« previous next »
Pages: [1]   Go Down

Author Topic: Horn W/Threads At Both Ends  (Read 3434 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Horn W/Threads At Both Ends
« on: January 06, 2018, 11:13:05 PM »
  This one is after a horn on page 182 of Jay Hopkins' book; Bone Tipped & Banded Horns.
It is about 12 1/2" around the outside curve and 10" Tip to Tip. The Maple butt is held in with 5 wooden pegs, it is drilled and tapped 1/2-6 tpi as is the Walnut finial. The tip is horn, threaded 5/8-11, if the tip is removed it will fit in the butt to act as a funnel, although with the concave it doesn't need it.
 Color on this one is Coffee beans with some Brown Shoe polish.

  Tim C.











post image on forums
« Last Edit: January 07, 2018, 04:39:50 PM by Tim Crosby »
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19487
    • GillespieRifles
Re: Horn W/Threads At Both Ends
« Reply #1 on: January 06, 2018, 11:16:36 PM »
Very nice, love those simple unadorned horns
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline TN Longhunter

  • Sr. Member
  • ****
  • Posts: 287
Re: Horn W/Threads At Both Ends
« Reply #2 on: January 07, 2018, 12:51:58 AM »
Dang it. Now you have gone and given me something to try.  Nice horn. Anyone would be proud to hang in on their side.
Logged
Don Spires
Tennessee Longhunters
Patron Life NRA
NMLRA
CLA

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Horn W/Threads At Both Ends
« Reply #3 on: January 07, 2018, 01:13:05 AM »
That's way clever.  I did something similar to three of my horns but threaded the one horn tip on the outside and the other two on the inside.  Your work is infinitely better than mine, though. 
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: Horn W/Threads At Both Ends
« Reply #4 on: January 07, 2018, 02:10:04 AM »
Tim,
That's pretty neat. Nice work.
Mark
Logged
Mark

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3479
Re: Horn W/Threads At Both Ends
« Reply #5 on: January 07, 2018, 06:19:26 AM »
Lovely work, Tim!
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3707
Re: Horn W/Threads At Both Ends
« Reply #6 on: January 08, 2018, 12:29:57 AM »
I am impressed by your work getting that tip drilled and tapped without cracking out that shaped tip.  Cannot have been easy. 

The fill plug in the butt is way cool, and similar to the way my great uncle's horn was made in Iceland.  The contrasting color of the screw-in plug and butt work well together. 

All in all a really neat work. 

Best wishes, and God Bless,   Marc
Logged

Offline Mike from OK

  • Hero Member
  • *****
  • Posts: 1084
Re: Horn W/Threads At Both Ends
« Reply #7 on: January 20, 2018, 06:28:27 AM »
Beautiful work!

Just my opinion, but I think a dark brown leather strap would look suitable for toting that horn.

Mike

Logged

cmakamson

  • Guest
Re: Horn W/Threads At Both Ends
« Reply #8 on: January 26, 2018, 11:18:21 PM »
The concave base plug is a good idea.  Yours certainly looks good.
Logged

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: Horn W/Threads At Both Ends
« Reply #9 on: January 29, 2018, 03:46:52 AM »
Looks great Tim. Simple seeming but tougher than it looks.
Logged
Member Honorable Company of Horners
Member of the CLA
Pages: [1]   Go Up
« previous next »