Author Topic: Some Old Horns  (Read 3016 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Some Old Horns
« on: April 16, 2013, 03:45:51 PM »
 
 The first pic is of a group of horns that showed up at the Lancaster, Ohio Trade Fair last weekend.
The second shows a larger horn that has been painted, the unusual aspect of it is that the lobe has been added, it reminded me of Leighbrad’s horn. I looked closely but could not tell how it was attached, I did not get a head on pic of the base but you could not see any attachment point there either, it fit the base just like the rest of the horn.
 It was a good Trade Fair for the first year, a steady flow of folks both days. I look forward to next years.

   Tim C.   







Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Re: Some Old Horns
« Reply #1 on: April 16, 2013, 06:22:17 PM »
with the nail where it is... maybe an S shaped piece of horn that is held in place by it fitting up against the base of the plug and that nail just to make sure of it.

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: Some Old Horns
« Reply #2 on: April 16, 2013, 11:15:03 PM »
Tim,
Nice looking group of horns. Glad the fair was a success but you were missed in Marietta. We have to try to coordinate dates better for next year.
Mark
Mark

Offline Jerry V Lape

  • Hero Member
  • *****
  • Posts: 3028
Re: Some Old Horns
« Reply #3 on: April 16, 2013, 11:18:14 PM »
How about the lip was dovetailed/fastened into the edge of the base plug first and then fitted to the horn as an assembly with the one nail as additional security. 

LURCHWV@BJS

  • Guest
Re: Some Old Horns
« Reply #4 on: April 21, 2013, 04:22:11 PM »
I missed Lancaster and Marrietta? #@!! $#@*!!!

  I really need to check the board more often.
  Been busy making knives on my day's off. I have thirty orders to fill.
 Remember the friction folder in Damascus?
 I really wanted to hit Lancaster though

  Rich