« previous next »
Pages: [1]   Go Down

Author Topic: Rio Grande supply sheet brass  (Read 1273 times)

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19540
Rio Grande supply sheet brass
« on: January 18, 2018, 06:39:19 PM »
I need some wide sheet brass for my next Fainot patchbox and Rio Grande supply has 6X12” sheet.  Have any of you used their sheet brass and do you think the color would match well enough with Reeves Goehring castings?
Logged
Andover, Vermont

Offline deepcreekdale

  • Hero Member
  • *****
  • Posts: 641
Re: Rio Grande supply sheet brass
« Reply #1 on: January 18, 2018, 07:53:53 PM »
I have used their brass before, very high quality, nice and yellow and looks good with Goehring castings. I believe it is 230 jewelers brass. I buy most of my brass now from McMaster Carr which is 260 due to larger sizes being available and resultant cost savings. To be honest, I can't tell that much difference in color/hardness after annealing.
Logged
”Far and away the best prize that life has to offer is the chance to work hard at work worth doing.” Theodore Roosevelt

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2215
Re: Rio Grande supply sheet brass
« Reply #2 on: January 18, 2018, 08:25:40 PM »
I also buy my brass from McMaster-Carr. My last order was for 3 -12" X 12" sheets each of 0.040" & 0.050" thickness - good stuff.
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb
Pages: [1]   Go Up
« previous next »