« previous next »
Pages: [1]   Go Down

Author Topic: Water marks  (Read 5901 times)

long carabine

  • Guest
Water marks
« on: April 28, 2009, 07:32:09 PM »
 Cleanong my rifle Sunday i accidently got 2 or 3 water marks on my rifle. I tried to clean them off but they will not come all the way out. What can I use to get them off. Tim
Logged

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: Water marks
« Reply #1 on: April 28, 2009, 07:59:30 PM »
What kind of finish is it?
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

long carabine

  • Guest
Re: Water marks
« Reply #2 on: April 29, 2009, 02:28:09 AM »
I'm not really sure what finish is on it but it is carly maple stained dark.
Logged

Offline Roger Fisher

  • Hero Member
  • *****
  • Posts: 6805
Re: Water marks
« Reply #3 on: April 29, 2009, 03:34:14 AM »
Not making light of your question and assuming she is not a 5,000 dollar rifle nor a collector's item; but one you intend to 'use', rub aliitle oil on her and go on down the road consider it patina.  She will get a lot more 'marks' on her til your done with her! :)
Logged

long carabine

  • Guest
Re: Water marks
« Reply #4 on: April 29, 2009, 04:23:32 AM »
 That is a option Roger. The marks give Betty ( the rifles name) character. lol Tim
Logged

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Water marks
« Reply #5 on: April 29, 2009, 07:22:50 AM »
Quote from: long carabine on April 28, 2009, 07:32:09 PM
Cleanong my rifle Sunday i accidently got 2 or 3 water marks on my rifle. I tried to clean them off but they will not come all the way out. What can I use to get them off. Tim

If its linseed oil and its taken on a gray or white appearance it will go away on its own in most cases as the finish gives the water back the the atmosphere and a little oil in a 2-3 days will make it invisible.
The Grumbacher's/boiled linseed oil finish I have been using for a top finish does not seem to water spot.

Now if you have some strong soap/detergent in the stuff you got on the finish it can require a little work fix as it may eat into the oil. I found Simple Green to be very hard on finishes, only tried it once.
If you have problems with this give it a few days after getting it back to normal then wipe on a *thin* coat of Homer Formbey's low gloss Tung Oil, I think Wally World has it in plastic bottles. Its really thin but its not too bad for water proofing. Wipe on pretty wet and wipe back off in a minute or so.
Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: Water marks
« Reply #6 on: April 29, 2009, 08:10:37 AM »
That's one of the good things about a real linseed oil or oil varnish.  If it does get water spots, they'll dry up and go away.

Warm the stock with a hair dryer (don't get it too hot) and rub on some wax.  Can't hurt, and might help...
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Water marks
« Reply #7 on: April 29, 2009, 01:14:45 PM »
When cleaning my shooter for the first time, I inadvertently allowed water to run out the touchhole and over the wrist, down the comb. The water was also black with fouling, which stained the wood. It never came off, but now I don't see it anymore for all the oxydation and discoloration of wood and metal. Some people (who don't know Kentuckies very well) think my gun is an original.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Ionian

  • Guest
Re: Water marks
« Reply #8 on: April 29, 2009, 03:34:36 PM »
If it's a white water stain, use a heat gun. We use it on antique furniture all the time and it removes those ugly rings from glasses with ease.
Logged

keweenaw

  • Guest
Re: Water marks
« Reply #9 on: April 29, 2009, 04:01:17 PM »
Acer is correct about that diluted crud out of the touch hole - It must be that the sulfur compounds in the fouling oxidize the stains, never to go away.

Tom
Logged

Dave K

  • Guest
Re: Water marks
« Reply #10 on: April 29, 2009, 08:49:49 PM »
If it is a varnish, rub it with good old Maynaise(sp?). I have seen many water stained objects like kitchen cabnets "repaired" with this and I have used it myself.
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Water marks
« Reply #11 on: April 29, 2009, 09:43:50 PM »
Quote from: Roger Fisher on April 29, 2009, 03:34:14 AM
consider it patina.  She will get a lot more 'marks' on her til your done with her! :)
I agree with Roger, "it's called patina".  In all seriousness, I am enjoying the "how to" responses.  Lots of good info.
DMR
Logged
Pages: [1]   Go Up
« previous next »