Author Topic: Learning hammer and chisel engraving  (Read 1777 times)

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Learning hammer and chisel engraving
« on: August 19, 2018, 08:24:22 AM »
Ok, I'm getting fairly good at building, carving, and finishing 18th century longrifles.  BUT, to say my engraving is rudimentary, would be an understatement.
Where does a guy go to get some real, hands on engraving instruction?
My technique just sucks, and I'd love to learn to be at least mediocre.
Any help?
Thanks in advance.
In His grip,

Dane

Offline Chowmi

  • Hero Member
  • *****
  • Posts: 843
Re: Learning hammer and chisel engraving
« Reply #1 on: August 19, 2018, 10:54:57 AM »
Smallpatch,
Tom Curran (Acer) is teaching an engraving class at the Southern Ohio workshop in September. Read the sticky note at the top of this forum.
There may still be spots available. If not, there is often an engraving class at the WKU gunsmithing seminar in June. Class listings for that should be out sometime around November if I remember right.

Cheers,
Norm.
Cheers,
Chowmi

NMLRA
CLA

Offline P.Bigham

  • Hero Member
  • *****
  • Posts: 597
Re: Learning hammer and chisel engraving
« Reply #2 on: August 19, 2018, 02:43:42 PM »
Chuck Edwards was offering classes. 
" not all who wander are lost"

Offline G_T

  • Full Member
  • ***
  • Posts: 228
Re: Learning hammer and chisel engraving
« Reply #3 on: August 19, 2018, 07:02:53 PM »

Offline moleeyes36

  • Hero Member
  • *****
  • Posts: 1443
Re: Learning hammer and chisel engraving
« Reply #4 on: August 30, 2018, 04:12:17 PM »
Smallpatch,
Tom Curran (Acer) is teaching an engraving class at the Southern Ohio workshop in September. Read the sticky note at the top of this forum.
There may still be spots available. If not, there is often an engraving class at the WKU gunsmithing seminar in June. Class listings for that should be out sometime around November if I remember right.

Cheers,
Norm.

Unfortunately Tom Curran's classes scheduled for this Sept at the Southern Ohio workshop where just cancelled this week because of an illness preventing Tom from conducting them.  Let's hope Tom's recovery is speedy and complete.  Maryellen Pratt notified all of us enrolled that there may be rescheduling for a future date.  If not, let's hope the WKU gun smithing seminar has an engraving class this June.

Mole Eyes
Don Richards
NMLRA Field Rep, Instructor, Field Range Officer
NRA Chief Range Safety Officer

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Learning hammer and chisel engraving
« Reply #5 on: August 30, 2018, 05:06:58 PM »
Chuck Edwards was offering classes.
I saw Chuck's work at the CLA. He's probably now one of the best out there.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: Learning hammer and chisel engraving
« Reply #6 on: August 30, 2018, 07:09:33 PM »
I met Chuck at Fort Fredrick this spring. He is a very talented engraver!
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5129
Re: Learning hammer and chisel engraving
« Reply #7 on: August 30, 2018, 07:29:52 PM »
There are many engravers who teach, but it depends on several factors:
1  Where do you live?
2  How far are you willing to travel?
3  How much are you willing to pay?

Muzzleloading engraving is a fairly limited field, but most professional gun or knife engravers cover a wider range.
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson