Author Topic: Reabilding a 1835/46 D/N pistol (Read 6165 times)

runastav · « **on:** August 26, 2018, 12:28:34 PM »

Hi Guys! I am working on this pistol now, and if Dennis allow I will post progress in the building.In photo it lay under a Swedish 1820-1857 who was the innspiration of the Norwegian 1835 flint pistol converted to percusion in 1846
Runar

Craig Wilcox · « **Reply #1 on:** August 26, 2018, 02:38:12 PM »

That is a really nice pistol! I presume that the broken pistol stock is going to be rebuilt to look like the finished pistol, in which case you are going to have a splendid addition to your collection.

This is the first time I have seen this type of safety, which looks easy to operate and to build. I wouldn't mind having that type of safety on one of my firearms.

Good luck with your project, and do keep us posted on progress!

Davemuzz · « **Reply #2 on:** August 26, 2018, 02:43:42 PM »

I'm just installed the forestock cap on a long rifle I'm building. So I'm looking at that brass muzzle piece on that pistol......thinking I'd love to see your progress on how you make that piece!! Looking forward to pics!!

smylee grouch · « **Reply #3 on:** August 26, 2018, 05:14:47 PM »

That looks like another interesting project. We all learn so much when you build your guns and enjoy your posts along the way.

runastav · « **Reply #4 on:** August 28, 2018, 07:04:17 PM »

Hi Guys! And thank you all! Missing Wood (Birch) is glued in place :)And New brass sideplate made
Runar

Robert Wolfe · « **Reply #5 on:** August 28, 2018, 07:36:58 PM »

What happened to the pistol? Did the barrel blow up?

webradbury · « **Reply #6 on:** August 28, 2018, 07:53:21 PM »

I want runastav as a neighbor!

runastav · « **Reply #7 on:** August 30, 2018, 07:14:34 PM »

Hi Guys! And thank you, Robert Wolfe maby the nazi destroy it when they have occupy Norway in last world war?

The lockplate and sideplate inletted in New Wood.
Runar

aluminum oxide al2o3

Bob Roller · « **Reply #8 on:** August 30, 2018, 09:14:58 PM »

Runar must have the patience of a wooden Indian and the skill of a brain surgeon to
take this on.

Bob Roller

Baldano · « **Reply #9 on:** August 31, 2018, 04:53:36 PM »

Man, this looks like quite an undertaking. I can't wait to see the pistol rebuilt, Runastav!

runastav · « **Reply #10 on:** September 01, 2018, 02:47:31 PM »

Hi all and thank you Bob and Baldano!
Cant get original barrel, so I made it from a thick walled pipe dia 32mm and inside 17,1mm perfekt. Start With breach plug treads 2oX 2,5 mm. And outside litle swamped I take in my big boss Lathe (Norwegian Brødrene Sundt weigth ca 1,5 ton)The original barrel in photo is not mine its loaned from a gunfriend for copy

Runar

Pukka Bundook · « **Reply #11 on:** September 01, 2018, 03:13:01 PM »

Very good and interesting work, Runastav!!

I look forward to the next part!!

Richard.

Rolf · « **Reply #12 on:** September 01, 2018, 03:43:58 PM »

Very Nice work Runar! I look forward to see how you are goiing to make the nippel bolster on the barrel.

Best regards
Rolf

Craig Wilcox · « **Reply #13 on:** September 02, 2018, 12:32:25 AM »

Runar, at 17.1 mm cal (approx. .67/.68" cal), you are going to have a huge chunk of lead moving. Be sure to use both hands when firing!

I believe that this is going to be a beautiful replica when you are done - you have a great eye for detail in all your work.

runastav · « **Reply #14 on:** September 03, 2018, 05:43:07 PM »

Hi all, and thank you guys! Rolf, wayt and see

The barrel inlett in New Wood.
Runar

fahnenschmied · « **Reply #15 on:** September 04, 2018, 11:20:07 PM »

Very nice work.

runastav · « **Reply #16 on:** September 05, 2018, 08:52:55 PM »

Hi Guys! And thank you fahnenschmied!
Breach plug made from 20mm bolt tang welded on.
Runar

Craig Wilcox · « **Reply #17 on:** September 06, 2018, 03:11:02 AM »

Runar, your work constantly amazes me! You are very precise, very thorough.
Love that big lathe! Lots of wheels, levers. gears, etc. Do I remember you saying it is 1.5 tons? And how long have you been using it? You seem to be a very accomplished machinist - and I like all the projects that you tackle. Thanks for showing us all the progress.

runastav · « **Reply #18 on:** September 07, 2018, 04:57:36 PM »

Hi all and thank you Craig Wilcox, this lathe do I have ca 20 years

and I have 2 more smaller!
Tang screw and barrel lug made.
Runar

runastav · « **Reply #19 on:** September 09, 2018, 01:06:22 PM »

Hi all, so the nipple bolster(Tennkloss) must be made from a 16mm plate ;)sharp-sighted will see the the litle pinn in bolster I use to mark the flashhole in barrel.The bolster is silversolder to barrel and is guided by a 6mm bolt With 4mm hole.
Runar

how do i delete an account

Craig Wilcox · « **Reply #20 on:** September 09, 2018, 03:37:08 PM »

Pretty darn good job with the files - you've made it have the same graceful style as the original! I like doing that sort of filing, gives you a great feeling, especially when it comes out so well!
R, are you about 5 hours ahead of us on the clock? We are GMT +4 here, well, +5 during the summer. USed to work with a nice Norwegian girl, great engineer (PE)! But never thought of asking her the time difference.

runastav · « **Reply #21 on:** September 12, 2018, 02:36:40 PM »

Hi all! and thank you Craig Wilcox, from here to New york is ca 6 hours different

Teh hammer is in Place. Lucky me have a cast from dont remember P Dyson og Blackley?To get it flat a buddy mig welded it.
Runar

PPatch · « **Reply #22 on:** September 12, 2018, 04:48:59 PM »

You are doing well Runastav. Spot on wood and metal working, I am enjoying your progress reports.

dave

runastav · « **Reply #23 on:** September 15, 2018, 07:20:56 PM »

Hi all! and thank you PPatch! Triggergard made, brass I take wat I have

Runar

kaler jatrar dhwani poem lyrics

Pukka Bundook · « **Reply #24 on:** September 15, 2018, 09:47:49 PM »

A big job! and So Well done Runar! You make it look so easy.
Between sets of pictures, I know there is an awful lot of work goes into it!

Thanks for showing us the progress.

Richard.

News:

Author Topic: Reabilding a 1835/46 D/N pistol (Read 6165 times)

Davemuzz

Baldano