Author Topic: rasps (Read 10081 times)

D. Taylor Sapergia · « **on:** January 31, 2015, 11:58:30 PM »

I have a couple of rasps that I really love to work with. They cut hard maple fast and clean, with lots of control. The first is a half round that must be very much like a Nicholson 49 or 50...perhaps someone here can fill me in on that. It is made by Black Diamond in Canada.

This second one is just a magic thing! It is a rat tailed rasp about 3/8" dia and about 12" long. It seems to stay sharp forever and again, cuts wonderfully well without the slightest tearing. It is made by Nicholson.

Acer Saccharum · « **Reply #1 on:** February 01, 2015, 01:48:59 AM »

I copied and pasted this into the Rasp tutorial. Thanks, Taylor. This is good info.

Tom

Stoner creek · « **Reply #2 on:** February 01, 2015, 02:07:15 AM »

Sure would like to get my paws on that rat tail. Where do we find one?

Bob Roller · « **Reply #3 on:** February 01, 2015, 02:41:23 AM »

Taylor,
Is Black Diamond still made in Canada today? I have a few BD files but they aren't for wood work.
Oddly enough,I have recently bought rat tail files from Harbor Freight and Home Depot that are really
good. Not doubt made in China but they seem to work'

Bob Roller

D. Taylor Sapergia · « **Reply #4 on:** February 01, 2015, 09:25:31 AM »

I don't know Bob. I've had a good store of files for a very long time, and draw upon the stash as I need them. I bought the rat tail file in a tool store many years ago...can't even remember where in town it was...but I did buy a new flat single cut mill bastard about two years ago from one of our local suppliers, and was told it was Chinese, but of good quality. He was right. it is very sharp, hard, and continues to be a great file. So not all off-shore stuff is junk.

Can anyone comment on the similarity or difference between my rasp and a Nicholson 49/50?

kaintuck · « **Reply #5 on:** February 01, 2015, 03:14:51 PM »

They just like some of the ones I use....,you can bend them to get into areas tighter than you straight rasps....the handmade ones are the best, but $$$$ and the Japanese make SUPER nice planes to cut the rasped areas.......sigh, once again $$$$$$$$$$$......

" but honey, I have all these tools, I HAVE to out in the shop to make stuff...tell you what, let me take you out to eat tonight" ......

THAT get said a lot I bet!

Marc n tomtom

Brian · « **Reply #6 on:** February 01, 2015, 08:15:56 PM »

Quote from: D. Taylor Sapergia on February 01, 2015, 09:25:31 AM

I don't know Bob. I've had a good store of files for a very long time, and draw upon the stash as I need them. I bought the rat tail file in a tool store many years ago...can't even remember where in town it was...but I did buy a new flat single cut mill bastard about two years ago from one of our local suppliers, and was told it was Chinese, but of good quality. He was right. it is very sharp, hard, and continues to be a great file. So not all off-shore stuff is junk.

Can anyone comment on the similarity or difference between my rasp and a Nicholson 49/50?

Taylor - I have a couple of new 49's and 50's. I'll bring one of each along next time I' headed your way and you can compare them with what you have.

D. Taylor Sapergia · « **Reply #7 on:** February 01, 2015, 09:04:34 PM »

Fantastic! ...looking forward to your visit.

John Archer · « **Reply #8 on:** February 01, 2015, 10:03:03 PM »

Hi Taylor,

I believe the black diamond rasp was made by Nicholson in Canada in the good old days and had a higher carbon content than their regular rasps. As far as I know they are no longer being made anywhere. I have a few black diamond files, not rasps...I get a couple of local tool guys to funnel them my way when they come across them at garage/estate sales.
The teeth on the patternmakers rasps are set randomly like hand-raised teeth.

John.

raszpla · « **Reply #9 on:** February 01, 2015, 11:23:43 PM »

http://www.befana.com.pl/tarniki <-- Good Polish manufacturer

Gaeckle · « **Reply #10 on:** February 02, 2015, 12:36:39 AM »

Quote from: raszpla on February 01, 2015, 11:23:43 PM

http://www.befana.com.pl/tarniki <-- Good Polish manufacturer

Great.....if your in Europe........any distributors in the USA?

raszpla · « **Reply #11 on:** February 02, 2015, 12:50:07 AM »

Tomorrow I will try to call and ask .

