« previous next »
Pages: [1]   Go Down

Author Topic: going to do it  (Read 3209 times)

Offline Daniel

  • Sr. Member
  • ****
  • Posts: 472
going to do it
« on: April 25, 2015, 08:29:56 PM »
Well going to try to build again. Got a 38" x .54 smooth barrel , a maple plank ,
and a Dickert lock. Going for a southern but not too deep southern smooth rifle.
Jack DuPrey is helping with a pattern.
Logged
Daniel     Ecc.4:12

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: going to do it
« Reply #1 on: April 25, 2015, 08:30:53 PM »
Good news, Daniel!
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Michigan Flinter

  • Hero Member
  • *****
  • Posts: 625
Re: going to do it
« Reply #2 on: April 26, 2015, 01:16:22 AM »
 If you have JACK helping you it will be made right .He is a very good rifle builder. Hope to see him tomorrow at our Three Fires meet at Broken Lock Muzzleloaders gun club near Alma Mi.
Logged

kaintuck

  • Guest
Re: going to do it
« Reply #3 on: April 26, 2015, 02:50:38 PM »
Welcome to the madness......for some reason, we start to only make "one" rifle......then all of the sudden, we find ourselves years later, still building, wishing for a old log cabin shop with a pot bellied stove and ornery Tom cat for company.........

Crazy hobby....... ;D

You'll know it bad when you have most of the supplies phone numbers in your cell phone, and know their first names...... :D


 Marc n tomtom
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: going to do it
« Reply #4 on: April 26, 2015, 06:41:20 PM »
Daniel,

If you are going to build a southern gun, as in Virginia, North Carolina, Tennessee, etc., you might want to consider using an English styled lock, rather than the Germanic Dickert lock.  The Dickert would be good for a southern Pennsylvania gun. ;)

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Ryan McNabb

  • Full Member
  • ***
  • Posts: 234
    • McNabb's Station
Re: going to do it
« Reply #5 on: April 26, 2015, 10:19:51 PM »
.
« Last Edit: April 26, 2015, 10:22:48 PM by Ryan McNabb »
Logged

Offline Daniel

  • Sr. Member
  • ****
  • Posts: 472
Re: going to do it
« Reply #6 on: April 27, 2015, 03:34:24 AM »
Going to move ahead with the Dickert, because I dropped it and chipped the tail end.
Going to reshape a bit, and give it my best.
Logged
Daniel     Ecc.4:12
Pages: [1]   Go Up
« previous next »