« previous next »
Pages: [1]   Go Down

Author Topic: Runastava needs parts for a Hawken pistol.  (Read 5164 times)

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Runastava needs parts for a Hawken pistol.
« on: March 18, 2017, 10:50:13 AM »
 Hope you guys can help Runarstava.

He put in a backorder With TOTW  for :
1 LOCK-HP 494895 Lock, Hawken pistol, percussion, by R. E. Davis Company, $105.00 11/05/2014
1 PLUG-HP-15-5 494895 Breechplug & tang $40.99 11/05/2014

He's waited 2 years, and still no part?  Any suggeustions where he can find them?

Best regards
Rolf
Logged

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1990
  • the other Joe S.
Re: Runastava needs parts for a Hawken pistol.
« Reply #1 on: March 18, 2017, 02:06:27 PM »
Wow,two years!and folks are crying waiting a couple months for some parts ???
Logged

Offline little joe

  • Hero Member
  • *****
  • Posts: 685
Re: Runastava needs parts for a Hawken pistol.
« Reply #2 on: March 18, 2017, 02:24:20 PM »
He should contact TOW and see what the problem is. Our suppliers can only deliver as fast as there suppliers can fill there  orders. Quality parts are not made in China and a lot of our suppliers are 1-2 ma operations.
Logged

Whaleman

  • Guest
Re: Runastava needs parts for a Hawken pistol.
« Reply #3 on: March 18, 2017, 03:25:40 PM »
I have been waiting for a years for the same plug. Different supplier. I am told the man who makes these is moving his factory and it will be a while until the supply comes back. Dan
Logged

Offline Don Stith

  • Hero Member
  • *****
  • Posts: 2815
Re: Runastava needs parts for a Hawken pistol.
« Reply #4 on: March 18, 2017, 11:56:11 PM »
Who and where is Runastava
Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Runastava needs parts for a Hawken pistol.
« Reply #5 on: March 19, 2017, 01:25:33 AM »
Logged

Offline Don Stith

  • Hero Member
  • *****
  • Posts: 2815
Re: Runastava needs parts for a Hawken pistol.
« Reply #6 on: March 19, 2017, 01:39:55 AM »
Thank you
 He shows some nice work.  As far as I know the maker of that breech is not back in business yet.
Logged

Offline flinchrocket

  • Hero Member
  • *****
  • Posts: 1750
Re: Runastava needs parts for a Hawken pistol.
« Reply #7 on: March 19, 2017, 02:14:09 AM »
Might try an ad in the Items for sale/wanted section. Maybe someone has them laying around and not going to use them.
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9689
Re: Runastava needs parts for a Hawken pistol.
« Reply #8 on: March 19, 2017, 07:44:55 PM »
Quote from: Rolf on March 18, 2017, 10:50:13 AM
Hope you guys can help Runarstava.

He put in a backorder With TOTW  for :
1 LOCK-HP 494895 Lock, Hawken pistol, percussion, by R. E. Davis Company, $105.00 11/05/2014
1 PLUG-HP-15-5 494895 Breechplug & tang $40.99 11/05/2014

He's waited 2 years, and still no part?  Any suggeustions where he can find them?

Best regards
Rolf

Here's an idea.TOW's catalog says they have all the replacement parts needed
to fix one of these locks. Buy one of each and make up a lock and then either make
or try to find a breech. I have plate patterns for this lock but no desire to make it
again.

Bob Roller
Logged

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Runastava needs parts for a Hawken pistol.
« Reply #9 on: March 19, 2017, 10:16:43 PM »
Hi Guys! And thank you all!
Here is my parts so far from TOTW, Bob Roller that is a wery good idea ;)Think I go for it
Runar
Logged

Offline Keb

  • Hero Member
  • *****
  • Posts: 1193
  • south Ohio
Re: Runastava needs parts for a Hawken pistol.
« Reply #10 on: March 20, 2017, 01:18:13 AM »
What is the width of the barrel?
Logged

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2260
  • Oklahoma
Re: Runastava needs parts for a Hawken pistol.
« Reply #11 on: March 20, 2017, 03:32:45 AM »
Here is what you need.
http://www.muzzleloaderbuilderssupply.com/mbs3cart/agora.cgi?cart_id=4863659.23392&next=25&product=Breechplugs  24280 - 5/8-18, Snail Plug & Tang Set For 15/16” Barrels
http://www.muzzleloaderbuilderssupply.com/mbs3cart/agora.cgi?cart_id=4863659.23392&product=Locks&user4=L%26R Percussion  25730 - L&R Hawken WARRANTED Percussion Lock

I have that lock and it fits real close with that same drawing and the stock blank.
Logged
Psalms 144

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Runastava needs parts for a Hawken pistol.
« Reply #12 on: March 21, 2017, 09:44:45 PM »
Hi all, Keb it is 15/16"  and Clark B I see on your webside (Sorry no international orders)And Bob, TOTW was out of stock  in hawken Lock parts :(
In photo you see a very very nice pistol Mike Nesbitt is writing in Muzzleloader July/August 2015 made by Ted Fellowes. So I like to make one ala this maby a Hawken/Mounten gun  and use a Coulcher lock same as on my Leman.
Runar
Logged

Offline TMerkley

  • Hero Member
  • *****
  • Posts: 634
Re: Runastava needs parts for a Hawken pistol.
« Reply #13 on: March 21, 2017, 10:07:21 PM »
Are there (Specs) out there?  He is a machinist, but, I'd hate for him to have to make his own parts. Again....
Logged

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2260
  • Oklahoma
Re: Runastava needs parts for a Hawken pistol.
« Reply #14 on: March 22, 2017, 02:26:57 AM »
Runar, I'm sorry. I didn't know that MLBS did not ship international orders. Is there anyone that could help you get the parts you need?
Logged
Psalms 144

Offline elk killer

  • Hero Member
  • *****
  • Posts: 1514
Re: Runastava needs parts for a Hawken pistol.
« Reply #15 on: March 23, 2017, 12:14:04 AM »
call MLBS. I'm pretty sure they will ship to you.
Logged
only flintlocks remain interesting..
Pages: [1]   Go Up
« previous next »