« previous next »
Pages: [1]   Go Down

Author Topic: Flask Spout  (Read 2848 times)

mjm46@bellsouth.net

  • Guest
Flask Spout
« on: June 15, 2012, 06:01:24 PM »
A friend of mine aquired an old horn flask with a spring release for the spout, which he'd like to use. It is not a valuable antique Just old, and has been recently altered by the previous owner who drilled holes in the side to afix a lanyard of some type. I can restore the holes that were drilled.

What I need to know is where can I find a spout? The spout opening is threaded for a screw in spout, like the new ones currently for sale. I bought one of those the the threads are too small. Here is what I need: the inside diameter of the hole is .465" the outside diameter of the hole is .500" and the threads are .146" deep. The threads appear to be 32 threads per inch. I would like to get him a short pouring spout not a measure spout. For info only the new made spouts are .380", if anyone needs one I've got one, let me know.

Anyone who can help? I'd appreciate it.
« Last Edit: June 15, 2012, 06:04:02 PM by Micah »
Logged

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5123
Re: Flask Spout
« Reply #1 on: June 15, 2012, 08:34:06 PM »
Can't help with the spout alone, but have the spring release and spout as a combo, if you want to go thru the work of replacing the whole works.  Less than ten bucks.
« Last Edit: June 15, 2012, 09:11:13 PM by T*O*F »
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: Flask Spout
« Reply #2 on: June 15, 2012, 11:09:42 PM »
TOF,
Can you post/send a picture of the flask head and spout? If Micah passes, I may be interested.
Mark
Logged
Mark

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5123
Re: Flask Spout
« Reply #3 on: June 16, 2012, 01:14:21 AM »
Mark,
Ten  bucks ain't worth the 45 minutes it would take to prepare and upload the pictures.  They're the old spring valve and spout combo that Treso used to sell.  You should know what they look like.
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: Flask Spout
« Reply #4 on: June 16, 2012, 02:27:26 AM »
TOF,
You're right didn't know it was a Treso. If it is complete, base and spout I'll take it.
Mark
Logged
Mark
Pages: [1]   Go Up
« previous next »