« previous next »
Pages: [1]   Go Down

Author Topic: A flat horn with a twist  (Read 7406 times)

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
A flat horn with a twist
« on: February 02, 2015, 03:53:09 AM »
Made this one a month or so ago so some of you may have seen it but I thought I would share it here. I flattened this horn with the curve still in it and then put the facets on the sides. I did a little Dutch style polychroming and used curly maple for the base. As I started doing the engraving I dropped the horn and cracked the tip so it actually has a two piece applied tip. it is about 10 3/4 in. long and 1 in. thick. I also made the drawer pulls that are shown on it. I hope you like it and all comments or critique are welcome.

Ron



« Last Edit: February 02, 2015, 03:54:23 AM by Gun Butcher »
Logged
Member Honorable Company of Horners
Member of the CLA

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: A flat horn with a twist
« Reply #1 on: February 02, 2015, 04:32:11 AM »
I love this horn Ron. I know it was a challenge at first but it came out well. I also like the scrim. One of your best.

Steve
Logged
Steve Skillman

Offline Osprey

  • Hero Member
  • *****
  • Posts: 1355
  • Roaming Delmarva...
Re: A flat horn with a twist
« Reply #2 on: February 02, 2015, 04:02:20 PM »
Very cool!
Logged
"Any gun built is incomplete until it takes game!"

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Re: A flat horn with a twist
« Reply #3 on: February 02, 2015, 04:16:28 PM »
 Great horn, really well done. I like the carving design and execution. 

    Tim C.
Logged

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7911
Re: A flat horn with a twist
« Reply #4 on: February 02, 2015, 08:36:45 PM »
I agree with everyone else, very nice.
Logged

Offline old george

  • Hero Member
  • *****
  • Posts: 712
Re: A flat horn with a twist
« Reply #5 on: February 02, 2015, 09:03:19 PM »
That is a beautiful horn. Way to nice to leave in a hunters pouch :)

geo
Logged
I cannot go to Hades: Satan has a restraining order against me. :)

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: A flat horn with a twist
« Reply #6 on: February 02, 2015, 11:25:14 PM »
You may be the "Gun Butcher" but certainly not the "Horn Butcher". Very Nice.
Mark
Logged
Mark

Offline Tony N

  • Hero Member
  • *****
  • Posts: 646
  • Rabbit Hash,Ky
Re: A flat horn with a twist
« Reply #7 on: February 03, 2015, 12:50:56 AM »
Beautiful work!!

~Tony
Logged

Offline George Sutton

  • Hero Member
  • *****
  • Posts: 755
Re: A flat horn with a twist
« Reply #8 on: February 03, 2015, 02:11:47 AM »
Great Work!
Logged

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: A flat horn with a twist
« Reply #9 on: February 03, 2015, 02:40:48 AM »
Thanks everyone. This one started out to just see if I could flatten a horn with the curve in it and the more I worked the more it seemed to take on a life of its own.
Ron
Logged
Member Honorable Company of Horners
Member of the CLA

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: A flat horn with a twist
« Reply #10 on: February 04, 2015, 05:41:34 AM »
Not that you need me to tell you so,  but that is very nice work!
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3707
Re: A flat horn with a twist
« Reply #11 on: February 05, 2015, 02:11:35 AM »
That horn makes me smile in a really good way.  Very creative.  You should be proud of that one.   Best wishes,  Marc
Logged

huntmaster80

  • Guest
Re: A flat horn with a twist
« Reply #12 on: February 05, 2015, 05:55:59 AM »
wow that is a great looking horn!!!
Logged

Offline Algae

  • Full Member
  • ***
  • Posts: 197
Re: A flat horn with a twist
« Reply #13 on: February 05, 2015, 04:55:41 PM »
Absolutely gorgeous!!
Logged

poor hunter tim

  • Guest
Re: A flat horn with a twist
« Reply #14 on: February 24, 2015, 05:22:18 AM »
Not only sweet, but great combination of elements and imagination, to create something with deferent twist. nice!
Logged
Pages: [1]   Go Up
« previous next »