« previous next »
Pages: [1] 2   Go Down

Author Topic: Double barrel flintlock shotgun project (updated 1/19/2019)  (Read 5234 times)

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Double barrel flintlock shotgun project (updated 1/19/2019)
« on: January 13, 2019, 08:06:31 PM »
Been wanting to build a side by side for a long time.  Finally got started.  Got the breech plugs made, fit and installed and the tang rough milled out.  Hopefully today I will get the hooked breeches mated to the tang.  Then I need to ream and hone the chokes out of the bores so it can be loaded from the muzzle.  It is looking like I will have pretty close to equal amounts of time just building the barrel assembly as in stocking the gun.
David



« Last Edit: January 20, 2019, 03:16:58 AM by David Rase »
Logged

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: Double barrel flintlock shotgun project
« Reply #1 on: January 13, 2019, 08:08:27 PM »
Wow!, David - you have some hard work ahead!

How are those barrels joined?
Logged
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline Telgan

  • Hero Member
  • *****
  • Posts: 569
Re: Double barrel flintlock shotgun project
« Reply #2 on: January 13, 2019, 08:23:14 PM »
 David - Whatcha using for barrels? I suspect i, and many others, will be asking more "whatcha" type questions. I am subscribed to this thread
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Double barrel flintlock shotgun project
« Reply #3 on: January 13, 2019, 08:49:36 PM »
This is a great project.  Please keep us posted as you proceed.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Double barrel flintlock shotgun project
« Reply #4 on: January 13, 2019, 09:04:10 PM »
Dave - did you take pictures of the fabrication of the breach plugs and barrel breach area - I find that to be the most interesting of the barrel build up. Looks like you did a nice job of it.
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Double barrel flintlock shotgun project
« Reply #5 on: January 14, 2019, 12:25:11 AM »
Quote from: D. Taylor Sapergia on January 13, 2019, 08:49:36 PM
This is a great project.  Please keep us posted as you proceed.

I agree With Taylor . I look forward to following  Your progess. A lot for us to learn from you.

Best regards
Rolf
Logged

Offline bgf

  • Hero Member
  • *****
  • Posts: 1403
Re: Double barrel flintlock shotgun project
« Reply #6 on: January 14, 2019, 02:17:20 AM »
Looking forward to it, and it's a long term goal of mine to build one also. 
Logged

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Double barrel flintlock shotgun project
« Reply #7 on: January 14, 2019, 02:34:28 AM »
Great start, David!  Now I know who I can hire to do double breech plugs 😬....



           Ed
Logged
Ed Wenger

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Double barrel flintlock shotgun project
« Reply #8 on: January 14, 2019, 06:06:53 AM »
Taylor,
I will keep you guys posted on the progress, as long as you have patience.  I have an Isaac Haines I am finishing up for a customer, an Allentown that I am inletting the barrel, drilling the ramrod, inletting the lock and triggers and band saw profiling the stock for a client and a broken wrist repair for someone else.  Once these projects are out of the way the side by side will start to move right along.  I wanted to build and inlet the barrels just to get that chore out of the way.

Tom,
I had a set of modern 20g barrels made in Spain that I started with.

Paul,
I will post some pictures of the fixture I made to hold the breech plugs as well as the breech plugs.  I have to pull the plugs a few more times to ream and hone the choke out of the muzzle as well as finish drilling the powder chamber holes to the correct depth once I locate the touch holes and then to case color harden.  I will be breeching up a couple more sets of barrels in a couple of months and will document the process in more detail.  This first set was a lot of seat of the pants engineering.

Ed,
I should get more proficient at doing this as I have a couple more sets of double barrels I have been collecting that I plan on breeching and possibly putting up for sale.
Logged

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Double barrel flintlock shotgun project
« Reply #9 on: January 14, 2019, 08:13:38 AM »
Very nice job David!  Just the kind of stuff that makes my mouth water....  ;D  Sending you a PM.

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Double barrel flintlock shotgun project
« Reply #10 on: January 14, 2019, 04:32:34 PM »
Good luck! I built 5 of those and swore them off for ever. I'm sure yours will be a dandy. Don't sell it, you'll regret it for ever.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline flehto

  • Hero Member
  • *****
  • Posts: 3335
Re: Double barrel flintlock shotgun project
« Reply #11 on: January 14, 2019, 04:43:43 PM »
Know very little about building flint  S x Ss  but noticed the long breechplugs.....will they be patent  breeches? Keep us posted on your progress.....Fred
Logged

Offline Long John

  • Hero Member
  • *****
  • Posts: 1618
  • Give me Liberty or give me Death
Re: Double barrel flintlock shotgun project
« Reply #12 on: January 14, 2019, 05:45:10 PM »
Dave,

You have just proved you are smarter than I am!  My flintlock double is a French gun made with two barrels I got from Robert Hoyt.  It took me 5 tries to get the barrels soldered together right!

