Author Topic: Walnut oil?  (Read 3628 times)

Offline Z. Buck

  • Hero Member
  • *****
  • Posts: 654
  • Fabricati Diem Pvnc
Walnut oil?
« on: July 29, 2014, 05:19:55 AM »
So somehow I missed the memo that walnut oil is a setting type oil until a couple weeks ago. Currently using it on a butcher block, unstained rock maple, only one coat so far but it is really absorbing well and making the grain pop and shine like nothing. Anyone have opinions on it's usefulness as a gun stock finish?
I Make Inflammatory Statements

Be Prepared

galamb

  • Guest
Re: Walnut oil?
« Reply #1 on: July 29, 2014, 06:15:02 AM »
In an outdoor environment it is not as durable as linseed oil.

You ARE using it for one of it's best uses - in contact with any wood that you want to protect that comes in direct contact with food - you can "eat" the stuff :)  (a little better/longer lasting than soy or canola oil on cutting boards, butcher blocks etc).

I don't know if you could improve it's durability if used outdoors by adding anything to it - perhaps someone else can chime in here.


Offline bob in the woods

  • Hero Member
  • *****
  • Posts: 4556
Re: Walnut oil?
« Reply #2 on: July 29, 2014, 04:10:49 PM »
I use a mixture of walnut oil and beeswax on gunstocks and have used it on my table that spends a lot of time outdoors. It has stood up well.  Just make sure you give it lots of sunlight , which will help with the drying .I think it makes an outstanding finish on my pine furniture.

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Walnut oil?
« Reply #3 on: July 29, 2014, 04:30:30 PM »
i used to use raw walnut oil to finish redwood burl coffee tables. It is beautiful!
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5574
Re: Walnut oil?
« Reply #4 on: July 29, 2014, 06:57:11 PM »
 All I know about walnut oil, is what I learned in a art history course in college. Early artists, tried walnut oil, in place of linseed oil, in their paint mixtures, and found it never dried, when applied to a surface that was effectively sealed, like a sized, and gessoed, canvas.

                Hungry Horse

eddillon

  • Guest
Re: Walnut oil?
« Reply #5 on: July 29, 2014, 09:04:38 PM »
Makes wonderful salad dressing.   ;D

Offline KentSmith

  • Hero Member
  • *****
  • Posts: 1005
    • Augusta Gunworks
Re: Walnut oil?
« Reply #6 on: July 29, 2014, 09:39:20 PM »
I used walnut oil on a rifle I built in the 90's.  Beautiful finish but hunting in the snow rubbed most of the wrist area off.  Didn't try cooking it with lead or resin like I do linseed oil. 

Many old violins were finished with walnut oil based varnish, cooked in a similar fashion to linseed oil varnishes.  I do not know any that were plain walnut oil finish.  And I don't know anyone who hunted in the elements with a violin.

Offline Virginiarifleman

  • Sr. Member
  • ****
  • Posts: 489
Re: Walnut oil?
« Reply #7 on: July 31, 2014, 04:38:17 PM »
if I played the Violin in the woods........things would definitely fall over.but ive never fiddled around with walnut oil as stain.
« Last Edit: July 31, 2014, 04:40:01 PM by Virginiarifleman »