« previous next »
Pages: [1]   Go Down

Author Topic: Jaeger castings  (Read 2006 times)

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Jaeger castings
« on: September 23, 2018, 01:58:47 AM »
Does anyone know of a place to purchase some but plates and trigger guards for a Jaeger rifle build? I am looking for something other than the common stuff that everyone sells, preferably something early. I'm also looking for some good early jaeger patterns. Any help would be greatly appreciated.
Thank You
John
Logged
The difficult we do at once, the impossible takes a little longer.

Offline FlintFan

  • Full Member
  • ***
  • Posts: 249
Re: Jaeger castings
« Reply #1 on: September 23, 2018, 02:13:50 AM »
The Rifle Shoppe


Logged

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jaeger castings
« Reply #2 on: September 23, 2018, 02:26:52 AM »
I wish I could get through to them. I've tried calling and emailing and they never get back to me. I was interested in one of their locks also.
Logged
The difficult we do at once, the impossible takes a little longer.

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19434
Re: Jaeger castings
« Reply #3 on: September 23, 2018, 02:50:49 AM »
Ask Ron Scott. He’s a member here.
Logged
Andover, Vermont

Offline Osprey

  • Hero Member
  • *****
  • Posts: 1353
  • Roaming Delmarva...
Re: Jaeger castings
« Reply #4 on: September 23, 2018, 03:45:34 AM »
Ron's got a collection of castings at Muzzleloacer Builder Supply that's fairly new, some detailed, chiseled stuff.  Easiest way to find it for me was their online store, punch Jaeger in the search box.
Logged
"Any gun built is incomplete until it takes game!"

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3427
Re: Jaeger castings
« Reply #5 on: September 23, 2018, 05:19:59 AM »
The castings from Track can be altered quite a bit.  I have done this and it seemed to work.   

Best,
R.
Logged

Offline Ron Scott

  • Hero Member
  • *****
  • Posts: 1046
Re: Jaeger castings
« Reply #6 on: September 23, 2018, 07:22:07 AM »
I just received some casting sets that are from the NMLRA class this last June. You can see the original rifle by going to the Jaeger Rifle Seminar Sticky in the Gun Building Forum.  This set is in White Brass. Contact me at ronscottflintlocks@gmail.com and I can send you particulars.

Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Jaeger castings
« Reply #7 on: September 23, 2018, 04:02:09 PM »
I have a buttplate and trigger guard from the Pistor rifle (Brandenburg) I could part with.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Elnathan

  • Hero Member
  • *****
  • Posts: 1773
Re: Jaeger castings
« Reply #8 on: September 23, 2018, 04:16:35 PM »
Buttplates aren't too difficult to swage out of sheet brass, depending on the style.
Logged
A man can never have too much red wine, too many books, or too much ammunition -  Rudyard Kipling

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jaeger castings
« Reply #9 on: September 23, 2018, 04:28:27 PM »
Thank you for the information. I have a couple Jaeger projects in the works. I will definitely be in contact with Ron Scott.
Logged
The difficult we do at once, the impossible takes a little longer.

Offline rtadams

  • Full Member
  • ***
  • Posts: 206
Re: Jaeger castings
« Reply #10 on: September 24, 2018, 06:43:34 PM »
9-24-18

utseabee,

I have a few jaeger rifle barrels (62 cal x 31" long) left in inventory since 1985 or before that I built for John Bivins and brass butt plate and trigger guard pattern by Monte Mandarino with yellow brass castings from my foundry for my personal projects. I am considering selling and will be pulling from storage soon. If interested contact me at rtadams1@bellsouth.net

Best Regards,

Robert T Adams
« Last Edit: September 24, 2018, 06:51:05 PM by rtadams »
Logged

Offline Acer Saccharum

  • Administrator
  • Hero Member
  • *
  • Posts: 19311
    • Thomas A Curran
Re: Jaeger castings
« Reply #11 on: September 29, 2018, 05:49:45 PM »
R.T. Adams, I had used a Mint Hill Rifle Works barrel some years back, which I'd found on consignment. You were kind enough to send me a brochure on the Bivins Jaeger project. Thank you for that piece of information.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline rtadams

  • Full Member
  • ***
  • Posts: 206
Re: Jaeger castings
« Reply #12 on: October 01, 2018, 12:08:21 AM »
9-30-18

Acer,

I remember that discussion we had and sending you an original brochure that I made for the John Bivins Jaeger Rifle Barrel manufacturing project that I started in 1976. I have only a few barrels left and will probably remove from inventor sometime later this year or earlier for sale. Hard to let the past go, but must move forward. All wonderful memories of John Bivins and all of my friends that were associated with that project.

Thanks,

Robert

Logged
Pages: [1]   Go Up
« previous next »