Thanks Dan Phariss

[J. Talbert]

I ran into the old problem of the front lock screw encroaching on the ramrod hole on my current project.  I decided to try Dan's little scraper as he describes in the "Shop made tools" section.  I made one of the scrapers easily enough and it worked well with minimal effort to enlarge the channel away from the screw.

Thanks Dan!

Jeff

[Acer Saccharum]

That is a priceless tip from Dan.

[D. Taylor Sapergia]

I made one too, shortly after Dan introduced it, and agree:  it's a gem!

[Robby]

Yep, me too. Thanks Dan!
Robby