« previous next »
Pages: 1 [2]   Go Down

Author Topic: First test fire questions  (Read 5448 times)

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3472
Re: First test fire questions
« Reply #25 on: January 26, 2018, 05:26:38 PM »
For trying out rusty old relic fowling pieces, I'd tie them to a padded saw horse and use a decent charge.
Saw horse can move so no damage to stock.

For modern and newly made barrels, just shoot them!
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: First test fire questions
« Reply #26 on: January 26, 2018, 10:24:09 PM »
 I just proof the barrel. The rest of the gun will never explode. HE HE HE,  I use a double powder charge and two patched round balls. Two or three times.  If the barrel was made by a known maker the chances of it failing are extremely small.
  The only barrels I ever heard of that failed were loaded with modern powder or one had a full charge on top of another full charge.  An old friend of mine made a blunderbuss out of some steel tubing. That barrel exploded with a normal charge the first time.  He is long gone now.  I once tested a barrel with 6 times the normal load three times. no problems. I still have that gun. That was 1975
Logged
Nobody is always correct, Not even me.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: First test fire questions
« Reply #27 on: January 27, 2018, 12:15:49 AM »
When Taylor is finished a rifle or smoothbore, he calls and we meet at the club and just shoot it.  Never thought of 'proofing' the gun.

When you send close to or over $1,000.00 on parts and put them together correctly, the thought of a failure never occurs to us.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline shortbarrel

  • Sr. Member
  • ****
  • Posts: 332
Re: First test fire questions
« Reply #28 on: January 27, 2018, 01:33:34 AM »
God blessed every gun builder that has't proofed his build. He still has all his fingers and no scar between his eyes.
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: First test fire questions
« Reply #29 on: January 27, 2018, 03:53:33 AM »
Oh we proof them all right - by shooting them.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline JCKelly

  • Hero Member
  • *****
  • Posts: 1434
Re: First test fire questions
« Reply #30 on: January 27, 2018, 09:51:05 PM »
PROOF TESTING NEW BARRELS, by the late Roy Keeler, page 9, December, 1972 Muzzle Blasts

Interesting article. I can't post it here because of copyright matters.     

However I'd be glad to send a pdf to anyone who sends his email, off-line. I still have some windmill concerns. Contact jkellymetal@gmail.com 
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: First test fire questions
« Reply #31 on: January 27, 2018, 09:55:50 PM »
 If you got that barrel from Jim Chambers it isn't going to be unsafe to shoot.  Jim would never sell anything bad or dangerous.
Logged
Nobody is always correct, Not even me.

Offline Frank

  • Hero Member
  • *****
  • Posts: 968
Re: First test fire questions
« Reply #32 on: January 27, 2018, 11:23:57 PM »
I only use Rice and Colerain barrels and see no reason to proof them. I used Getz barrels exclusively back in the 70s and 80s when they were easy to get and did not proof them either.
Logged

Offline Justin

  • Full Member
  • ***
  • Posts: 182
Re: First test fire questions
« Reply #33 on: January 28, 2018, 07:49:24 AM »
Quote from: jerrywh on January 27, 2018, 09:55:50 PM
If you got that barrel from Jim Chambers it isn't going to be unsafe to shoot.  Jim would never sell anything bad or dangerous.

Yep, I did. It's actually a Rice Barrel. I'm sure it's fine. Just wondering what others do.
Logged
Pages: 1 [2]   Go Up
« previous next »