« previous next »
Pages: [1]   Go Down

Author Topic: Source for Horn  (Read 6088 times)

dlbarr

  • Guest
Source for Horn
« on: March 04, 2014, 11:53:02 PM »
Looking for some horn for the nosecap on a current build. Ordered from TOW their "ugly horn" last week. Apparently, alot of others did also as my order was short one ugly horn. Called them and they are "OUT" again with no expectation of when next shipment will come in.  ???

Anybody know of another source for this item? Was hoping to get this part done this week....
Logged

d-a

  • Guest
Re: Source for Horn
« Reply #1 on: March 05, 2014, 12:44:25 AM »
You can get horns from Tandy leather.

d-a
Logged

Offline axelp

  • Hero Member
  • *****
  • Posts: 1547
    • TomBob Outdoors, LLC.
Re: Source for Horn
« Reply #2 on: March 05, 2014, 12:54:18 AM »
try John Shorb at www.powderhornsandmore.com
Logged
Galations 2:20

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Source for Horn
« Reply #3 on: March 05, 2014, 04:37:05 AM »
Maybe try the Honorable Horner's Guild for connections.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Source for Horn
« Reply #4 on: March 05, 2014, 04:39:04 AM »
If you are looking for solid horn I bought horn from the following link for a Jaeger I built years ago.  I bought the buffalo horn middles.
http://www.masecraftsupply.com/servlet/the-Horn/Categories
David
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Source for Horn
« Reply #5 on: March 05, 2014, 05:24:43 AM »
I buy mine from Roland Cadle at Village Restorations; http://www.villagerestorations.com/everything_horn.     Actually,  I try to buy them from him at Dixons.   He is the one who always has the big pile of horns for sale.   I usually hunt through the stack and fill a bag with some.   When I couldn't get to Dixons,  I ordered them from him.   He has polished horns and raw horns.    I try to keep a box full of polished horns; and box of raw horns for turning stock. 
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Source for Horn
« Reply #6 on: March 05, 2014, 05:29:11 AM »
You know,  if you lived in central VA,  you could come and get something out of my scrap box for free.    ;)
Logged

dlbarr

  • Guest
Re: Source for Horn
« Reply #7 on: March 05, 2014, 06:02:12 AM »
Quote from: Mark Elliott on March 05, 2014, 05:29:11 AM
You know,  if you lived in central VA,  you could come and get something out of my scrap box for free.    ;)

I have kids on the east coast. Maybe I'll drop by for a visit.  ;D
« Last Edit: March 05, 2014, 06:07:24 AM by Dave »
Logged

Offline whitebear

  • Hero Member
  • *****
  • Posts: 837
Re: Source for Horn
« Reply #8 on: March 05, 2014, 08:01:01 AM »
Try Petco.com for water buffalo horns.  Three sizes the largest I think is 12" for about $15.00.
Logged
In the beginning God...
Georgia - God's vacation spot

dlbarr

  • Guest
Re: Source for Horn
« Reply #9 on: March 05, 2014, 08:56:20 AM »
Quote from: whitebear on March 05, 2014, 08:01:01 AM
Try Petco.com for water buffalo horns.  Three sizes the largest I think is 12" for about $15.00.

PETCO? WATER Buffalo horns? You're killin' me, WB

I think I smell a setup here....  ::)  must have "SUCKER" written on my forehead....

_______________________________________________________________________

10 min later....  you weren't kidding. They got 'em. I really did think you were messin' with me. Too funny....

they're actually not a bad price either
« Last Edit: March 05, 2014, 09:10:59 AM by Dave »
Logged

Offline KentSmith

  • Hero Member
  • *****
  • Posts: 1005
    • Augusta Gunworks
Re: Source for Horn
« Reply #10 on: March 05, 2014, 06:48:10 PM »
Call Roland Cadle 814-312-1825.  He has some long raw horns that he will cut for you so shipping is not a pain.  They get very thick towards the tip and are excellent for bands and nose caps.  I got a 30" horn at Lewisburg, cut the horn 16" from the tip and the walls are at least 1/2 thick at that point.  I will get a lot of bands and enough material to make horn nose caps at need.
Logged

Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Re: Source for Horn
« Reply #11 on: March 05, 2014, 09:16:29 PM »
Logged

eddillon

  • Guest
Re: Source for Horn
« Reply #12 on: March 06, 2014, 03:31:49 AM »
Email me a sketch or a photo of what you need.  I have some Australian water buffalo horn that is solid and aged so you don't have to worry about cracking or shrinkage.  If you want hollow horn, I have that too.  Sure don't like the aroma produced when band sawing this stuff but the end result makes up for the stench of burnt hair!  My email address is in my profile.  We'll work out something to trade.
Ed
Logged

dlbarr

  • Guest
Re: Source for Horn
« Reply #13 on: March 06, 2014, 08:48:43 PM »
Thanks, Ed. Don't find your email at your profile however....
Logged

eddillon

  • Guest
Re: Source for Horn
« Reply #14 on: March 06, 2014, 09:08:14 PM »
Dave,  PM sent.
Logged

eddillon

  • Guest
Re: Source for Horn
« Reply #15 on: March 08, 2014, 12:22:10 AM »
Box on the way to you, Dave.
Ed
Logged
Pages: [1]   Go Up
« previous next »