I got delayed for a year by other things in life but I am now finding the time to continue the project.  I am almost ready to start the carving and engraving so you will probably be done with yours before I am done with mine.

Doubles are a "challenge".

Have fun!

Best Regards,

JMC
John Cholin
Logged

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1523
Re: Double barrel flintlock shotgun project
« Reply #13 on: January 14, 2019, 06:31:23 PM »
I have a set of old barrels that were given to me by a shooting buddy...and a good friend with a full-blown CNC machine shop...you really shouldn't be giving me ideas like this...

Now, the wheels are spinning...I just hope the hamster hasn't died...

Greg
Logged
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Double barrel flintlock shotgun project
« Reply #14 on: January 14, 2019, 08:06:25 PM »
 Dave.
   Did you cut those barrels off above the forcing cones or did you make some plugs to fit the cones???
Logged
Nobody is always correct, Not even me.

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Double barrel flintlock shotgun project
« Reply #15 on: January 14, 2019, 08:11:41 PM »
Quote from: David Rase on January 14, 2019, 06:06:53 AM

Paul,
I will post some pictures of the fixture I made to hold the breech plugs as well as the breech plugs.  I have to pull the plugs a few more times to ream and hone the choke out of the muzzle as well as finish drilling the powder chamber holes to the correct depth once I locate the touch holes and then to case color harden.  I will be breeching up a couple more sets of barrels in a couple of months and will document the process in more detail.  This first set was a lot of seat of the pants engineering.


Ireally look forward to that tutorial.


Best regards

Rolf
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15837
Re: Double barrel flintlock shotgun project
« Reply #16 on: January 14, 2019, 11:09:06 PM »
David R. - ainèt it great to be retired, with all that "just for me-time". LOL
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Double barrel flintlock shotgun project
« Reply #17 on: January 15, 2019, 12:34:29 AM »
Quote from: jerrywh on January 14, 2019, 08:06:25 PM
Dave.
   Did you cut those barrels off above the forcing cones or did you make some plugs to fit the cones???
Jerry,
I reamed the taper out of the forcing cones and then threaded the chambers with a taper tap and finished threading them with a modified bottoming tap. This gave me the slightest shoulder to seat the breech plug face on. 
David   
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Double barrel flintlock shotgun project
« Reply #18 on: January 15, 2019, 12:36:49 AM »
Quote from: Daryl on January 14, 2019, 11:09:06 PM
David R. - ainèt it great to be retired, with all that "just for me-time". LOL
Yep Daryl, I am living the dream.  Apprentice number 2 is due to arrive the first week in March.  I have not got apprentice #1 trained yet and he just turned 3.  It's all good.
David
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15837
Re: Double barrel flintlock shotgun project
« Reply #19 on: January 15, 2019, 02:55:05 AM »
LOL-  wonderful news, congratulations.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Double barrel flintlock shotgun project
« Reply #20 on: January 20, 2019, 03:16:20 AM »
Got to spend some time on the double barrel today.  I was able to install the tang onto the hooked breeches and rough file the tang. I also installed an extension on my reamer and built a guide so I can remove the chokes so the barrels can be loaded from the muzzle.  I have my hones standing by after the reaming is complete.  Hoping to get the barrels inlet this week but I have 7 to do for clients.











Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Double barrel flintlock shotgun project (updated 1/19/2019)
« Reply #21 on: January 20, 2019, 01:11:06 PM »
Looks great. Did you make the standing breech? If so, from what?

Best regards
Rolf
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Double barrel flintlock shotgun project (updated 1/19/2019)
« Reply #22 on: January 20, 2019, 05:30:43 PM »
David,
 In my experience, after you ream the choke out the reamer finish may be fine, a mirror finish isn't needed for a shotgun to shoot excellent patterns. Lowell Tennyson leaves a lot of machine marks in his jug and they shoot fine. Of course some folks just can't live with machine marks....so expect you'll hone yours out anyway. ;)
 I used to make my standing breeches out of ginormous angle iron. Cut it out with a freakin' hacksaw. Good Lord I'm starting to have waking nightmares just thinking about it. :o  I'm glad I quit making those things, everything about them is pure drudgery.

 You go ahead and have fun, I'll watch! ;D
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Double barrel flintlock shotgun project (updated 1/19/2019)
« Reply #23 on: January 20, 2019, 07:08:26 PM »
Quote from: Rolf on January 20, 2019, 01:11:06 PM
Looks great. Did you make the standing breech? If so, from what?

Best regards
Rolf
Rolf,
Because I have a milling machine in my shop I was able to mill the standing breech out of a piece of 1018 bar stock.
David
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15837
Re: Double barrel flintlock shotgun project (updated 1/19/2019)
« Reply #24 on: January 20, 2019, 11:11:23 PM »
Nice job, David. Bringing it to Hefley this year?
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V
Pages: [1] 2   Go Up
« previous next »