Author Topic: fowling gun full of New England funky goodness  (Read 6674 times)

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
fowling gun full of New England funky goodness
« on: December 17, 2018, 08:24:02 PM »
Hoyt full round tapered 53 1/4" 20 bore barrel, 1 1/8" at the breech. Chambers early Ketland lock. Cherry stock stained with Ferric Nitrate then rubbed back with finish and a scotch brite pad. I soldered and riveted the trigger guard master together then had it sand cast. This is a copy of NE 17 in Grinslade's book, long wristed and short butted just like the original. Weighs 8 1/2 lbs.
Looks like I cut the full length of the barrel out of the picture by about 4".... ::)










NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline cable

  • Sr. Member
  • ****
  • Posts: 301
Re: fowling gun full of New England funky goodness
« Reply #1 on: December 17, 2018, 10:10:21 PM »
dramatic lines, and just amazing detail !  what a beauty

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1717
Re: fowling gun full of New England funky goodness
« Reply #2 on: December 18, 2018, 06:13:47 PM »
 :o :o :o.... I like it,... !!! ... color & finish on stock is amazing,... !!! ... great job, Mike,..!!!

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: fowling gun full of New England funky goodness
« Reply #3 on: December 18, 2018, 10:55:18 PM »
That gun is very easy on the eye and a lot more.  I like it.
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline bob in the woods

  • Hero Member
  • *****
  • Posts: 4555
Re: fowling gun full of New England funky goodness
« Reply #4 on: December 19, 2018, 12:23:50 AM »
That is fabulous !   The only improvement possible would be making it a 16 bore  ;D

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1286
  • Great X Grandpa
Re: fowling gun full of New England funky goodness
« Reply #5 on: December 19, 2018, 12:30:56 AM »
Nice. Hadn't seen Ferric Nitrate on cherry before. Did it blacken it?
Robert Wolfe
Northern Indiana

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: fowling gun full of New England funky goodness
« Reply #6 on: December 19, 2018, 01:30:02 AM »
Nice. Hadn't seen Ferric Nitrate on cherry before. Did it blacken it?

 Yep, real black. I expected that though, done it many times before.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7013
Re: fowling gun full of New England funky goodness
« Reply #7 on: December 19, 2018, 01:43:59 AM »
Hi Mike,
 I love it.  It is one of the nicest NE fowlers I've ever seen.  I like the architecture, the hardware, the color and finish, everything.  Mike, when you rub back the ferric nitrate what do you use?  I would really want to try your method on some cherry scrap but I've found that rubbing back ferric nitrate stain seems to take a lot of work.  On maple, after blushing the stain, I've tried to rub the color back at the wrist and other areas on some of my guns with Scotch Bright pads but I rub and rub and only make a small dent in the color. I've started believing that you guys who do this wonderful color aging have forearms like Popeye.  Again Mike, a great gun and I hope the eventual owner realizes he has an historically correct masterpiece.

dave
"The main accomplishment of modern economics is to make astrology look good."

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: fowling gun full of New England funky goodness
« Reply #8 on: December 19, 2018, 02:05:49 AM »
Hi Mike,
 I love it.  It is one of the nicest NE fowlers I've ever seen.  I like the architecture, the hardware, the color and finish, everything.  Mike, when you rub back the ferric nitrate what do you use?  I would really want to try your method on some cherry scrap but I've found that rubbing back ferric nitrate stain seems to take a lot of work.  On maple, after blushing the stain, I've tried to rub the color back at the wrist and other areas on some of my guns with Scotch Bright pads but I rub and rub and only make a small dent in the color. I've started believing that you guys who do this wonderful color aging have forearms like Popeye.  Again Mike, a great gun and I hope the eventual owner realizes he has an historically correct masterpiece.

dave
My pads are maroon in color, probably more course than a lot of guys use. Cuts quick. I use what ever finish I'm using as a lube while I'm scrubbing. It is a lot of work BTW...It kills my arthritic shoulders. I've learned to work both right and left handed while rubbing this stuff back. And yes, the owner has seen this thread and says I nailed it, just what he expected, which always makes me happy. :) It hits the road tomorrow.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2088
Re: fowling gun full of New England funky goodness
« Reply #9 on: December 19, 2018, 12:57:55 PM »
I like it. Lots ;D
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: fowling gun full of New England funky goodness
« Reply #10 on: December 19, 2018, 04:28:59 PM »
 Really neat looking, what's not to like. I cannot imagine swinging that on ducks, geese, whatever...

