Author Topic: barrel profile?  (Read 4645 times)

Offline yip

  • Hero Member
  • *****
  • Posts: 1032
barrel profile?
« on: October 16, 2016, 11:51:08 PM »
 i'm planning on building a 54cal with a swamped barrel and wondering on a good profile for a somewhat lite rifle,any suggestions?

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5314
  • My passion is longrifles!
    • martialartsusa.com
Re: barrel profile?
« Reply #1 on: October 17, 2016, 12:40:46 AM »
For a .54 a "C" weight, I believe, is about the lightest you can get; that will be very light is available.  A "D" weight is often recommended and would be just a little heavier.
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline FALout

  • Hero Member
  • *****
  • Posts: 875
Re: barrel profile?
« Reply #2 on: October 17, 2016, 01:39:18 AM »
I just recently bought a Chambers Issac Haines kit in 54cal, seems pretty light with that c profile Rice barrel.
Bob

Offline volatpluvia

  • Sr. Member
  • ****
  • Posts: 456
  • Doing mission work in sunny south, Mexico
Re: barrel profile?
« Reply #3 on: October 17, 2016, 02:15:08 AM »
A .54 in 'c' weight will handle and carry really nice.  There will be some bsrrel whip off the bench, though.  Shouldering it for offhand shots will be a shear joy.
I believe, therefore I speak.  Apostle Paul.

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7683
Re: barrel profile?
« Reply #4 on: October 17, 2016, 02:26:31 AM »
There are at least two C weight barrels, a 38" and a 44" in Chambers Lancaster style kits. Both balance well for me but the 38" is a little lighter and handier in the woods.

Offline Mike C

  • Jr. Member
  • **
  • Posts: 76
Re: barrel profile?
« Reply #5 on: October 17, 2016, 02:55:01 AM »
I built a John Schreit around a C-weight Rice transition profile (38") in .54 with a rather heavy butt piece. It weighs 8.4 lbs and balances about 3" forward of the lock. Very handy in the woods.
Mike C
"Better to remain silent and be thought a fool than to speak and remove all doubt."  A. Lincoln

Offline Joey R

  • Hero Member
  • *****
  • Posts: 687
Re: barrel profile?
« Reply #6 on: October 17, 2016, 02:58:40 AM »
Hey MikeC, you ever win a match with it? ;D
Joey.....Don’t ever ever ever give up! Winston Churchill

Offline Osprey

  • Hero Member
  • *****
  • Posts: 1337
  • Roaming Delmarva...
Re: barrel profile?
« Reply #7 on: October 17, 2016, 03:36:30 AM »
If you want light, C weight in an Oct/Round swamped profile.  That round front section really shaves weight and makes a nice carrying gun for hunting. 
"Any gun built is incomplete until it takes game!"

Offline Darkhorse

  • Hero Member
  • *****
  • Posts: 1658
Re: barrel profile?
« Reply #8 on: October 17, 2016, 07:21:54 AM »
I built a rifle with a C weight .54 cal. 38" Colrane barrel some 15 years ago. It gets a lot of use as it's my main deer rifle. The rifle is well balanced and fairly light. I do all my load testing off the bench and I've never noticed any barrel whip off a bench or otherwise. I wouldn't know how to recognize barrel whip in a barrel this stout anyway. It's just a good handling, good shooting barrel and will cut one big hole when I do my part. You could build a poor boy with this barrel and it would be even lighter.
American horses of Arabian descent.

Offline yip

  • Hero Member
  • *****
  • Posts: 1032
Re: barrel profile?
« Reply #9 on: October 17, 2016, 03:41:51 PM »
thanks guys, C it is..............yip

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5277
  • Tennessee
Re: barrel profile?
« Reply #10 on: October 17, 2016, 03:43:24 PM »
thanks guys, C it is..............yip

My deer rifle is C- 54x42 and is plenty doggone accurate.  I don't care about harmonicas, just powder it up until it shoots.  ;D
Hold to the Wind

pushboater

  • Guest
Re: barrel profile?
« Reply #11 on: October 17, 2016, 04:35:32 PM »
I have a Chambers .54 Early Lancaster with a 44" barrel and it's more accurate than I am and balances beautifully.

Capt. David

Offline Mike C

  • Jr. Member
  • **
  • Posts: 76
Re: barrel profile?
« Reply #12 on: October 17, 2016, 04:45:29 PM »
Yes, Joey R, but when I do lady luck is always present.
Mike C
"Better to remain silent and be thought a fool than to speak and remove all doubt."  A. Lincoln

Offline sqrldog

  • Hero Member
  • *****
  • Posts: 985
Re: barrel profile?
« Reply #13 on: October 17, 2016, 06:09:48 PM »
Rice barrels builds what it calls a J. P. Beck that is a nce lightweight barrel it is available in .54.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15096
Re: barrel profile?
« Reply #14 on: October 17, 2016, 09:41:51 PM »
Taylor's Virginia with a C weight RICE .50 is perfect weight and hold for an offhand rifle.  A "C" in .54 would be as light for a hunting rifle in a swamped barrel as I'd like.  A "D" would make a better trail walk rifle. imho, of course.
Daryl

"a gun without hammers is like a spaniel without ears" King George V