you will have enough room to "play" in -- Good Luck!

dannybb55 · « **Reply #2 on:** March 19, 2012, 03:05:17 AM »

I need to post a shot of my new shop too. It looks Tuyet vo'i. Doc.

Don Getz · « **Reply #3 on:** March 19, 2012, 03:16:03 AM »

Tim.....beautiful, nothing like having a nice place to work in. You realize, of course, that the quality of the guns that come
out of this shop will have to equal it's surroundings............Don

Bill-52 · « **Reply #4 on:** March 19, 2012, 03:23:22 AM »

That looks geat, Tim. I especially like the wide plank Southern Pine. Have fun!

Bill

smylee grouch · « **Reply #5 on:** March 19, 2012, 03:28:05 AM »

Looks like you have alot of light on one end and the room looks well lit. Do you have more windows or the combination of electric and light colored walls? Smylee

smart dog · « **Reply #6 on:** March 19, 2012, 04:09:33 AM »

Hi Tim,
Looks great. Where is it in your house? It looks like an attic.

dave

mjm46@bellsouth.net · « **Reply #7 on:** March 19, 2012, 01:50:10 PM »

Wow! Nice little shop. Be sure to post some pictures after you fill it up.

My "SHOP" is more of a bench a desk and a workmate table. HA HA

Dr. Tim-Boone · « **Reply #8 on:** March 19, 2012, 03:57:47 PM »

My shop was... the kitchen table......... hence, my wife suggested that this bonus room over the garage be converted to a shop.

Eric Smith · « **Reply #9 on:** March 19, 2012, 06:28:54 PM »

I hope to see a lot more pictures. Nice space.

omark · « **Reply #10 on:** March 19, 2012, 09:43:21 PM »

i really like the floor, did you stain it? thanks, mark

LehighBrad · « **Reply #11 on:** March 19, 2012, 10:55:17 PM »

Wow....between that awesome den picture a while back with the stone fireplace and the "Scatter Kindness" mantel sign and now this beautiful work shop taking place.....you wouldn't consider adoption would ya Dr. Tim??? Cuz I could move in as soon as that workshop is up and running!!

James · « **Reply #12 on:** March 19, 2012, 11:44:42 PM »

Nice looking floor and should work out well as a shop.

Dr. Tim-Boone · « **Reply #13 on:** March 19, 2012, 11:47:47 PM »

The WOCA Oil has the Brazil Brown pigment in it.

https://www.wocadirect.com/ https://www.wocadirect.com/about

LehighBrad..I am not adopting .... but might consider a live in gunmaking tutor............

omark · « **Reply #14 on:** March 20, 2012, 12:45:51 AM »

thanks dr, mark, sure is purty, ever think of using it on stocks? mark

wattlebuster · « **Reply #15 on:** March 20, 2012, 03:16:25 AM »

Very nice. Any flintlock will be proud to be made in there

Don Getz · « **Reply #16 on:** March 20, 2012, 03:43:14 AM »

Tim..........Is that REAL wood, or is it vinyl? Make sure you have a recliner and a TV in there.....Don

Roger Fisher · « **Reply #17 on:** March 20, 2012, 04:00:12 AM »

Man cave!

Dr. Tim-Boone · « **Reply #18 on:** March 20, 2012, 04:02:34 AM »

Don, That is " genuine" top nailed (with square cut nails) wideplank yellow southern pine!!! 6', 8' 10" and 12" wide planks 3/4" thick tongue and groove.... The best there is! We can get some shipped up to PA if you want it??? ... I been looking at where I might sneak the recliner in there....

My biggest decision left is whether to bolt the workbench to the wall or try to weight the bottom down?

News:

Author Topic: New shop taking shape (Read 7184 times)

dannybb55

mjm46@bellsouth.net

omark

LehighBrad

omark