Author Topic: North Carolina Style Rifle  (Read 8996 times)

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
North Carolina Style Rifle
« on: November 08, 2017, 04:50:09 AM »
Recently off the bench is this 50 caliber North Carolina style rifle. Barrel is custom profiled by Jim carpenter and is 42" long. Lock is a chambers Late Ketland and wood is sugar maple. the mounts are all hand forged except for the rear sight. Thought you folks might like to have a look before I put it up for sale. Comments welcome.



















top free photo hosting sites





Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: North Carolina Style Rifle
« Reply #1 on: November 08, 2017, 05:33:37 AM »
I like that gun and if Jim Carpenter made the barrel it will be a shooter too.

Offline moleeyes36

  • Hero Member
  • *****
  • Posts: 1443
Re: North Carolina Style Rifle
« Reply #2 on: November 08, 2017, 06:30:51 AM »
Very handsome rifle.

Mole Eyes
Don Richards
NMLRA Field Rep, Instructor, Field Range Officer
NRA Chief Range Safety Officer

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19525
Re: North Carolina Style Rifle
« Reply #3 on: November 08, 2017, 06:32:16 AM »
They must have made some handsome rifles in North Carolina back in the day.
Andover, Vermont

Offline Justin Urbantas

  • Hero Member
  • *****
  • Posts: 1395
Re: North Carolina Style Rifle
« Reply #4 on: November 08, 2017, 07:33:04 AM »
looks nice Jim. Interesting fat front sight.

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2088
Re: North Carolina Style Rifle
« Reply #5 on: November 08, 2017, 12:40:10 PM »
I like it. LOTS ;D
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline gusd

  • Sr. Member
  • ****
  • Posts: 303
Re: North Carolina Style Rifle
« Reply #6 on: November 08, 2017, 05:59:41 PM »
Very nice!!
Gus

Offline Justin

  • Full Member
  • ***
  • Posts: 182
Re: North Carolina Style Rifle
« Reply #7 on: November 08, 2017, 06:08:59 PM »
Looks nice!

Question for you... This is probably dependent on the style of rifle but I noticed your patch box end is just wood. I've seen some folks cut brass to fit the end of the patch box to "match" the butt plate.

Is there a reason for doing that (or not)?

n stephenson

  • Guest
Re: North Carolina Style Rifle
« Reply #8 on: November 08, 2017, 06:17:56 PM »
Jim, I always enjoy seeing your work! Nice clean lines , great architecture, nice color and finish. Another nice job!   Nate

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: North Carolina Style Rifle
« Reply #9 on: November 08, 2017, 07:51:54 PM »
Now that's a rifle I could fall in love with ;)! Very nice lines and well done 8) :).
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: North Carolina Style Rifle
« Reply #10 on: November 08, 2017, 08:45:49 PM »
 Jim very nice rifle. Simple lines an very graceful. Oldtravler

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: North Carolina Style Rifle
« Reply #11 on: November 08, 2017, 09:43:25 PM »
Very neatly made rifle.
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: North Carolina Style Rifle
« Reply #12 on: November 08, 2017, 09:52:20 PM »
A masterful job for sure.  Beautiful!
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
Re: North Carolina Style Rifle
« Reply #13 on: November 09, 2017, 01:23:05 AM »
 Thanks for the kind comments .
Justin , the photo of the front sight appears wider than it actually is . It is .100 in the real world . The lack of a metal cap on the rear of the patch box is because the few originals I have observed did not have one . I believe it is a earlier Northern thing . Beside that , they are pretty much a pain to fit and get to look just right .

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: North Carolina Style Rifle
« Reply #14 on: November 09, 2017, 02:44:11 AM »
Nice job. I have always liked those side swinger boxes.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline M. E. Pering

  • Sr. Member
  • ****
  • Posts: 273
Re: North Carolina Style Rifle
« Reply #15 on: November 09, 2017, 06:13:14 AM »
Very nice transition from buttstock to wrist.  Long patch box and nose cap.  Clean lines in a classic Southern style.  Simple, beautiful rifle with beautiful wood.

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: North Carolina Style Rifle
« Reply #16 on: November 09, 2017, 10:51:18 PM »
I really like that rifle.  The architecture looks right out of the Deep River area of NC, which is to say, slim and elegant. 

I really like the deep, rich color you attained.  You must be please. 

I also appreciate the crisp wood work on the cheek piece. 

All in all a rifle to be envied.  My only constructive comment is that it would take me 10 minutes to stain that ramrod.  :-)  That is simply my taste. 

Best wishes, and God Bless,  Marc

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: North Carolina Style Rifle
« Reply #17 on: November 09, 2017, 10:54:41 PM »
Foe those interested in the historical aspect of that patch box it was found exclusively in the Bear Creek/Deep River area of NC. They are actually pretty clever.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Joe Schell

  • Full Member
  • ***
  • Posts: 208
Re: North Carolina Style Rifle
« Reply #18 on: November 10, 2017, 02:35:18 AM »
nice Work , Jim. I really like those NC rifles

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4473
    • Personal Website
Re: North Carolina Style Rifle
« Reply #19 on: November 10, 2017, 10:49:08 PM »
I like it.  Nice careful work for sure.

Jim

Offline EC121

  • Hero Member
  • *****
  • Posts: 1611
Re: North Carolina Style Rifle
« Reply #20 on: November 10, 2017, 11:09:57 PM »
What Mike said.  Mr. Ivey's book attributes the swiveling patchbox to Randoph and Guilford counties in NC.
Brice Stultz

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
Re: North Carolina Style Rifle
« Reply #21 on: November 10, 2017, 11:51:01 PM »
Mike & EC , Thank's for the insight into the origin of the patch box lid . Previously , I only knew that I thought they were kind of neat .

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: North Carolina Style Rifle
« Reply #22 on: November 11, 2017, 03:33:32 AM »
How does it shoot?

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: North Carolina Style Rifle
« Reply #23 on: November 11, 2017, 06:26:27 AM »
Most appealing rifle, sweet and petite!  ;D

Curtis
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
Re: North Carolina Style Rifle
« Reply #24 on: November 11, 2017, 06:56:18 AM »
Like the architecture and styling.