Author Topic: Maple Leaf Inlay  (Read 2600 times)

Offline 120RIR

  • Sr. Member
  • ****
  • Posts: 392
Maple Leaf Inlay
« on: July 13, 2018, 11:49:25 PM »
Has anyone seen an inlay like this before?  If so, any ideas as to where this rifle may have been made?  Or - are we perhaps looking at a 1960s-70s contemporary piece?






greybeard

  • Guest
Re: Maple Leaf Inlay
« Reply #1 on: July 14, 2018, 02:14:21 AM »
To my eye it looks contemporary but I have been wrong a couple of times before.!!
Bob

Offline Eric Kettenburg

  • Hero Member
  • *****
  • Posts: 4178
    • Eric Kettenburg
Re: Maple Leaf Inlay
« Reply #2 on: July 14, 2018, 04:08:49 AM »
Brian going by photos alone is very tough and often an exercise in futility but that sure looks like a piece stocked up in the 1950s-1960s to me.  There might have been some old parts recycled - this has been going on forever but there was quite a resurgence as early as the 1920s, when Dillin's book was 'cutting edge,' and there were quite a cadre of guys shooting, "improving" and restocking old guns and old parts even that early in the 20th century.
Strange women lying in ponds, distributing swords, is no basis for a system of government!

Offline 120RIR

  • Sr. Member
  • ****
  • Posts: 392
Re: Maple Leaf Inlay
« Reply #3 on: July 14, 2018, 05:55:55 AM »
The more I look at the photos (I don't have the rifle...photos provided by an acquaintance looking for answers), the more I think perhaps a mid-20th century job.  Maybe some old parts as suggested?  Probably Canadian  ;)

Offline okieboy

  • Hero Member
  • *****
  • Posts: 822
Re: Maple Leaf Inlay
« Reply #4 on: July 14, 2018, 06:06:46 AM »
 It is obviously "Leman-esk", but obviously not a Leman. Reminds me of the guns that I would see back when I started in the 60's. There was little information, poor photos, and an attitude of "I thought it would be neat to....."; then a combination of things from various schools. (However the shoots seemed generally more fun back then, or maybe I was just younger.)
Okieboy

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: Maple Leaf Inlay
« Reply #5 on: July 14, 2018, 05:58:01 PM »
Is that a "Teutonic" eagle on the fore-end?  Looks pretty nice, and whoever did the maple leaf inlay did a good job.
No opinion on age.

Craig
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4351
Re: Maple Leaf Inlay
« Reply #6 on: July 14, 2018, 06:33:22 PM »
Maybe a few old parts, but overall I'd guess that most of the guys here are older than that gun!
John
John Robbins

Big Wolf

  • Guest
Re: Maple Leaf Inlay
« Reply #7 on: July 16, 2018, 04:15:40 AM »
Maybe a few old parts, but overall I'd guess that most of the guys here are older than that gun!
John

Yes, I agree with JTR

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15848
Re: Maple Leaf Inlay
« Reply #8 on: July 18, 2018, 04:44:41 AM »
The forend ahead of the lock appears overly heavy to me, so I'd also guess contemporary & likely a Canadian maker - Ontario maybe - John Clark? Is that the fellow from over near Toronto?
« Last Edit: July 18, 2018, 04:45:17 AM by Daryl »
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Maple Leaf Inlay
« Reply #9 on: July 18, 2018, 06:01:02 AM »
That is not John Clark's work!!
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline bob in the woods

  • Hero Member
  • *****
  • Posts: 4555
Re: Maple Leaf Inlay
« Reply #10 on: July 19, 2018, 04:02:33 PM »
I met John Clark back in the 70's, and have seen many examples of his work. I agree with Taylor ; this gun is in no way representative of Clark.

Offline trentOH

  • Hero Member
  • *****
  • Posts: 591
Re: Maple Leaf Inlay
« Reply #11 on: July 21, 2018, 08:36:15 PM »
That maple leaf is not and has not been on the Canadian flag, nor on the Coats of Arms.
I would guess it is late 20th century, and the inlays are from someone's special tree.

A good look at the inside of the patchbox lid may reveal the source of this rifle. It did on mine.

Offline Dale Campbell

  • Sr. Member
  • ****
  • Posts: 327
Re: Maple Leaf Inlay
« Reply #12 on: July 31, 2018, 07:06:41 PM »
That patchbox design is from McCrory's book (edit: or close to it). I got my copy in 1900 and 73, and it had been around a while then. That rifle is likely fro the 60s or 70s.
« Last Edit: July 31, 2018, 07:25:29 PM by Dale Campbell »
Best regards,
Dale