« previous next »
Pages: [1] 2 3   Go Down

Author Topic: Building a Norwegian Style Box Barrel Flintlock Rifle  (Read 29668 times)

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Building a Norwegian Style Box Barrel Flintlock Rifle
« on: October 22, 2016, 06:39:36 PM »
Hi Guys!
Back to a litle gunbuilding, starting swamping and taper the box on my Charles Burton made barrel, rifled on my Iowa Bench see herehttp://americanlongrifles.org/forum/index.php?topic=30643.0
Use my old mill, and cleane up with a good big mill file ;)Next will be to file ornaments? in front of the square and mill stripes we see.
Runar

















Lots of steel chips ;)


« Last Edit: March 12, 2022, 07:19:39 PM by Tim Crosby »
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #1 on: October 22, 2016, 07:20:42 PM »
Runastav:  Nice to see you into a new project.

I really like those auto body files for removing steel fast from a barrel.  Some folks call them "Vixen" files...suppose that might be a brand name?  But they cut fast and leave a nice smooth surface.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #2 on: October 22, 2016, 08:10:28 PM »
Taylor calls his 'body file' "JAWS".  It actually takes off curls of steel - I have one as well, however I lack the requisite skill required to use it to good effect.

Interesting project, runastav.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #3 on: October 22, 2016, 09:48:52 PM »
I think Vixen was a name. I have one in good condition that's bigger than this one.

Bob Roller
Logged

Offline tim crowe

  • Full Member
  • ***
  • Posts: 196
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #4 on: October 23, 2016, 06:25:35 PM »
Agreed ,when used for shaping barrels , a Vixen with that aggressive cutting tooth will remove furious amounts of metal.
That file, 6 hours and I have turned a round barrel, octagon. A good work out. :P
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #5 on: October 23, 2016, 07:06:41 PM »
Same here, Tim - when a MUCH younger man.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Chrisweiler

  • Guest
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #6 on: October 23, 2016, 08:29:00 PM »
Runar would you happen to have a picture of what a box barrel rifle looks like?
Logged

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1990
  • the other Joe S.
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #7 on: October 23, 2016, 08:32:01 PM »
looking forward to seeing this unfold
Logged

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #8 on: October 23, 2016, 08:47:18 PM »
Me too Joe
Logged

Offline Charlie B

  • Full Member
  • ***
  • Posts: 142
    • fcibarrels
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #9 on: October 23, 2016, 08:59:21 PM »
Yes please keep posting progress. I wondered all the time I was building this barrel what the final result would look like.
Logged
Charlie

Offline PPatch

  • Hero Member
  • *****
  • Posts: 2456
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #10 on: October 23, 2016, 09:47:08 PM »
Welcome back Runastav, good to see you posting another project! Looking forward to developments with your box barreled firearm (I have no clue what a "box barrel" is). That is some fine file work young man.

dave
Logged
Dave Parks   /   Quis custodiet ipsos custodes?

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #11 on: October 23, 2016, 10:16:09 PM »
Hi Guys and thank you all! Daryl the Elbow Greas was much chiper 30-40 years ago I think hehe ;)
If you google the Norwegian word  ( KASSEPIPE )  there is some photos of Box barrels Rifles :)
Runar
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #12 on: October 24, 2016, 12:21:43 AM »
Quote from: tim crowe on October 23, 2016, 06:25:35 PM
Agreed ,when used for shaping barrels , a Vixen with that aggressive cutting tooth will remove furious amounts of metal.
That file, 6 hours and I have turned a round barrel, octagon. A good work out. :P

Even thinking about using ANY kind of file to make a round barrel octagon has made me so tired I won't go to the shop
in the morning ;D

Bob Roller
Logged

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1990
  • the other Joe S.
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #13 on: October 24, 2016, 01:26:45 AM »
Quote from: Bob Roller on October 24, 2016, 12:21:43 AM
Quote from: tim crowe on October 23, 2016, 06:25:35 PM
Agreed ,when used for shaping barrels , a Vixen with that aggressive cutting tooth will remove furious amounts of metal.
That file, 6 hours and I have turned a round barrel, octagon. A good work out. :P

Even thinking about using ANY kind of file to make a round barrel octagon has made me so tired I won't go to the shop
in the morning ;D