  Tim

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: fowling gun full of New England funky goodness
« Reply #11 on: December 19, 2018, 04:56:10 PM »
Really neat looking, what's not to like. I cannot imagine swinging that on ducks, geese, whatever...

  Tim

Thus the term "sitting duck". ;)
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: fowling gun full of New England funky goodness
« Reply #12 on: December 19, 2018, 05:35:44 PM »
Really neat looking, what's not to like. I cannot imagine swinging that on ducks, geese, whatever...

  Tim

Thus the term "sitting duck". ;)

 I was thinking more like a punt gun, Six inches of powder and 12 of something that resembles shot, clamped to the bow of a skiff or used with a gun Bearer :)
 In all seriousness it is a Great looking gun.

   Tim





« Last Edit: December 19, 2018, 05:55:30 PM by Tim Crosby »

Offline JV Puleo

  • Hero Member
  • *****
  • Posts: 935
Re: fowling gun full of New England funky goodness
« Reply #13 on: December 20, 2018, 08:03:23 PM »
That isn't a punt gun... it's a Chinese jingal. The photo is in the Library of Congress. It was a souvenir brought back from the Boxer Rebellion.

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: fowling gun full of New England funky goodness
« Reply #14 on: December 21, 2018, 12:28:21 AM »
Really neat looking, what's not to like. I cannot imagine swinging that on ducks, geese, whatever...

  Tim

Beautiful gun for sure.I assume standing on a stump or the lowered tailgate of a truck
to load it. The rifle credited to Daniel Boone in out art museum has a tapered and flared
barrel 51" long and it handles easily and it's 45 caliber and is easy to shoulder and aim
in spite of the length.

Bob Roller


Offline Terry Reynolds

  • Sr. Member
  • ****
  • Posts: 274
Re: fowling gun full of New England funky goodness
« Reply #15 on: December 23, 2018, 04:28:19 AM »
Dang Mike.....I would love to own a MB gun! Good looking piece.
aka “digger658”

Offline alex e.

  • Hero Member
  • *****
  • Posts: 772
Re: fowling gun full of New England funky goodness
« Reply #16 on: December 23, 2018, 01:02:58 PM »
I like it..  Nice work as always!
Uva uvam videndo varia fit

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: fowling gun full of New England funky goodness
« Reply #17 on: December 24, 2018, 06:02:18 AM »
Absolutely beautiful finish all the way around.  Really nice looking piece, Mike!



         Ed
Ed Wenger

Offline Pennsylvania Dutchman

  • Sr. Member
  • ****
  • Posts: 341
Re: fowling gun full of New England funky goodness
« Reply #18 on: December 26, 2018, 08:41:12 PM »
Very Nice! There is a lot there to like!
Mark
Mark Poley

Offline RichG

  • Sr. Member
  • ****
  • Posts: 455
Re: fowling gun full of New England funky goodness
« Reply #19 on: January 30, 2019, 07:21:58 AM »
Beautiful gun.

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: fowling gun full of New England funky goodness
« Reply #20 on: January 31, 2019, 12:57:19 AM »
  Really nice looking gun Mike.  Color, craftsmanship is  outstanding...!
    Oldtravler

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15826
Re: fowling gun full of New England funky goodness
« Reply #21 on: January 31, 2019, 01:04:44 AM »
That's quite a gun Mike - eccentric compared to later guns, but very nicely 'built' & finished.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1392
Re: fowling gun full of New England funky goodness
« Reply #22 on: February 19, 2019, 04:01:06 AM »
Nice fowler Mike. I like funky too.

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
Re: fowling gun full of New England funky goodness
« Reply #23 on: February 20, 2019, 06:48:11 AM »
Funky goodness indeed. Love the sideplate.

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: fowling gun full of New England funky goodness
« Reply #24 on: February 20, 2019, 04:53:39 PM »
Funky goodness indeed. Love the sideplate.
Yep, you couldn't ask for more funk than that sideplate.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?