« previous next »
Pages: [1]   Go Down

Author Topic: Long ramrod needed  (Read 1623 times)

Offline trailerpark

  • Starting Member
  • *
  • Posts: 37
Long ramrod needed
« on: April 30, 2018, 02:05:06 PM »
Does anyone know where I could find a ramrod for a 51" barrel? Metal and/or hickory.
Logged

Offline drago

  • Full Member
  • ***
  • Posts: 147
Re: Long ramrod needed
« Reply #1 on: April 30, 2018, 02:20:03 PM »
I believe Rice Barrels will make you one, my 48 inch ones are great.
Logged

Offline Old Ford2

  • Hero Member
  • *****
  • Posts: 1102
Re: Long ramrod needed
« Reply #2 on: April 30, 2018, 03:18:14 PM »
PM sent.
Fred
Logged
Never surrender, always take a few with you.
Let the Lord pick the good from the bad!

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7910
Re: Long ramrod needed
« Reply #3 on: April 30, 2018, 06:39:03 PM »
You might consider going to a lumber place and buying a 4" wide hickory board and splitting it and making your own.
Logged

Offline bones92

  • Hero Member
  • *****
  • Posts: 1191
  • I'm broke, and I blame Mike Brooks!
Re: Long ramrod needed
« Reply #4 on: April 30, 2018, 07:14:34 PM »
Ditto the Rice Barrel rods.  I have several.   They're great.  http://www.ricebarrels.com/other%20products.html

They only have a 36" and 48" option, though you might inquire if they can make a longer one.  Otherwise, they might make you a short extension upon request.  Something with the same thread tapped into each end, and you can join them with a short threaded coupler.
Logged
If it was easy, everyone would do it.

Offline Silverfox

  • Starting Member
  • *
  • Posts: 10
Re: Long ramrod needed
« Reply #5 on: April 30, 2018, 08:14:12 PM »
I just had Mike Eder make me up a 55 inch stainless steel rod range rod for a chunk gun.  His contact info is

Flintlocks, Inc

6929 Beech Tree Road
Nineveh, IN 46164-9308
317 933 3441
317-683-5102
Logged

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2398
Re: Long ramrod needed
« Reply #6 on: April 30, 2018, 11:38:02 PM »
If you are open to fiberglass or carbon:

https://goodwinds.com/fiberglass/solid-fiberglass.html

UP to 72".  IF you are concerned about abrasiveness put some shrink tubing over it.

Logged

Offline trailerpark

  • Starting Member
  • *
  • Posts: 37
Re: Long ramrod needed
« Reply #7 on: May 01, 2018, 05:33:21 AM »
Thanks for all the replies, I think I have found a local source. Thanks, Trent
Logged
Pages: [1]   Go Up
« previous next »