Author Topic: Where are the gun makers??  (Read 16993 times)

Online t.caster

  • Hero Member
  • *****
  • Posts: 3728
Re: Where are the gun makers??
« Reply #25 on: May 12, 2009, 07:25:16 PM »
Thanks for posting Rich, I've been waiting about 5 yrs. to see that one. Hey, glaciers melt faster than that  ;D
Starting to look like something now!!!
Tom C.

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19461
Re: Where are the gun makers??
« Reply #26 on: May 12, 2009, 07:46:44 PM »
I hear ya on glaciers.  Once a build gets to this stage, I tend to get excited and can't leave it alone.  Lots of decisions to make.
Andover, Vermont

J Shingler

  • Guest
Re: Where are the gun makers??
« Reply #27 on: May 13, 2009, 06:18:49 AM »
Capt Fred,
Looks good. Tang inlet looks good. Not easy to do with that long tang with the taper and flare. Nice color too.
Jeff

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19461
Re: Where are the gun makers??
« Reply #28 on: May 14, 2009, 05:27:13 PM »
I've been making progress on buttstock shaping.  Probably next I will make and inlet the entry thimble.  That will allow me to shape the forearm.  Once that is done I can shape the lock panels and lock panel to wrist transition, make a sideplate etc.  I like shaping buttstocks so generally get a head start on that and get it fairly far along before working on the lock area.  Quick and dirty photos.





Andover, Vermont

Offline Roger Fisher

  • Hero Member
  • *****
  • Posts: 6805
Re: Where are the gun makers??
« Reply #29 on: May 14, 2009, 06:33:40 PM »
Thanks for posting the photos.  I like to see examples of work in progress!


Offline KLMoors

  • Hero Member
  • *****
  • Posts: 859
Re: Where are the gun makers??
« Reply #30 on: May 15, 2009, 04:19:44 PM »
Here are a couple of pics of the TOTW Jim Bridger. I tried some antique work on the steel on this one. Came out so-so. I think I'll rust the next one I try to antique a bit deeper to get some more texture along with the color changes.




Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19461
Re: Where are the gun makers??
« Reply #31 on: May 15, 2009, 04:59:20 PM »
looks great.  Fine lines and coloring, would like to see more closeups, cheekpiece, etc.
Andover, Vermont

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Where are the gun makers??
« Reply #32 on: May 15, 2009, 05:11:14 PM »
I like that Hawken, looks great. I'd just knock off the sharp edges on the barrel a bit and you're good to go!
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline KLMoors

  • Hero Member
  • *****
  • Posts: 859
Re: Where are the gun makers??
« Reply #33 on: May 15, 2009, 07:06:06 PM »
Thanks Rich and Mike. Here are a few more pics.








Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19461
Re: Where are the gun makers??
« Reply #34 on: May 15, 2009, 08:15:20 PM »
Thanks, great looking Hawken rifle.
Andover, Vermont

omark

  • Guest
Re: Where are the gun makers??
« Reply #35 on: May 16, 2009, 06:17:07 AM »
like the gun, really like the wood.        mark            8)

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Where are the gun makers??
« Reply #36 on: May 16, 2009, 06:02:19 PM »
I'm not a fan of 1/2 stock cap lock rifles, but that one is one I could easily live with! ;D
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline KLMoors

  • Hero Member
  • *****
  • Posts: 859
Re: Where are the gun makers??
« Reply #37 on: May 17, 2009, 04:00:32 PM »
Thanks guys. And Mike, having seen your work on your website I really appreciate your praise. Thanks again.

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9919
  • Kill a Commie for your Mommy
Re: Where are the gun makers??
« Reply #38 on: May 17, 2009, 07:09:04 PM »
This the finish on a used S Hawken rifle.




This is how most old used guns look like and this one is likely pretty much like it was at the end of its service life, likely being retired with 10-20 years service (?). It shows the correct finish/metal/wood wear.
Here is a trade gun same scenario of use.


This goes back to my post on the "bleach" thread concerning people trying to "antique" something when they don't even know what its supposed to look like.
This is not an insult to anyone its a simple statement of fact.

ALL the wood and ALL the metal does not "age" at the same rate.
The metal parts don't look like they were boiled in bleach.
Most of the overall pitting on guns comes from STORAGE after they fell from use (kids playing with the "old gun" does not help either) or outright neglect/stupidity by the owner. USING the gun and doing a little maintenance tends to PREVENT pitting other than chlorate pits on percussion guns. Just using oiled or greased patches will put some oil/grease on some metal parts.
So the old guns, at least during their service life, don't look like they were boiled in bleach.
I have a rifle that has been shot hundreds of shots. Its been dinged and dented. But the heat blue is hardly worn off the TG and pipes. It was made about 30 years ago. It is neither excessively pampered or abused.
Dan
He who dares not offend cannot be honest. Thomas Paine