« previous next »
Pages: [1]   Go Down

Author Topic: Want Info on My Rifle  (Read 4512 times)

oldgunsmith

  • Guest
Want Info on My Rifle
« on: September 06, 2017, 06:32:30 PM »
 I have  an old one. The barrel is 42" ,cal. 40. Full stock, striped maple, very plain. No ornamentation, no patchbox, all iron furniture, double set triggers. Toe plate and butt plate are staked in place. Weighs close to 13 pounds. It has two fore-end caps, first is iron sheet metal and the second joins the first like it was "poured" in place and appears to be pewter. On the top flat, between the rear sight and breech plug it is stamped J, McKee. Have been told he was from Mecklenburg County, NC.

Any info you guys have would be great.

John
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Want Info on My Rifle
« Reply #1 on: September 06, 2017, 07:11:56 PM »
Only way to tell for sure is with pictures.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

oldgunsmith

  • Guest
Re: Want Info on My Rifle
« Reply #2 on: September 06, 2017, 07:16:31 PM »
will have to figure out how to post them here
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: Want Info on My Rifle
« Reply #3 on: September 06, 2017, 08:02:16 PM »
Quote from: oldgunsmith on September 06, 2017, 07:16:31 PM
will have to figure out how to post them here

This will tell you how....  http://americanlongrifles.org/forum/index.php?topic=43575.0

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline mbriggs

  • member 2
  • Hero Member
  • ****
  • Posts: 559
Re: Want Info on My Rifle
« Reply #4 on: September 06, 2017, 08:58:11 PM »
McKee trained under Zenas Alexander in Mecklenburg County.  He then moved to Buncombe County where  he made Appachlian School rifles.

Michael
Logged
C. Michael Briggs

oldgunsmith

  • Guest
Re: Want Info on My Rifle
« Reply #5 on: September 06, 2017, 11:51:50 PM »
Am sending a few photos:









Logged

oldgunsmith

  • Guest
Re: Want Info on My Rifle
« Reply #6 on: September 06, 2017, 11:55:59 PM »
a few more:












host gif online
Logged

oldgunsmith

  • Guest
Re: Want Info on My Rifle
« Reply #7 on: September 06, 2017, 11:57:38 PM »
last batch:



Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Want Info on My Rifle
« Reply #8 on: September 07, 2017, 03:47:57 PM »
Looks like that gun has had a longer McKee marked barrel placed in the stock, I believe the original barrel was a bit shorter. I think that's why it has the extra added on pewter nose cap.  I don't know enough about McKee's work in the mountains to know if the stock is McKee's work or not, Mike Briggs could probably tell you.
It's a very attractive Mt rifle.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

n stephenson

  • Guest
Re: Want Info on My Rifle
« Reply #9 on: September 07, 2017, 07:25:05 PM »
Cool Rifle!!  Do you have any idea where it came from, provenance?  I really like the mounts , nicely made! . Nice Find!  Thanks for showing it.   Nate
Logged

oldgunsmith

  • Guest
Re: Want Info on My Rifle
« Reply #10 on: September 07, 2017, 08:05:07 PM »
Mike --  I believe the stock and barrel have always been as they are now. This is truly a poor man's rifle. The only part of the barrel that is octagon is the part that shows. The bottom of the barrel (which still shows the hammer forging) is round.

Nate ----  I have no written provenance on this rifle. I purchased it from an estate about 20 years ago. Have had it in a museum in Mason County, Texas. This county is noted for the Hoo Doo War which was essentially a feud between the Anglos and the German settlers. Most of the Anglos involved were from Mecklenburg County, N C. Found it very interesting that this old rilfe would also turn up here from a descendant of the locals.

I have always wondered about the lock. Any info ?? Could it be a flintlock changed to percussion ??

John
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: Want Info on My Rifle
« Reply #11 on: September 07, 2017, 08:14:10 PM »
The lock looks like it was always percussion.

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline jcmcclure

  • Sr. Member
  • ****
  • Posts: 423
Re: Want Info on My Rifle
« Reply #12 on: September 08, 2017, 01:29:39 AM »
Quote from: Mike Brooks on September 07, 2017, 03:47:57 PM
Looks like that gun has had a longer McKee marked barrel placed in the stock, I believe the original barrel was a bit shorter. I think that's why it has the extra added on pewter nose cap.  I don't know enough about McKee's work in the mountains to know if the stock is McKee's work or not, Mike Briggs could probably tell you.
It's a very attractive Mt rifle.

I am with Mike on this one....that stock had a shorter barrel.
Logged
Pages: [1]   Go Up
« previous next »