« previous next »
Pages: [1]   Go Down

Author Topic: Birdseye Maple gunstock wood?  (Read 2635 times)

Treebeard

  • Guest
Birdseye Maple gunstock wood?
« on: February 12, 2017, 02:15:30 AM »
A while back on gunbroker saw a little 28ga cap lock with Birdseye Maple stock. Looks like someone had restocked a cheap Spanish import with a beautiful piece of wood. Any contemporary makers using this type of wood? I usually only see it being used as furniture veneer.
Logged

Waddie J Paddock

  • Guest
Re: Birdseye Maple gunstock wood?
« Reply #1 on: February 12, 2017, 03:20:55 AM »
Treebeard,  although I am not a longtime builder, I did carve my first rifle out of a birds eye slab.  Turned out to be a nice choice for my Vincent.
« Last Edit: February 15, 2017, 08:08:13 PM by Waddie J Paddock »
Logged

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Birdseye Maple gunstock wood?
« Reply #2 on: February 12, 2017, 06:41:23 AM »
Bill Brockway used it on a rifle.  Beautiful wood, but the most "contrary and hardest to carve" of any he used.
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline L. Akers

  • Hero Member
  • *****
  • Posts: 509
Re: Birdseye Maple gunstock wood?
« Reply #3 on: February 12, 2017, 06:53:55 AM »
I made a Tenn. style rifle with birdseye back in the 80's for a customer in England.  I don't remember it any more contrary than any other highly figured piece of maple.
Logged

Treebeard

  • Guest
Re: Birdseye Maple gunstock wood?
« Reply #4 on: February 12, 2017, 07:30:42 AM »
Thanks for the several replies. It would be great if any one has pictures! When I was working as a gun smith I saw a couple modern bolt actions with Birdseye stocks that I thought looked pretty good but nothing beats the beauty of a well made flintlock longrifle.
Logged

Offline Waksupi

  • Sr. Member
  • ****
  • Posts: 358
  • Ric Carter, Somers, Montana
Re: Birdseye Maple gunstock wood?
« Reply #5 on: February 12, 2017, 06:52:03 PM »
I used it for the back of a violin I built years ago. Pretty when done, but the little eyes can "pop" out when being worked if you aren't careful. Approach the finished surface carefully when working.
Logged
Ric Carter
Somers, Montana
Pages: [1]   Go Up
« previous next »