« previous next »
Pages: 1 [2] 3 4   Go Down

Author Topic: Work in progress FINITO!  (Read 19140 times)

Offline Don Stith

  • Hero Member
  • *****
  • Posts: 2815
Re: Work in progress
« Reply #25 on: December 28, 2017, 12:44:12 AM »
Where did the pictures go?  I saw them this morning
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #26 on: December 28, 2017, 12:45:13 AM »
Quote from: oldtravler61 on December 27, 2017, 11:23:33 PM
  Mike your flash on your camera looks like the nose cap is flat sided...Which we all know it isn't. Coming along very nice...May I ask which number this is?  How close are you to the magic 400? 😀
I believe this is 358. Only did 4 guns for 2017.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline iloco

  • Hero Member
  • *****
  • Posts: 1029
  • Old Timer, Chilhowie, Va.
Re: Work in progress
« Reply #27 on: December 28, 2017, 01:01:24 AM »
Quote from: Don Stith on December 28, 2017, 12:44:12 AM
Where did the pictures go?  I saw them this morning
  I can see the pictures.
Quote from: Mike Brooks on December 28, 2017, 12:45:13 AM
Quote from: oldtravler61 on December 27, 2017, 11:23:33 PM
  Mike your flash on your camera looks like the nose cap is flat sided...Which we all know it isn't. Coming along very nice...May I ask which number this is?  How close are you to the magic 400? 😀
I believe this is 358. Only did 4 guns for 2017.
I have #330 a 20 gauge fowler. Very light and nimble gun.
Logged
iloco

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2915
Re: Work in progress
« Reply #28 on: December 28, 2017, 01:10:53 AM »
I’m going to have to get the book out and see some of Eagles’ wire inlay work now.
Logged
Stop Marxism in America

Offline markwi

  • Jr. Member
  • **
  • Posts: 85
Re: Work in progress
« Reply #29 on: December 28, 2017, 01:30:21 AM »
no pictures, Mark
Logged

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Work in progress
« Reply #30 on: December 28, 2017, 04:17:20 AM »
  Maybe Mike is retaking them? But if I was Mike I'd seriously consider keeping this one. It's going to be a dandy....!
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #31 on: December 28, 2017, 04:41:07 AM »
Pics come up for me. Eagle's wire inlay is just a few simple straight accent lines, no big deal. No chance I'll be able to keep this one, but I'd like to build one for myself one day!
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline flinchrocket

  • Hero Member
  • *****
  • Posts: 1750
Re: Work in progress
« Reply #32 on: December 28, 2017, 04:55:27 AM »
They were gone for a while but now there back. Nice lookin rifle by the way.
Logged

Offline John SMOthermon

  • Hero Member
  • *****
  • Posts: 538
  • John SMOthermon
Re: Work in progress
« Reply #33 on: December 28, 2017, 05:20:00 AM »
I can't see the pics either....

But it's good to see you back at it Mike.

How the shoulder holding up?

Mine's still not 100%.
Logged
Smo

Good Luck & Good Shootin'

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Work in progress
« Reply #34 on: December 28, 2017, 05:58:32 AM »
Neat project Mike, looking forward to seeing it finished!  Glad to see the progress pics.

Curtis
« Last Edit: December 29, 2017, 06:16:39 AM by Curtis »
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3469
Re: Work in progress
« Reply #35 on: December 28, 2017, 06:21:18 AM »
Very high -end clean work Mike.  Just the sort of thing I'd expect of you!
Going to be a fantastic rifle when finished.  I look forward to seeing  it completed!!

