« previous next »
Pages: [1]   Go Down

Author Topic: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.  (Read 3635 times)

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« on: August 21, 2016, 11:11:09 PM »
Help, I need a 3/4-16 tap bolt, or a piece of 3/4 -16 threaded rod at least 2" long for a breech plug. It's for the Barrel Runar and rifled a couple of weeks a ago. Can't find this in Norway.

Best regards
Rolf
Logged

Offline James

  • Hero Member
  • *****
  • Posts: 627
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #1 on: August 22, 2016, 12:53:57 AM »
Let me check, I think I have 40 or 50 pounds of these around 3 inches long.
Logged
"Guard with jealous attention the public liberty. Suspect everyone who approaches that jewel. Unfortunately, nothing will preserve it but downright force. Whenever you give up that force, you are ruined... The great object is that every man be armed. Everyone who is able might have a gun." P.Henry

Offline James

  • Hero Member
  • *****
  • Posts: 627
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #2 on: August 22, 2016, 01:06:37 AM »
Sorry, all the ones I have are NC 10 threads/inch.  I would gladly procure the correct ones for you if you want to cover costs.  PM me if so.
Logged
"Guard with jealous attention the public liberty. Suspect everyone who approaches that jewel. Unfortunately, nothing will preserve it but downright force. Whenever you give up that force, you are ruined... The great object is that every man be armed. Everyone who is able might have a gun." P.Henry

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #3 on: August 22, 2016, 02:48:20 AM »
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline Scott Bumpus

  • Sr. Member
  • ****
  • Posts: 481
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #4 on: August 22, 2016, 05:31:31 AM »
http://www.mcmaster.com/#98750A495  McMaster Carr  has this  4"  for 3.23 dollars
Logged
YOU CAN ONLY BE LOST IF YOU GIVE A @!*% WHERE THE $#*! YOU ARE!!

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #5 on: August 22, 2016, 04:38:29 PM »
Quote from: SingleMalt on August 22, 2016, 02:48:20 AM
What about this?

https://www.trackofthewolf.com/Categories/PartDetail.aspx/659/1/PLUG-FT-16-3
Won't work . The barrel is for one of the dreaded underhammer rifles-

Best regards
Rolf
Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #6 on: August 22, 2016, 04:56:58 PM »
Quote from: Scott Bumpus on August 22, 2016, 05:31:31 AM
http://www.mcmaster.com/#98750A495  McMaster Carr  has this  4"  for 3.23 dollars


Checked the website. They estimate shipping one 4" bolt to Norway to cost  $32,00 which is nuts( shipped international priority). I have orderd a bolt and asked them to mail it USPS first class international mail which should cost about $13.50 .  Keeping fingers crossed. Migth end up paying $40 for a 3$ bolt. 

Best regards
Rolf
Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #7 on: August 22, 2016, 04:58:42 PM »
Quote from: James on August 22, 2016, 01:06:37 AM
Sorry, all the ones I have are NC 10 threads/inch.  I would gladly procure the correct ones for you if you want to cover costs.  PM me if so.

Thank you for Your kind offer. I'll pm you if Mc Carr falls through.

Best regards
Rolf
Logged

Offline tim crowe

  • Full Member
  • ***
  • Posts: 196
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #8 on: August 22, 2016, 05:13:59 PM »
Rolf, for the cost of shipping might as well buy 2 bolts? Then you have a spare.
 Cheers
 Tim
Logged

Offline okawbow

  • Hero Member
  • *****
  • Posts: 911
  • West Tennessee/ Southern Illinois
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #9 on: August 22, 2016, 05:19:52 PM »
Rolf, I could send 2 bolts, grade 5, for about $15.00 by USPS first class mail. It might take a couple weeks to get there. Pm me if you want me to send them.
Logged
As in life; it’s the journey, not the destination. How you get there matters most.

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #10 on: August 22, 2016, 06:24:07 PM »
Quote from: okawbow on August 22, 2016, 05:19:52 PM
Rolf, I could send 2 bolts, grade 5, for about $15.00 by USPS first class mail. It might take a couple weeks to get there. Pm me if you want me to send them.
Thank you. I've sendt you a pm.

Best regards
Rolf
Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Help, I need a 3/4-16 tap bolt, at least 2" long for a breech plug.
« Reply #11 on: August 22, 2016, 06:38:01 PM »
Quote from: tim crowe on August 22, 2016, 05:13:59 PM
Rolf, for the cost of shipping might as well buy 2 bolts? Then you have a spare.
 Cheers
 Tim
Problem solved. A ALR member will send me the bolts. I am very thankful for all the help thats been kindly given by ALR members over the years.
Below is copy of the answer I got from Mc Master-Carr. Trying to buy from the USA can be quite trying at times. Getting the simplest items can be a head ache.
Best regards
Rolf
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
"Hi Rolf,
We cancelled the order you placed on our website.  Thank you for considering McMaster-Carr for your purchase, but due to the cost of complying with extensive US export regulations, McMaster-Carr accepts international purchases only from our established international customers.
We did not bill your credit card.
 
Mike"
Logged
Pages: [1]   Go Up
« previous next »