« previous next »
Pages: [1]   Go Down

Author Topic: Stock Wax  (Read 6935 times)

Offline frogwalking

  • Hero Member
  • *****
  • Posts: 1044
Stock Wax
« on: August 23, 2013, 02:45:12 AM »
Do you folks put any kind of stock wax on after the finish is dry?  How long do you wait, and what do you use? 

Thanks,

Frog
Logged
Quality, schedule, price; Pick any two.

Offline Joe Schell

  • Full Member
  • ***
  • Posts: 208
Re: Stock Wax
« Reply #1 on: August 23, 2013, 02:49:57 AM »
I use Johnson's paste wax after the finish has dried in the sun for a couple days.
Logged

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2084
Re: Stock Wax
« Reply #2 on: August 23, 2013, 02:52:17 AM »
+1 for johnsons paste wax.  Good stuff ;D
Logged
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

eddillon

  • Guest
Re: Stock Wax
« Reply #3 on: August 23, 2013, 02:57:39 AM »
Johnson's.  Use it on wood and metal.
Logged

Meteorman

  • Guest
Re: Stock Wax
« Reply #4 on: August 23, 2013, 05:16:27 AM »
BriWax.
Not sure its any better than Johnsons, except you can get it
in colors ( like dark brown) which will make any slight gaps you
may have virtually invisible.  But i know none of us have any gaps... ;D
Logged

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9919
  • Kill a Commie for your Mommy
Re: Stock Wax
« Reply #5 on: August 23, 2013, 05:39:05 AM »

Quote from: frogwalking on August 23, 2013, 02:45:12 AM
Do you folks put any kind of stock wax on after the finish is dry?  How long do you wait, and what do you use? 

Thanks,

Frog

Only if I think I might get glue on the finish.

Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

Offline Dave R

  • Hero Member
  • *****
  • Posts: 678
Re: Stock Wax
« Reply #6 on: August 23, 2013, 06:30:11 AM »
If wax is applied after the finish is dry is it possible 2 or 3 years later to apply an additional coat of finish without it beading up ?
Logged

Offline rsells

  • Hero Member
  • *****
  • Posts: 680
Re: Stock Wax
« Reply #7 on: August 23, 2013, 07:52:16 AM »
Johnson's paste wax for me.
                      Roger Sells
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Stock Wax
« Reply #8 on: August 23, 2013, 08:28:27 AM »
I use Renaissance Wax on contemporary and antique firearms because it is clear and doesn't affect the color.   You can strip most any wax with mineral spirits or denatured alcohol.   However,  it will wear off fairly quickly when handled.    Also, the Ballistol I use for cleaning my guns after shooting will strip the wax because it basically is wax.   It is medical grade paraffin.  I have never had trouble adding more finish.   
Logged

sweed

  • Guest
Re: Stock Wax
« Reply #9 on: August 23, 2013, 11:04:30 PM »
Johnson's on while stock is still hot from the sun! If there's any open cells they will be filled up. Think waterproof. If you have the patience and don't mind the hard work, :P rub it in hard with the heel of your hand, or a piece of fine canvas or denim. You will be pleasantly surprised at the results! :o  8)
Logged

Birddog6

  • Guest
Re: Stock Wax
« Reply #10 on: August 25, 2013, 04:00:25 PM »
I use Howards Paste Wax. I get the Walnut color & it leaves no white lines in the carvings & etc.  Also works good in sealing the barrel channel & misc places you want to keep water out if hunting in the rain.  Renaissance Wax  is a good wax & what allot of museums use on their firearms.

Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19471
    • GillespieRifles
Re: Stock Wax
« Reply #11 on: August 25, 2013, 08:48:55 PM »
Howard also makes a "Feed-N-Wax" "Wood Preserver" made with Beeswax and Orange Oil that is great for using on any type of wood. Also smells good! Most Lowe's and Home Depot's sell it.
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Vomitus

  • Guest
Re: Stock Wax
« Reply #12 on: August 26, 2013, 01:35:58 AM »
You might laugh me out of towne, but I used a German auto wax,veg based on a rifle that the finish lifted after being out in the rain.It's called Zymol. No probs in the rain now!
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19471
    • GillespieRifles
Re: Stock Wax
« Reply #13 on: August 26, 2013, 01:59:18 AM »
Quote
German auto wax
Oh no :( That is only for use on Jäger rifles ;D
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Vomitus

  • Guest
Re: Stock Wax
« Reply #14 on: August 26, 2013, 10:55:35 AM »
 Den,is a Virginian close enough? lol! ;D
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19471
    • GillespieRifles
Re: Stock Wax
« Reply #15 on: August 26, 2013, 06:06:08 PM »
Quote
Den,is a Virginian close enough? lol! Grin
Should be since many of the early Virginian's were German, self included!
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline frogwalking

  • Hero Member
  • *****
  • Posts: 1044
Re: Stock Wax
« Reply #16 on: August 28, 2013, 04:07:01 PM »
I have a can of Laurel Forge gunstock wax.  Previously, I used it on a freshly finished stock that had dried for over a month.  The wax damaged the finish on the stock, or so it appeared.  Has anyone successfully used this product?  Maybe I did something wrong. 
Logged
Quality, schedule, price; Pick any two.
Pages: [1]   Go Up
« previous next »