Tore tendon in my shoulder. Knew I had. went to see doc. she sent me for ultrasound. took 6 months.  Told me what I'd done. Told them I Knew that when I did it! (Popeye effect) sent to specialist.  Asked me why I didn't come see him right away. Could take a year now to not get right. Never had any treatment on it as I'm on my own on farm most of time and can't be having a wing taped up ...
Logged

ltdann

  • Guest
Re: Work in progress
« Reply #36 on: December 28, 2017, 05:17:51 PM »
Those finials on the pipes just amaze me.  Just solder a sheet of silver on?  That's it?
Logged

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3163
  • James Rogers
    • Fowling Piece
Re: Work in progress
« Reply #37 on: December 28, 2017, 05:56:15 PM »
Now that I can finally see the pictures all I can say is wow!!
Looking forward to the end result on that one Mike!
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #38 on: December 28, 2017, 06:02:29 PM »
Quote from: ltdann on December 28, 2017, 05:17:51 PM
Those finials on the pipes just amaze me.  Just solder a sheet of silver on?  That's it?
I filed a groove into the pipe to solder the silver into then filed the silver to shape.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Osprey

  • Hero Member
  • *****
  • Posts: 1355
  • Roaming Delmarva...
Re: Work in progress
« Reply #39 on: December 28, 2017, 06:12:39 PM »
I like it, can't wait to see it done!

But hold on a sec, isn't it the late muzzleloader deer season out there for you Iowegians??  What are you doing inside?!?!   :o
Logged
"Any gun built is incomplete until it takes game!"

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Work in progress
« Reply #40 on: December 28, 2017, 06:57:49 PM »
 no pics showing here. Really want to see the finished gun...
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #41 on: December 28, 2017, 07:05:32 PM »
Quote from: Osprey on December 28, 2017, 06:12:39 PM
I like it, can't wait to see it done!

But hold on a sec, isn't it the late muzzleloader deer season out there for you Iowegians??  What are you doing inside?!?!   :o
I had early muzzleloader. Spent the entire season in a tractor hauling corn. Never even loaded my gun. No big deal, I have deer still in the freezer form last year.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #42 on: December 28, 2017, 07:06:44 PM »
Quote from: oldtravler61 on December 28, 2017, 06:57:49 PM
no pics showing here. Really want to see the finished gun...
I still see pics. You'll have to wait a bit before I can get that gun finished.....I'm not as speedy as I once was!
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Work in progress
« Reply #43 on: December 28, 2017, 07:25:57 PM »
Pics are there on my screen....
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Work in progress
« Reply #44 on: December 29, 2017, 12:13:18 AM »
  Mike's got Aliens hiding them....! Get everyone else's picture's...weird...!
Logged

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1990
  • the other Joe S.
Re: Work in progress
« Reply #45 on: December 29, 2017, 12:23:52 AM »
Looks like that's going to be a fine looking gun Mike.You mention it was hard for you to make the adjustment from early to late period.Was the difference that much,size,what are some of the biggest differences?
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #46 on: December 29, 2017, 12:52:38 AM »
Quote from: Joe S. on December 29, 2017, 12:23:52 AM
Looks like that's going to be a fine looking gun Mike.You mention it was hard for you to make the adjustment from early to late period.Was the difference that much,size,what are some of the biggest differences?
Yes, in part. The breech is only 7/8" yet the wrist is 1 5/8" tall. I don't even leave a wrist that tall on a gun with an 1 1/8" breech. I haven't built a gun with less than a 1" breech in probably decades. Than you add in a 1 3/8" buttplate and a 1 1/4" wrist width and I was in uncharted territory! It's been fun to build, just a bit of head scratching from time to time.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Work in progress
« Reply #47 on: December 29, 2017, 06:04:56 AM »
Late to the party, looking great, Mike.  When I first looked at the photos, I was drawn to the wrist area, and thought how "right" that whole area looked.  I was relieved when I read how you were in somewhat uncharted waters..., those tall wrists are a real challenge for me.  Looking forward to seeing the finished piece.


           Ed
Logged
Ed Wenger

Offline tiswell

  • Full Member
  • ***
  • Posts: 152
Re: Work in progress
« Reply #48 on: January 01, 2018, 02:21:26 AM »
Mike,
   Great looking rifle!  Can you tell me where can one find any info on L.Nash?

                                                                                                                                                       Thanks, Bill
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Work in progress
« Reply #49 on: January 01, 2018, 04:07:32 AM »
Quote from: tiswell on January 01, 2018, 02:21:26 AM
Mike,
   Great looking rifle!  Can you tell me where can one find any info on L.Nash?

                                                                                                                                                       Thanks, Bill
Bill Ivey's book.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?
Pages: 1 [2] 3 4   Go Up
« previous next »