Author Topic: finding time  (Read 5387 times)

Willbarq

  • Guest
finding time
« on: November 02, 2015, 05:28:33 AM »
It seems people like to interrupt my working just at a critical point. My attentions get spread too thin and finding uninterrupted time is difficult! Any of you have this challenge? Who keeps your home fires burning while you are trying to build a gun?

Offline bob in the woods

  • Hero Member
  • *****
  • Posts: 4555
Re: finding time
« Reply #1 on: November 02, 2015, 07:04:34 AM »
I live in the woods, and allow visitors by appointment only.  Long lane with a gate. Don't answer the phone when I'm working.  Easy  ;D

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: finding time
« Reply #2 on: November 02, 2015, 03:01:16 PM »
I live in the woods, and allow visitors by appointment only.  Long lane with a gate. Don't answer the phone when I'm working.  Easy  ;D
Ditto. Only I live in a corn field..... ;D
« Last Edit: November 02, 2015, 03:01:32 PM by Mike Brooks »
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9694
Re: finding time
« Reply #3 on: November 02, 2015, 03:04:26 PM »
It seems people like to interrupt my working just at a critical point. My attentions get spread too thin and finding uninterrupted time is difficult! Any of you have this challenge? Who keeps your home fires burning while you are trying to build a gun?

While working in the shop I seldom answer the phone unless I recognize the number. Those with "Unknown Caller" or "Uknown name" or "Blocked number" are not welcome. Too much politicking on the phone now and soliciting sales calls and phone scams are more than I will put up with. I used to set the call forwarding to send calls to a "Dial a Prayer" number or to a known cathouse in the Eastern end of the county. The regional jail now sits where it once was and that seems appropriate.
My wife works for the city and I have a motion detector in the house that sounds off in the shop if someone forces the front door.
Drop in company is rare and the last one from out of town was Jud Brennan and Micky Brackett last year.
They were welcome.
Anyone wanting to call me should wait until after 7PM Easter Time.

Bob Roller

Offline Bill Ladd

  • Sr. Member
  • ****
  • Posts: 332
Re: finding time
« Reply #4 on: November 02, 2015, 03:36:21 PM »
...7PM Easter Time...

We can only call you one evening each year?  Been wanting to talk to you about a lock, but I guess I can wait 5 months.

 ;D ;D ;D ;D

Offline Eric Krewson

  • Hero Member
  • *****
  • Posts: 2257
Re: finding time
« Reply #5 on: November 02, 2015, 04:37:37 PM »
I had a number of friends as if they could just sit in my shop and watch me work to learn bowmaking. I let one friend come over and found he felt the need to tell me how I should be making bows not watching how I was making them. I was a much more accomplished bow maker than he was. One day with a guest in my shop taught me that serious shop work is better done alone, no more visitors unless they are actual students and I don't plan on getting any work done.
« Last Edit: November 02, 2015, 04:38:34 PM by Eric Krewson »

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1862
    • My etsy shop
Re: finding time
« Reply #6 on: November 02, 2015, 04:46:10 PM »
The home fires are generally not an issue.  My real job is what gets in the way.  I was making good progress this weekend but I had to stop to go inside to grade papers so I could give them back today.

Offline flehto

  • Hero Member
  • *****
  • Posts: 3335
Re: finding time
« Reply #7 on: November 02, 2015, 05:01:47 PM »
When I was working at my day job and another nearly full time design checking business,  prioritizing allowed me to complete a few MLers, Sure I was quite busy, but then that's how I liked it. Whether you have time to work on guns is purely up to you....make some time by whatever means.....Fred

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: finding time
« Reply #8 on: November 02, 2015, 05:38:34 PM »
For me,  it is just a matter of getting myself out to the shop.  I have regular times setup for shop work.   I screen my calls, and will not answer the phone if I am in the middle of something.   

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: finding time
« Reply #9 on: November 02, 2015, 07:00:04 PM »
Just ask my wife, she will tell you I have no problem ignoring everything and everybody when I am working in my shop.  It is real easy to get distracted with all the other stuff if you don't treat working at home like a job on the outside.
David

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: finding time
« Reply #10 on: November 02, 2015, 07:36:53 PM »
It is my observation that people in general, do not respect your work as a business, when it is in your own shop at home.  I don't know what the difference is, but some think nothing about dropping by just to chat, or to ask for some assistance on one of their projects, most with the expectation that your help is gratis.  This happens very infrequently, thankfully, and I truthfully don't mind stopping to visit and have a cup of coffee with most of those who drop in.  What erks me though, is having to stop when I'm on a roll, for scheduled appointments, or other obligations.  Trying to run a cutlery sharpening business with the need to provide the household with a certain amount every month, is both a spiritual and creativity annoyance.  That all goes away December 31, 2015, when I officially retire!!!!
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Pete G.

  • Hero Member
  • *****
  • Posts: 2013
Re: finding time
« Reply #11 on: November 03, 2015, 03:02:05 AM »
I had my wife's cousin drop by and her husband came out to the shop to watch as I neatly dovetailed all three tennons neatly into the side of the barrel. :o :(

Willbarq

  • Guest
Re: finding time
« Reply #12 on: November 03, 2015, 04:56:01 AM »
Just exasperated , so that is what brought out the NON topic really.  Glad ya'll chimed in.








Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: finding time
« Reply #13 on: November 03, 2015, 06:19:28 AM »
I can work on my guns anytime I want. Cause I'm retired an the wife is gone shopping.  But  I average 1 gun a year. She don't shop enough!!

Willbarq

  • Guest
Re: finding time
« Reply #14 on: November 03, 2015, 07:02:49 AM »
I had my wife's cousin drop by and her husband came out to the shop to watch as I neatly dovetailed all three tennons neatly into the side of the barrel. :o :(

eek! distractions!

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master  Engraver FEGA.
Re: finding time
« Reply #15 on: November 03, 2015, 08:49:47 AM »
  The good part about engraving is nobody ever tries to tell you how. Taylor is right when he said if you work at home people don't think you work. A few years ago I told a guy that I worked 60 hours a week and he asked my Where?  I actually don't need to work anymore but life is a lot better if I do. People don't bother me. What I can't stand is boredom and deadlines. I'm too old for deadlines.
Nobody is always correct, Not even me.