Bob Roller
Amen to that ,my hands are hurting thinking about it
Logged

Offline tim crowe

  • Full Member
  • ***
  • Posts: 196
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #14 on: October 25, 2016, 02:01:29 AM »
Quote from: Bob Roller on October 24, 2016, 12:21:43 AM
Quote from: tim crowe on October 23, 2016, 06:25:35 PM
Agreed ,when used for shaping barrels , a Vixen with that aggressive cutting tooth will remove furious amounts of metal.
That file, 6 hours and I have turned a round barrel, octagon. A good work out. :P

Even thinking about using ANY kind of file to make a round barrel octagon has made me so tired I won't go to the shop
in the morning ;D

Bob Roller

You bet, my hands end up sore but doable!
Logged

Offline tim crowe

  • Full Member
  • ***
  • Posts: 196
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #15 on: October 25, 2016, 02:02:11 AM »
Quote from: Daryl on October 23, 2016, 07:06:41 PM
Same here, Tim - when a MUCH younger man.

 ;D ;D
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #16 on: October 25, 2016, 02:35:31 AM »
Quote from: runastav on October 23, 2016, 10:16:09 PM
Hi Guys and thank you all! Daryl the Elbow Greas was much chiper 30-40 years ago I think hehe ;)
If you google the Norwegian word  ( KASSEPIPE )  there is some photos of Box barrels Rifles :)
Runar

Yes - Runar - 30 to 40 years is about right! My first was in 1976 or 77 WOW- 39 and 40 years!  I do remember having blistered and bloody hands.  No handles on the files, except for duct-tape wraps. LOL - I still have one of those 'rasps' with some brown stained duct tape.

This is quite a project - well done.
« Last Edit: October 25, 2016, 02:36:16 AM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #17 on: October 25, 2016, 02:37:40 AM »



« Last Edit: December 21, 2020, 01:52:42 AM by rich pierce »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #18 on: October 25, 2016, 02:02:25 PM »
Quote from: tim crowe on October 25, 2016, 02:01:29 AM
Quote from: Bob Roller on October 24, 2016, 12:21:43 AM
Quote from: tim crowe on October 23, 2016, 06:25:35 PM
Agreed ,when used for shaping barrels , a Vixen with that aggressive cutting tooth will remove furious amounts of metal.
That file, 6 hours and I have turned a round barrel, octagon. A good work out. :P

Even thinking about using ANY kind of file to make a round barrel octagon has made me so tired I won't go to the shop
in the morning ;D

Bob Roller

You bet, my hands end up sore but doable!


I still have some of the big half round Multicut files left.These have 11 inches of sharp teeth
on the flat side and are 1-1/8" wide and have a good tang for a comfortable handle.
These are AMERICAN made,new old stock and are $40 each to any U.S address which includes
USPS and shipped in a reusable mailing tube. IF you can't organize your life without making a
round barrel into square or octagon then these files will help. Used as a draw file with light pressure
and a good threading fluid or cutting oil they will take a lot of effort out of draw filing a tough steel barrel.
My E mail is <bobroller@frontier.com> if you're interested.

Bob Roller
Logged

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #19 on: October 25, 2016, 03:55:27 PM »
Hi All and thank you!
This build will not be a copy of any original, but I will use several as inspirasjon. Most originals was either snaplock and flintlocks, but most is rebuild to percussion. Here is some more filings  :)
Runar





Ahh the big mill file










« Last Edit: December 21, 2020, 01:53:58 AM by rich pierce »
Logged

Offline Richard Snyder

  • Starting Member
  • *
  • Posts: 42
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #20 on: October 26, 2016, 02:03:50 PM »
Thank you for sharing your talent!
Logged

Offline conquerordie

  • Hero Member
  • *****
  • Posts: 528
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #21 on: October 26, 2016, 09:52:14 PM »
Runastav,

Incredible project. The architectural design of Norwegian firearms seem so different to me. Almost alien ( rectangle to swamped barrel). But also most interesting. Watching and learning as I always do when you start a project.
Greg
Logged

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #22 on: October 29, 2016, 08:02:50 PM »
Hi all, and thank you!
Some more filing and this barrel type have always some stripes in lenght think the old guys chisel them out but I do it simpel and use my handy dandy carbide wheel in the drill. as a gaid use a old big sawblade ;)
Runar











« Last Edit: December 21, 2020, 01:55:12 AM by rich pierce »
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #23 on: October 29, 2016, 10:16:27 PM »
Nice work!
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Building a Norwegian Style Box Barrel Flintlock Rifle
« Reply #24 on: October 29, 2016, 11:21:42 PM »
Amazing work, Runar...  Always look forward to your posts!


       Ed
Logged
Ed Wenger
Pages: [1] 2 3   Go Up
« previous next »