WadePatton · « **Reply #12 on:** February 02, 2015, 12:51:30 AM »

Having very little actual "proper wood rasp" experience, but learning much more about using one as I hoof rasped my last stock--I just remembered that Dennis had sold me a NOS Nicholson #50 recently.

So I dug it out to finish squaring up some walnut to make a tool. Another piece of firewood, nabbed away for shop purposes.

And it's a wonderful tool. Just too easy, feels like a quantum leap. Like how it cuts and feels in the hand (half a pound lighter eh

) and and and a curved surface too. Very pleased. Thanks Dennis!

smokinbuck · « **Reply #13 on:** February 02, 2015, 01:02:00 AM »

Taylor,
I picked up a Red Tang file by Heller, brand new, at a flea market. Looks just like your half round but is flat. Paid $5.00 for it and wish the guy had a half dozen more.
Mark

ScottH · « **Reply #14 on:** February 02, 2015, 01:02:50 AM »

Taylor,
I believe that I would just about give up a body part for a rasp like that rat tail model LOL

I think if one really wants a quality rasp, that Liogier in France is likely the best bet. I should start saving $$$ now!

Gaeckle · « **Reply #15 on:** February 02, 2015, 02:23:49 AM »

Quote from: raszpla on February 02, 2015, 12:50:07 AM

Tomorrow I will try to call and ask .

Wait a second.....the answer is so obvious......wanna send some to the USA, make a buck or two for your efforts?

raszpla · « **Reply #16 on:** February 02, 2015, 12:49:30 PM »

you ask me - if I can send the tool to the US? - Of course, I can do .

I am waiting for a reply from the office factory - probably is the American distributor.

Dr. Tim-Boone · « **Reply #17 on:** February 02, 2015, 05:38:31 PM »

How about this one

Narex 8 mm 5/16" Round Cabinetmaker's Rasp
by Narex
2 customer reviews
Price: $18.99 Free Shipping for Prime Members
In Stock.
Sold by Taylor Toolworks and Fulfilled by Amazon. Gift-wrap available.
Want it TODAY, Feb. 2 to 30064? Order within 2 hrs 22 mins and choose Same-Day Delivery at checkout.

Made by a small tool manufacturer in the Czech Republic and is of exceptional quality.
The blade is made from tool steel and then hardened to RC 45.
Blades are CNC stitched producing a uniform tooth pattern allowing for a steady and even removal
Handle is 5 3/4" long, 1 1/2" in diameter w/ brass ferrule. Handle is made hard and dense Hornbeam.
Blade is 8 mm mm in diameter by 200 mm (8") long. Overall length is 345 mm (14")

Narex (Made in Czech Republic) 10 mm 3/8" Round Cabinetmaker's Rasp
5.0 out of 5 stars (1)
$19.99

D. Taylor Sapergia · « **Reply #18 on:** February 02, 2015, 08:06:30 PM »

Tim: that is a great looking rasp. It may be perhaps a bit finer cut than mine, but I think it would serve well.

WadePatton · « **Reply #19 on:** February 03, 2015, 02:29:54 AM »

Thanks Tim!

i gets free shipping!

ScottH · « **Reply #20 on:** February 03, 2015, 04:31:47 AM »

Wade
Did you order one through Amazon?
If so I would love to have your feed back on it once it arrives!
Scott

smallpatch · « **Reply #21 on:** February 03, 2015, 05:06:31 AM »

Taylor,
A couple years back, I spent WAY too much for a hand stitched Swiss Patternmakers rasp. I think it was like $80 ? Thing is amazing! Smooth, fast. Cuts wood like butter, and leaves a smooth surface.
Well worth the cost!!!!

WadePatton · « **Reply #22 on:** February 03, 2015, 05:07:51 AM »

Quote from: ScottH on February 03, 2015, 04:31:47 AM

Wade
Did you order one through Amazon?
If so I would love to have your feed back on it once it arrives!
Scott

No not yet. Other things have priority this week(end). But it is on the wishlist (so i don't forget)

News:

Author Topic: rasps (Read 10081 times)

kaintuck

raszpla

raszpla

raszpla