« previous next »
Pages: [1]   Go Down

Author Topic: Folks who do jug choking  (Read 2016 times)

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Folks who do jug choking
« on: April 26, 2018, 01:20:22 PM »
     A friend would like to get a 20 ga. barrel jug choked,  Caywood says that he will not jug choke a barrel with a vent liner.  Can you give me some contact info. for other venders who will do this work.
Thanks Ron
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline Dave Marsh

  • Hero Member
  • *****
  • Posts: 828
Re: Folks who do jug choking
« Reply #1 on: April 26, 2018, 03:20:25 PM »
Lowell Tennyson in Iowa did mine years ago.  Don't know if he still is doing it.

209 E. Lotte St
Blue Grass, IA 52726
(563) 381-3711

Dave
Logged
"Those who give up freedom for security deserve neither freedom nor security."
~ Benjamin Franklin

Offline Eric Krewson

  • Hero Member
  • *****
  • Posts: 2257
Re: Folks who do jug choking
« Reply #2 on: April 26, 2018, 04:35:11 PM »
Caywood did two for me that have vent liners but I can't remember if I had installed them before I sent him the barrels, probably not because I don't think I had the underlugs on when I sent the barrels.

He does have this thing about vet liners..........
Logged

n stephenson

  • Guest
Re: Folks who do jug choking
« Reply #3 on: April 26, 2018, 04:43:25 PM »
What is the deal with a vent liner? :o :o :o
Logged

Offline L. Akers

  • Hero Member
  • *****
  • Posts: 509
Re: Folks who do jug choking
« Reply #4 on: April 26, 2018, 04:44:25 PM »
???What does a vent liner have to do with a jug choke--they are at opposite ends of the barrel???
Logged

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2397
Re: Folks who do jug choking
« Reply #5 on: April 26, 2018, 06:06:53 PM »
Use a Lewis lead remover and sand paper. 
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Folks who do jug choking
« Reply #6 on: April 26, 2018, 06:12:05 PM »
Quote from: Scota4570 on April 26, 2018, 06:06:53 PM
Use a Lewis lead remover and sand paper.
Unfortunately, it's not that easy.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2397
Re: Folks who do jug choking
« Reply #7 on: April 26, 2018, 06:25:41 PM »
It was for me.  I must have gotten lucky.  I was only looking or a little choke, not full choke performance. Just enough to even out the patterns. 
Logged

Offline Mauser06

  • Hero Member
  • *****
  • Posts: 932
Re: Folks who do jug choking
« Reply #8 on: April 26, 2018, 06:43:46 PM »
I must have gotten lucky. I sent mine to Caywood...it was completely finished with vent liner, tennons, sights, browned...breeched. came back jugged.
Logged

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Folks who do jug choking
« Reply #9 on: April 26, 2018, 06:58:19 PM »
  Check with Ed Rayl. He might do it.  Just a thought ! Oldtravler
Logged

Matt / PA

  • Guest
Re: Folks who do jug choking
« Reply #10 on: April 26, 2018, 09:47:42 PM »
Ron,

Both myself and Todd have had guns jug choked by Caywood.
Todd just got your 16ga back from him and it's throwing terrific turkey killing patterns now!....both guns obviously had vent liners in them.
Logged

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Re: Folks who do jug choking
« Reply #11 on: April 27, 2018, 12:46:52 AM »
      Thanks Matt.  Todd is coming up to the shop on the 7th. so I will talk to him about it.  Charlie one of the guys who works in the shop wants to get a couple of 20 ga. barrels done, but the vent liner thing stopped us.  I guess white lightening liners are ok.   I will have Charlie call Mr. Caywood and see what the story is.   
Ron
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline L. Akers

  • Hero Member
  • *****
  • Posts: 509
Re: Folks who do jug choking
« Reply #12 on: April 27, 2018, 05:12:15 PM »
I have done a few barrels using a brake cylinder hone.
Logged

Offline gumboman

  • Sr. Member
  • ****
  • Posts: 263
    • Gumbocooking
Re: Folks who do jug choking
« Reply #13 on: April 27, 2018, 08:57:19 PM »
Mr. Tennyson does a great job. He jug choked a 12 bore for me and I get great patterns. I would not hesitate to shoot a turkey at 45 yards as I know the patterns have great density. Took two long beards this year with my New England fowling piece with the jug choked barrel. I love it. Mr. Tennyson is a real nice man too.
Logged
Pages: [1]   Go Up
« previous next »